Jump to content
SAU Community

Recommended Posts

Looks like one of those Jardine exhausts. Charlie and I looked at a GSX1000 with Jardine tips, sounded awesome and very loud. It's a good subtle look if you have to have a side exhaust.

Not sure if deliberate

for the first time since i got the bike, mafkr fired up first time no probs. /bikes

I thought it auto syncs and you don't need to unlock.. I've never had to unlock the screen

not supported coz phone's not in "pc mode" or some crap. f**k it

Thank's to Fawkner Cemetery for closing down until 1pm tomorrow, now I can't even finish off the work we had planned

This Jill Meagher thing is seriously gone way overboard, it's not like she was the first woman to be raped and murdered

/end rant

it's pathetic.

for the first time since i got the bike, mafkr fired up first time no probs. /bikes

not supported coz phone's not in "pc mode" or some crap. f**k it

it's pathetic.

Tis, and it's not like were not considerate at work. Whenever there is a funeral we do stop work, but to close off a whole cemetery for more than half a day for one funeral is ridiculous

No-one else has ever had that treatment, even when Carl Williams was buried Keilor cemetery was still open.

I thought about giving her an earful of SS1PU, but then I thought...who am I impressing here...might as well be doing a burnout for a 10 year old kid.

i see your point and it was a celica n/a i'm assuming i wouldn't of bothered either ..but with guy in the ute he was looking and almost laughing at standard aussie muscle car driver thinks any jap car is four wheels and a body kit so i shut him up haha

So I've been thinking about changing direction for next year and I'd like to start a mechanics apprenticeship, only the catch is I don't particularly want to work at Greg's down the road which services Hyundais and Corollas day in day out. I'd rather work at either a performance workshop or a place which specialises in sports cars or fun cars for that matter.

Does anyone know some places that they could fire off that I could go and have a chat too?

I know it's very unlikely as their highly specialised but I've already thought about Racepace and Nizpro, the worst they could say is no.

Any other ideas?

So I've been thinking about changing direction for next year and I'd like to start a mechanics apprenticeship, only the catch is I don't particularly want to work at Greg's down the road which services Hyundais and Corollas day in day out. I'd rather work at either a performance workshop or a place which specialises in sports cars or fun cars for that matter.

Does anyone know some places that they could fire off that I could go and have a chat too?

I know it's very unlikely as their highly specialised but I've already thought about Racepace and Nizpro, the worst they could say is no.

Any other ideas?

chasers?

sabbadin?

So I've been thinking about changing direction for next year and I'd like to start a mechanics apprenticeship, only the catch is I don't particularly want to work at Greg's down the road which services Hyundais and Corollas day in day out. I'd rather work at either a performance workshop or a place which specialises in sports cars or fun cars for that matter.

Does anyone know some places that they could fire off that I could go and have a chat too?

I know it's very unlikely as their highly specialised but I've already thought about Racepace and Nizpro, the worst they could say is no.

Any other ideas?

Most performance workshops are 2-3 man operations with outsourcing for other roles (like fabrication, engine machining etc). Often performance shop owners are not actually qualified mechanics themselves (but can be qualified engineers etc). So you are unlikely to get any of them taking you onboard as a mechanic apprentice because of it.

From a business perspective it does more harm than good to take someone on in a small operation like that, even taking into account tax breaks and so on for doing it.

You'd best get qualified first, then move across as realistically. If you think a high performance workshop is interesting all the time you'll be in for a bit of a shock... A fair portion of it is general servicing and parts on/off just like @ a dealership. So take the make of the car outta the equation and a lot of it is the same.

So I've been thinking about changing direction for next year and I'd like to start a mechanics apprenticeship, only the catch is I don't particularly want to work at Greg's down the road which services Hyundais and Corollas day in day out. I'd rather work at either a performance workshop or a place which specialises in sports cars or fun cars for that matter.

Does anyone know some places that they could fire off that I could go and have a chat too?

I know it's very unlikely as their highly specialised but I've already thought about Racepace and Nizpro, the worst they could say is no.

Any other ideas?

http://www.skylinesaustralia.com/forums/topic/13305-local-wreckers-and-workshops/ enjoy

Most performance workshops are 2-3 man operations with outsourcing for other roles (like fabrication, engine machining etc). Often performance shop owners are not actually qualified mechanics themselves (but can be qualified engineers etc). So you are unlikely to get any of them taking you onboard as a mechanic apprentice because of it.

From a business perspective it does more harm than good to take someone on in a small operation like that, even taking into account tax breaks and so on for doing it.

You'd best get qualified first, then move across as realistically. If you think a high performance workshop is interesting all the time you'll be in for a bit of a shock... A fair portion of it is general servicing and parts on/off just like @ a dealership. So take the make of the car outta the equation and a lot of it is the same.

Fair enough that makes sense, thanks for your input I appreciate it.

In that case, would you not suggest looking for workshops in the SE Suburbs that specialise in Nissans / anything fun or sporty? Or just go wherever..

Good thinking, Thanks!

Edited by Borci88

My advice would be to find a specialist mechanical trade. And by that, I don't mean a workshop that is tailored to a specific make of car. I mean a specialist form of repair like gearboxes or engine or turbo rebuilds. This will make your skillset invaluable to the industry - particularly useful if you decide to go out on your own and start your own business.

Further down the track, you can look at a technological niche, e.g. DSG repairs for when all the current Volkswagens/Audis get purchased by people who can't afford the Volkswagen/Audi philosophy of "replace it for new" or they stop holding spare boxes for them.

The automotive workshop industry is fked at the moment. There are niche exceptions...but for most, i.e. general mechanics...if they aren't going broke, they are just getting by. Panel beaters always seem to be doing okay.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Hope the cans went down well at least 
    • 255 can't go wrong with the price.
    • When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...