Jump to content
SAU Community

Recommended Posts

Ha, I had a mate at uni who took his set of $800 rims from his corolla to get some SLIGHT rash repaired... the bloke was a panel beater doing some rim repair work on the side...

Dropped them off and was told he'd be called the next day with a quote, gets a call a few days later saying "They're all done, that'll be $650... Come pick them up when you're ready"

And the prick was threatening to not give the rims back until it was paid in full.

Small claims court with evidence of an email from the bloke saying that he'd call with a quote first... = gets the rims back for "cost price" of $200 and the panel beater gets told to stop being a cock :P

Job was crappy anyway... paint was chipping and fading after a few months.

SO GO TO A QUALITY JOINT!!!

Ha, I had a mate at uni who took his set of $800 rims from his corolla to get some SLIGHT rash repaired... the bloke was a panel beater doing some rim repair work on the side...

Dropped them off and was told he'd be called the next day with a quote, gets a call a few days later saying "They're all done, that'll be $650... Come pick them up when you're ready"

And the prick was threatening to not give the rims back until it was paid in full.

Small claims court with evidence of an email from the bloke saying that he'd call with a quote first... = gets the rims back for "cost price" of $200 and the panel beater gets told to stop being a cock :P

Job was crappy anyway... paint was chipping and fading after a few months.

SO GO TO A QUALITY JOINT!!!

lol.

Pretty similar thing happened to a friend of mine.

Repaired 1 rim at a cost of about 900 dollars, but a new rim would have been 1100. He didn't take it to small claims though.

Agree with you re going to a reputable company. I've seen some pretty crappy jobs.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

Can these guys un-buckle rims? My SS-V has a slight buckle in one of the rims but it's actually on the outter lip (not the inside of the wheel that most people have).

Took it to the mob at Moorabin but the bloke said it can't be done :unsure:

The freshly painted rotor you dumbass

What's wrong with that? The brake pad will just take it off anyway...

I always do it, leaves a clean line rather than an imperfect masked circle..

I still don't see how that's funny. It's actually smart - unless he is expecting the paint to stay there..

A lot of rotors actually come out completely painted like that.

guy we used at honda was http://www.wheelfixit.com.au/ - i got a quote to do a full restoration on wheels i have personally, was 400$ per wheel, would take 2 weeks, or $150 per wheel for gutter rash which i think he could do within the day.

Not bad at all.

A lot of rotors actually come out completely painted like that.

My DBA4000's came soaked in that rust protection oil from the factory and had black painted centers which extended onto the rotors a bit...

Not once I got a bit of brake cleaner onto them to get rid of the oil :) Goodbye paint.

Yes, the brakes will get rid of the paint themselves, but I still would have covered the majority of it with newspaper and tape to stop the black from getting into the cooling vents, slots and dimples! That wouldn't be cleared by the pads right away...

Can these guys un-buckle rims? My SS-V has a slight buckle in one of the rims but it's actually on the outter lip (not the inside of the wheel that most people have).

Took it to the mob at Moorabin but the bloke said it can't be done :unsure:

I'm not sure if they can do that, email and ask :P

Not sure if prices have changed - been about 10 months since I got that last quote

My DBA4000's came soaked in that rust protection oil from the factory and had black painted centers which extended onto the rotors a bit...

Not once I got a bit of brake cleaner onto them to get rid of the oil :) Goodbye paint.

Yes, the brakes will get rid of the paint themselves, but I still would have covered the majority of it with newspaper and tape to stop the black from getting into the cooling vents, slots and dimples! That wouldn't be cleared by the pads right away...

Ever ran your finger nails through the slots to see how much crap comes out? Don't think a little paint is going to be a worry, and in any case the temperatures that the friction part of your rotors see is MUCH more than enough to take the paint off..

It will come off in the first 5 minutes of driving..

Oil is a different story, but paint? f**k masking it..

Yeah I pretty much covered my rotors, came off after bed in and looks neat vs masked ones that always seem to mask around the line in the center not the actual edge of the pad contact area and still end up with a rusted section :/

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • As an ex-skyline owner Going off how these things are now "modern classics", I would keep the twins and just "refresh" bits that are required for reliable power and have a car you can take out for a cruise whenever you get the itch As a idiot who cannot leave things alone Going deep into the "rabbit hole" is a easy thing to do, as previously mentioned, once you start it becomes a slippery slope, wirh lots of supporting mods, and possibly rebuilds, and unless you have a bottomless pit of funds, the car can spend most of its life sitting in the garage,  broken, waiting for parts, or building more funds For a classic like a R32 GTR Basically, a reliable OEM+ refresh, that isn't a broken garage queen, is alot better than a car that you build, then break, then fix, then break again And it isn't just the engine you need to worry about, these beasties are getting on in age, and all parts are getting, and have got, expensive, the days of picking up cheap replacement engines and other driveline parts are well and truly over The funds not spent on going a single with quality parts, and with all the other other bits required to make it happen, could be spent on refreshing alot of other parts A wise man once said "If you cannot afford 2 GTR's, you cannot afford 1", I also believe he said this about 20 years ago when you could pick up a clean R32 GTR up for around $20k My advice for a R32 GTR (the one and only true Godzilla in my mind) is to think holistically about the whole car, the body, the power train, the suspension, the brakes, and the driveline SAU is a wealth of knowledge with decades of Skyline experience,  from stock, to OEM+, to modified to varying degrees, to full on or weekend or dedicated racecars, as well as full on money pits that rarely leave their garage Treat the old girl nice and give her what she deserves, you are a lucky man to own such a classic car  
    • For that price you could buy the hypergear turbo (big fan as I run one) and the Haltech ECU..
    • +1 for the Elite 2500. Get some new knock sensors while you are at it (pretty cheap), look up the TAARKS Nissan knock sensor kit. You may also want to get new coils (R35gtr) while your at it (assuming your on stock ones), as they are a liability. Mine started right up and idled fine on the base map. Also go MAP over MAF, as said above, Haltech make this super simple right out the box. Another fanboy of DBW here, Outsider Garage from your neck of the woods make some nice conversion gear for the R33 (that’s where I got some of my gear from).
    • Nvm ignore this I read it wrong
×
×
  • Create New...