Jump to content
SAU Community

Vic Wasteland Thread


R31Nismoid

Recommended Posts

I was more so talking about corner speed of that turn before the straight

So the tight right left b4 the straight

I'm in top of 2nd so for me that just under 110 (have to cut corner a bit and use heaps of curb on exit)

as soon as I have straighted out of corner I'm into 3rd

then 4th just after the start line

then make a sandwich and check my hair due to lack of acceleration for rest of straight..

Link to comment
Share on other sites

haha yeah it was ok, easy to make your's like that though or even better

I'll be more than happy with just that.. Would like to start when I come back from Fiji.

Keeping the car stock? Ain't no body got time for that!

Trying my hardest not to but not fun.

Link to comment
Share on other sites

Haha mine was a 3rd-4th pull, so i did not to bad 230awkw against 280rwkw

Also tephra mods ftmfw

Still remember that night

That's me being passenger in the white 34R

So the tight right left b4 the straight

I'm in top of 2nd so for me that just under 110 (have to cut corner a bit and use heaps of curb on exit)

as soon as I have straighted out of corner I'm into 3rd

then 4th just after the start line

then make a sandwich and check my hair due to lack of acceleration for rest of straight..

Richos cnr speeds according to his videos on that cnr is about 80km/h though :/

Link to comment
Share on other sites

It's cheap to get 230awkw, especially if you have full exhaust already

main thing is to get a 8mr or 9 turbo

Standard exhaust still lol. I'm just gonna buy all the shit I need and let it gather dust and do it all at once

Link to comment
Share on other sites

Just make sure when you buy an exhaust, buy a good branded one, all the shit ones (front pipe especially) tend to fit really badly or not at all

also this was the catback I ran, sounded really nice and not to loud

http://www.ebay.com.au/itm/Apexi-N1-Evolution-Exhaust-for-EVO-7-8-CT9A-4G63-/380458896342?pt=AU_Car_Parts_Accessories&hash=item58951e0bd6&_uhb=1#ht_842wt_1397

Link to comment
Share on other sites

Richos cnr speeds according to his videos on that cnr is about 80km/h though :/

yeah I get the feeling that I'm a little quicker though slower corners, lighter car and less lag due to set up.

high speed tho whole different matter.

Link to comment
Share on other sites

It's cheap to get 230awkw, especially if you have full exhaust already

main thing is to get a 8mr or 9 turbo

if I keep the 7 turbo and do the LICP, x3e exhaust, 8MR bov, 3port and tune how close will i get to 230?

just trying to ascertain how much i'll gain from the spend on the turbo

also for the lICP is it just the hotside that needs doing or both?

Link to comment
Share on other sites

yeah I get the feeling that I'm a little quicker though slower corners, lighter car and less lag due to set up.

high speed tho whole different matter.

Intradasting

You got a vid with data overlay?

Even billywhiz's s14 cnr speed is about 70km/h

Link to comment
Share on other sites

if I keep the 7 turbo and do the LICP, x3e exhaust, 8MR bov, 3port and tune how close will i get to 230?

just trying to ascertain how much i'll gain from the spend on the turbo

also for the lICP is it just the hotside that needs doing or both?

They reckon 220 with cams. 8mr is only like $350

Link to comment
Share on other sites

yeah I get the feeling that I'm a little quicker though slower corners, lighter car and less lag due to set up.

high speed tho whole different matter.

Is the Time %age gap between you and richo a lot lower on tighter tracks? and higher speed tracks he just blows you away?

Like... Haunted Hills vs PI, lol

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • For what it's worth (I'd never looked at the button closely enough to work out it has a person on it!) with the switch 'active' double-pressing the unlock on the remote will cause lights to turn on. As I recall it will cycle through plain-unlock, unlock-with-park-lights and unlock-with-headlights as you repeatedly double-press unlock.
    • I'm not defending Haltech. They had some golden years, but their history of problem products goes back a loooong time before that and now. My bro-in-law swore off them 15 years ago. Same stuff. Firmware bugs, patchy tech support complete with total ignorance of what was going on. Doesn't mean that there are not 5 or 6 other excellent options - most of which were also born in Australia.
    • mines a bit too fresh of a build, need to put more km on it before im ballsy enough to go further
    • I agree their STREET is limited in features, but both their RACE and PRO models have everything you could possibly need (I.E Knock, Built in EGT, Built in Wideband, Dual DBW, etc.) It's also cheaper in comparison with anything Haltech has to offer and more importantly from what I hear it actually works well.  I'm a little bias these days as Haltech has really turned into a pile of poop lately.. I don't know what's happening with their firmware team but I'm thinking it's outsourced and their cutting costs. There's always massive bugs, they're not doing any testing, there's no revision control (I.E They acknowledged a few months back that they accidently released an unfinished firmware). It feels like they're being run by bean counters vs actual software & electrical engineers. They seem to be to busy releasing new products as opposed to fixing software issues. As of 2-3 weeks ago they started a beta program to presumably op the rest of the end users out of unwillingly testing firmware's. I'm happy they're starting to listen to all the complaints. Hopefully it gets better fast. 
    • Any plans to seal it from the cabin? It will throw plenty of oil/grime over the years. On my auto to manual Stagea there is a custom ally sheet  to cover most of the hole then the standard rubber seal is attached to that to join to the shifter
×
×
  • Create New...