Jump to content
SAU Community

Recommended Posts

Most learned VWL, what's the go with allowing car registration to expire and then re-registering? Specifically wondering if there's any costs / need for RWC? I vaguely recall something about 3 months you can "re-reg" as opposed to "new-reg"... but assuming there is no way around the RWC etc. And if there's any additional re-reg costs... :S

All hard drive brands have their failures. I've got a faulty Seagate in mine, just cbf taking it out.

Didn't we swap that one over or remove it or something? can't remember now :(

I had an early model SSD die on me with a bunch of corrupted write errors, kept hosing my windows install... Friend of mine who built his PC at the same time had the exact same problem so we RMA'd them both... Serial numbers were 3 apart.

SSD Failures vs HDD Failures though, SSD's are awesome for reliability because of no moving parts... The Limited Writes isn't really an issue for home use unless you're using the first SSD's ever released.

^ This SSD SHIT on HDDs for reliability. ESPECIALLY on a laptop because its often moving places, placed down on desk etc.

Dezz do yourself a favour and make sure you get an SSD, heaps better than a normal HDD.

In terms of computer shops checked out scorptec? good service with decent prices.

your 1 year of rego starts on the day the rego expires, should you wish to rereg.

if you wait 2 months to re-reg, you'll have 10months of valid rego left, and still pay that 700ish.

This sounds a bit ridiculous. Having to pay registration for the months where it's unregistered = lolwut. Dat VicRoads cash grab.

when rego expires then you cannot drive car anymore.

if you pay it within 3 months then car rego again and all good.

after 3 months removed from system and you have to get full RWC and re-register the car

This is how I assumed it'll be. So if it's within 3 months, you DON'T need to grab an RWC, and just need to re-register the car? No extra fees? HOWEVER, then with regards to what Alvin said, you will be paying registration for 12 months starting from the ''initial" date it expired... as opposed to paying registration for 12 months starting from the date of re-registration ?

For example, lettuce say that registration expires 01 January 2015.

Scenario 1:

> Cannot drive vehicle as reg is expired

> As long as you "re-register" vehicle by 01 April 2015, you do not need RWC

> However, registration for "12 months" will only last until 01 January 2016

Scenario 2:

> Cannot drive vehicle as reg is expired

> Brand "new" registration required if registering vehicle AFTER 01 April 2015; RWC needed

> For argument's sake, say you do this registration on 02 April 2015

> Registration for "12 months" means this will be valid until 02 April 2016

These are the two possible alternatives?

This sounds a bit ridiculous. Having to pay registration for the months where it's unregistered = lolwut. Dat VicRoads cash grab.

This is how I assumed it'll be. So if it's within 3 months, you DON'T need to grab an RWC, and just need to re-register the car? No extra fees? HOWEVER, then with regards to what Alvin said, you will be paying registration for 12 months starting from the ''initial" date it expired... as opposed to paying registration for 12 months starting from the date of re-registration ?

For example, lettuce say that registration expires 01 January 2015.

Scenario 1:

> Cannot drive vehicle as reg is expired

> As long as you "re-register" vehicle by 01 April 2015, you do not need RWC

> However, registration for "12 months" will only last until 01 January 2016

Scenario 2:

> Cannot drive vehicle as reg is expired

> Brand "new" registration required if registering vehicle AFTER 01 April 2015; RWC needed

> For argument's sake, say you do this registration on 02 April 2015

> Registration for "12 months" means this will be valid until 02 April 2016

These are the two possible alternatives?

senario 1

I've done it with the mustang now and then as it been off raod for 4 years.

Haven't looked at the links yet, but sometimes the CPUs can be slightly different models, screen size might be the same say 15" but different resolutions (higher resolution = better / clearer) and some may only have on board graphics, others might have an additional card. (nvidia or ati)

edit: checked your links quickly, aren't they all the R750JV-T4207H?

Edited by UNR33L

Ishan come to me when you've (stupidly) paid rego on a car that doesn't exist for 5 years just to avoid getting a RWC again...

Didn't we swap that one over or remove it or something? can't remember now :(

Nah we took out one and gave it to you cause I was feeling charitable with my three hard drives. Then one of the ones we left in there carked it lol

Haven't looked at the links yet, but sometimes the CPUs can be slightly different models, screen size might be the same say 15" but different resolutions (higher resolution = better / clearer) and some may only have on board graphics, others might have an additional card. (nvidia or ati)

All have the same CPU spec listed (Intel® Core™ i7-4700HQ Processor (6M Cache, up to 3.40 GHz) / Leap motion)

All screens and resolutions the same except the JB one being 15.6" vs 17.3" for the others... and all have the same Nvidia 4gb graphics card

senario 1

I've done it with the mustang now and then as it been off raod for 4 years.

Interesting.

Ishan come to me when you've (stupidly) paid rego on a car that doesn't exist for 5 years just to avoid getting a RWC again...

Haha wut. It's not that RWC is a huge deal, as-is should pass no problems at all as it did some months ago. Just the registration timing atm is not ideal for me - as if it were delayed say a month~ish, I can have dat dere concession reg pricing. But if there's fees such as just getting a RWC etc, gotta weigh up whether that time + money is worth the saving (not to mention the fact I couldn't drive it for x amount of time).

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...