Jump to content
SAU Community

Recommended Posts

Because 380 is HUGE power, not just big power ;)

Its also a massive % increase for just a tune

Lol have you been in a boss model yet? My manager has one and they absolutely hammer.. Didn't actually believe ford brought out such a powerful car from factory in AUS

380rwkw without mods? :mellow:

what do they weigh?

About 1800, maybe a bit less which is expected I guess for a big car.. got about 300kgs on my old GTR :O.. still do a tune and your in 11s.

Other vids online to back this up as well / all info on forums etc

Standard boost just drops off so much

They go alright:

This ones got a catback and a tune, nothing else

I met a bloke the other day selling a Callaway Corvette..90k if anyones interested..still left hook though

11 sec in stock trim and 200mph+ top speed

much the same as this one

http://www.youtube.com/watch?v=x8HyT4d7Kzc

Enjoy 380rwkw on pos stock tyres/suspension/brakes

When you bringing it to a meet Leigh?

Obviously upgrade the 245s, and will be doing brembos / suspension down the track as well

Whenever the next meet is !

Saving for a few months, what are they made of gold? Get a Blitz CS and stick with the standard plenum...

Lol studying full time+part time wages=not a lot of cashola.

Yeah I've read that that upgrading the plenum on a standard turbo isn't really worth it as I won't see any real gains but by doing it now with a FMIC it means I won't have to do it down the track and it'll support future mods better (ie. upgraded turbo). What I liked about the plazmaman plenum was that it retained the standard factory runners. Essentially I'm not after a car that's a dyno king rather a quick car with some good midrange torque.

interesting leigh!

the car was running 118's @ full weight, anyone know enough about boring/pointless/homo drag racing to derive a rwkw figure from that?

FWIW i ran consistent 119's with 325rwkw @ 1350kg

Going by that post, you do not need a plenum upgrade and are only wasting your money if you get one. And it doesn't sound like you have a big disposable income so why bother?

If you're not after a dyne king, rather a fast street car, turbos like a gt-rs are where you'd be looking, and you don't need an aftermarket plenum for that.

If you ever decide to get a turbo that does warrant a plenum upgrade, thats when you buy one...

interesting leigh!

the car was running 118's @ full weight, anyone know enough about boring/pointless/homo drag racing to derive a rwkw figure from that?

FWIW i ran consistent 119's with 325rwkw @ 1350kg

What about that fluke 190mph pass Ham? No need to be modest

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...