Jump to content
SAU Community

Recommended Posts

not to mention... a chef worth his salt will buy entire cuts and break them down himself which means he has a wide variety of choices to give you

take a ribeye for example.

so you clean up the whole thing and portion it. as the you go along the rib the steaks get progressively tougher and leaner.

so what happens is the shitty fat free tough as old boots ones get put in their own special pile for well done steaks and rude customer (or those that come in at close) then the chef has his little collections of the remainder with varying marbling, sinews etc.

you order the correct doneness and he will get one of the better ones.

you tell the waiter to "just let the chef cook it" they will go straight to the "piece de resistance"

Because ultimately, "rare" is subjective.

The guy doesn't know you, he only knows the 99% of other people that have come through and asked for "rare"

The only way you could ever really get it right, is if you go to a place and either

a) Luck out
b) go there enough times that you know what a baseline is for how they cook their meat

Same applies to "spicy" too

easy. bring me a steak. make it rare.

simple. could be f**king 4 inch thick or half inch. i want it rare. simple as fark.

every other flamin mongrel in the world at top restaurants can do it. why is it so hard in australia.

because a rare ribeye / scotch fillet for example is pure shit. it has fat that hasn't broken down and tastes like ass

a rare eye fillet is great on the other hand

Because ultimately, "rare" is subjective.

The guy doesn't know you, he only knows the 99% of other people that have come through and asked for "rare"

The only way you could ever really get it right, is if you go to a place and either

a) Luck out

b) go there enough times that you know what a baseline is for how they cook their meat

Same applies to "spicy" too

It's really not. See chart below

DonenessGuide.gif

Sure there are in betweens, but you're not gonna whinge about a shade lighter or darker as long as it's closer to what you want.

should have been more specific there.

f**kING RARE.

I DONT GIVE A SHIT WHAT YOU THINK.

f**kING RARE.

chicken pork beef snail horse pigeon rabbit human.

rare. because thats what i asked for. and because your job is to cook food for me how i ask for it.

(i seem to have some hang ups about the quality of chef in this country hamish, this in way states i think your shite, im sure your a lovely chef, and that you trained at the fluer del loo de laeeuriruf french word and you meat is magnificent)

however of the 100 plus steaks ive eaten in this country about 2 have been cooked rare... and most have been shite. sure 90% of these restraunts where not "hipster class" but still give the people what they ask for man.

rant over.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...