Jump to content
SAU Community

Recommended Posts

Its going to be hard to find a direct stock replacement.

You are better off picking up some larger denso/sard injectors off ebay (which are low imp) and buy a nistune board for his ecu.

I picked up some Sard 550cc GTR injectors for like $500. Throw in another $200 for the nistune board. $700 all up and opened the door for future tuning :)

His got a power fc at the moment but not yet installed. I told him to fit some ID1000/Bosch injectors as he will be looking for big power down the track.

Money is the issue at the moment, but I say do it once do it right.

His got a power fc at the moment but not yet installed. I told him to fit some ID1000/Bosch injectors as he will be looking for big power down the track.

Money is the issue at the moment, but I say do it once do it right.

Sell the PowerFC and use it to pay for injectors + nistune.

Sell the PowerFC and use it to pay for injectors + nistune.

You guys should chat, his name is Justin from the beach cruise and AGM if you remember.

How come you went the Sard's and not the ID/Bosch injectors as they are only about $100 per injector?

His got a power fc at the moment but not yet installed. I told him to fit some ID1000/Bosch injectors as he will be looking for big power down the track.

Money is the issue at the moment, but I say do it once do it right.

You say it wrong bruvva... gotta say: do it phaggot.

You guys should chat, his name is Justin from the beach cruise and AGM if you remember.

How come you went the Sard's and not the ID/Bosch injectors as they are only about $100 per injector?

ah yeah i remember. With the clean r32 GTR.

SARD's were the cheapest on ebay at the time, reputable brand and it was a direct replacement for GTR. (i had gtr stock injectors wired in which failed, so easier to replace with sard gtr's)

It's also good to replace the injector plugs as they will no doubt be coroded/rusted. Mine were green, no idea how any voltage went through it...

I failed E*P*A because the inspector told me my injectors should be red and not purple, so whatever he gets make sure to paint them to stock colour. However, he wont pass EPA with a powerfc whereas with a nistune and tuned to pass emissions will ;)

Used to dominate zombie horde! 200-3 and shit...

Mad fun playing the zombies, humans didn't stand a chance against zombie me, people actually stopped playing on the server :D

ah yeah i remember. With the clean r32 GTR.

SARD's were the cheapest on ebay at the time, reputable brand and it was a direct replacement for GTR. (i had gtr stock injectors wired in which failed, so easier to replace with sard gtr's)

It's also good to replace the injector plugs as they will no doubt be coroded/rusted. Mine were green, no idea how any voltage went through it...

I failed E*P*A because the inspector told me my injectors should be red and not purple, so whatever he gets make sure to paint them to stock colour. However, he wont pass EPA with a powerfc whereas with a nistune and tuned to pass emissions will ;)

I'll pass it on to him :thumbsup:

I was going to get 550's in and hop around with that for a while untill I get the power fc in and tuned. Now im just thinking I'll get the 750's slap em in got new pod filters waiting to go in, get a adjustable FPR and I'll put my power fc in and change oils untill I can get it booked in for a tune and most likely strap it to the back or a trailer and tow it down.i dears??

Me and a coworker just smashed Nandos $21 full chicken, seriously large chips and 1.5L coke meal for 7th consecutive day.

I think I'm gonna start sweating hot & bbq sauce.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm not up to date on the latest, but for basic modifications like pod filter, lower springs etc you can get a modification permit at the time of inspection.  For more serious modifications you will need engineering.  Intercoolers used to fall into the mod permit rule but its been a long while since i looked it up.   Either way you will be able to get it registered, just a case of $300 vs $3k . 
    • Hi everyone! I’m the new owner of a 1996 R33 GTS-T, I’ve purchased this car over from Queensland and brought it to Western Australia and I’ve found that there is a hole cut out in the engine bay for the FMIC that enters into the wheel well (fender liners are in the boot). For anyone that has had to get their car over the PITS here, will this be a major issue?   
    • Yeah I've spotted this one too, whenever it's lotto superdraw week and I'm browsing car sales dot com for my new ride They must be dreaming, maybe it's worth 150k for the link to Brock?
    • 100% accurate!  We are a pack of know it alls....  But, I bet people go to you when they have a problem! I've been on a bit of a clean up rampage too over the past month!  I've thrown more shit in the bin over the past 2 weeks than I have in the past 3 years combined! Anyway, it's all good fun being different! My wife sometimes does not agree!  
    • ADHD in all form isn't about "can focus, or can't focus" or is hyper active or isn't etc.   It's all a dysregulation. Either time feels to be stationary, or time just vanishes in a split second. We are either under focussed on the task at hand (as we're over focussed on our surroundings) or we have no idea an atomic bomb went off beside us as we're so hyper focussed and locked in on things.   Not to mention the rapid fire thought process. What it takes a "normal" process to think up a solution to a problem, ADHD will be able to give you 5 different ways to solve the problem, and the pros and cons of each. While we can be highly impulsive and lack the ability to "control ourselves" we can also become paralysed with the inability to make a decision for ourselves. While most of us have an OCD like requirement for perfection, we lack the ability often to remain focussed to get things to a perfect state. Those with undiagnosed ADHD as adults, can often find the last part actually stops them ever attempting to do things that they have the ability to do, as the reasoning is often "if I can't do it perfectly, it's not worth doing"   As for projects... Ha ha ha, I still need to take the other half of my wall trim down in the Fiance's office so I can paint it. Need to finish digging and running the back yard drains, my R33, getting the Ninja bike registered (now being sold), the moped project, fixing either of the lawn mowers so they're reliable, along with a myriad of other things.   It's why I've been going through lately and just being brutal and clearing projects off that I won't actually ever complete. IE, moped will go to the tip, or be given away, bike is being sold, Subaru project being sold, some parts for other projects given away. Or I've been making myself focus on one thing at a time, by ticking off the smallest quickest ones first.   There's also a reason by our mid twenties we seem to be "know it alls", as we've all been down some of the weirdest and oddest rabbit holes when you follow the dopamine trail. It's often also why we're more a jack of all trades, but not a master of one.   However, pretty much all of my hobby projects, in one way or another, all come back around to automotive. That's my zen area.
×
×
  • Create New...