Jump to content
SAU Community

Recommended Posts

ok so looking for some Vic knowledge.

guy we were at dinner with galimed some Skylie experience.

apparently owns from his desesed faters estate:

a R33 GTR with 7K kms.

Plus a heavily worked R34.

Built by a workshop in Plenty

Hollinger sequential gear box, engine rebuild turbo, blah blah blah.

and done a lot of "private" track days. so Driver dynamics and such.

Silver.

myself and flying fridge, (another SAU Motorsport guy) have never seen nor heard of these...

called bull shit.

guy is apparently going to call us to examine cars.

any-one heard/seen these.

And Hamish/Martin, I'm at a pub in Budapest and they serve a HB Munchen with a slice of lemon on top, is it normal?

Cos another place, they also have HB Munchen but they don't serve lemon on top...

yeah larger is a bad sign

the point of the lemon is to mask the off smell it corona is bottle fermented so has a yeasty small, the lemon hides that...

if it the same beer it could be a culture thing, or a more ulterior motive.

If you spill any beer on your blouse you can use the lemon to stop it staining

Oh?

Not that I care about beer spilling into my clothing, I often rub my jeans when I've got bit of a spill on my hands.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
    • Turbos don't require pulling the motor apart so that's "easier". I would recommend the Nismo R3 turbos instead if you want to do stock twin turbo. It doesn't make as much power as the 2530s but it's only like ~50 whp off the mark and should have better response (ball bearing CHRA, slightly smaller turbo). A local that went with a Garrett G30 and 6boost manifold recently nearly burned his car to the ground after the hood insulator started melting and and burning so if you go single turbo I recommend doing a lot of research and validation work to make sure you don't do the same.
    • New rear lights, filler panel sprayed, cleaned and back together    before, during, after shots 😍
    • 100% is gyprock, I agree. Slip of the keyboard. Haha! I left my indicator bulbs out to save a bit of weight.
×
×
  • Create New...