Jump to content
SAU Community

Recommended Posts

I have the HD hero and it fits; pretty sure it's a GoPro 1

ok looked it up

so the first of the gopro as we know it was acautlly the gopro Hero 5, SD ran on AAA batteries and 2gig card only,

This was my first one so guess that why I call it the first gen,

then the Hero 960 a higher res version

then they dropped the numbers and started calling them.

HeroHD,

HeroHD2

HeroHD3

go figure.

My R33 GTRST made it to work this morning :D It's around the corner getting an alignment as we speak.

Now, who can remember the Bedding in instructions for a newly rebuilt 1.5way with Nismo discs... Hamish?

I need to go and do 30 minutes of slow figure 8's in an empty carpark somewhere that police aren't going to show up and defect me for "doing hektic skids"... This will flatten and bed in the plates in the lsd center by moving/grinding them back and forth against each other.

Keep speeds down (like try to stay under 60 or so) for the next 1000km? This one is going to be tricky since its a daily (but I can take mainly 60 zones to get to work and back)

Not bad job...

Pretty happy. Roof bonnet boot was all white and faded from oxidation.

Yet to see car in sunlight

5y6a4u9a.jpg

upy3y7uj.jpg

nice...that red always does that...its a shocker...but gives good results when polished up :thumbsup:

so what machine did you buy ?

This is the car that killed my buff the other day...time for a new one...

blacjak3_zps236ae712.png

<br />nice...that red always does that...its a shocker...but gives good results when polished up :thumbsup:<br />so what machine did you buy ?<br /><br />This is the car that killed my buff the other day...time for a new one...<br />

Bought das6 pro. Man this shit takes a lot longer than a rotary. At work I could have finished this car in 3 hours. <br /><br />Took 9 hours instead. But it was a single stage paint and layer was fairly thin. So I didnt want to take off too much paint. So no heavy cutter. Gave it a nice coat with 22ple as well. <br /><br />Whatd u do to the 300c? Like stage wise. Did it have a ceramic clear coat?<br />

KAAZ_breakin.gif

Yep, this part I've got down pat...

What I'm wondering about is how crucial is the low speeds and how many km before I switch out the oil for the first time. Considering I'm using a "used" crown wheel, is the low speed stuff mainly to protect that if it was brand new?

Or would higher speeds affect the new LSD Center as well...

 

Yep, this part I've got down pat...

What I'm wondering about is how crucial is the low speeds and how many km before I switch out the oil for the first time. Considering I'm using a "used" crown wheel, is the low speed stuff mainly to protect that if it was brand new?

Or would higher speeds affect the new LSD Center as well...

 

think of it like bedding in brakes... I did this for 30 mins straight away then binned the oil and used motul comp 75w150

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The nissan manual says to change coolant every 2 years. Is this still necessary if you're using coolant like Penrite or nulon which has improved over the years? It says it lasts 500,000km which seems hard to believe lol.
    • According to the Muse website, totally different material. The originals were that horrible solid foam rubber that was used for a lot of rear spoiler/flap things, like on Mitsu Galan GSRs. Heavy, and with enough compressibility/flex that any paint on them would crack fairly quickly. The Muse ones are just ABS, which is obviously similar to GTR lower front lip, etc etc. ABS is a good choice if you have the ability to tool up for it. The only thing better might be TPU-RIM or something equivalent. The TPUs were good. Plenty of flexibility (in twisting, bending, etc) but not really in compression.
    • Update 24/01/2025:    Bought a GReddy/Trust Intercooler (crossflow spec-LS) that was meant for a R33 GTST $871 AUD shipped, and a GReddy Profec boost controller $483 AUD, both brand new from Japan. Being honest, I would've thought the intercooler kit was discontinued but I guess not yet. Decided due to funds + time, I'll stick with a nistune on this stock-ish setup ( stock turbo set to probably 10-12psi ) and have it run cleaner ( suspect the 3" turbo back etc has sh*tted on my economy ) for my trip down south soon for the WSBK. Hopefully I can get it all installed and tuned by then. As for who I am getting it tuned with, I will be going with Toshi, (not hearing back from DVS so scratch that). There is also Birrong Auto but not sure if they do nistune installations and if they even tune it... Otherwise, anyone know where I can get my hands on an aluminium intake/suction pipe for an RB25DET NEO?
    • The german cars I've worked on seem to have that issue(in more than just headlights). Mostly where hot, but also just the insulation hardening and cracking in various places. Not abnormal from what ive seen.
    • According to the Muse website, similar material, but not the same. Meant to help with stopping the paint cracking. In saying that, I had genuine ones on my last grt, and never had that problem.   Could you post pics when you get them? Very much thinking of buying the Muse ones over fibreglass.
×
×
  • Create New...