Jump to content
SAU Community

Recommended Posts

You don't need new anything, you need a fuel system that supports the flow capacity

If your current stuff can do that then you can keep it

New lines and rail are unnecessary, pump and injectors is all that really needs an upgrade assuming your current ones are unfit

well that would be stupid if he has something that will obviously not make it, like 500cc injectors for example

he would just have to pay for tuning twice....

although that WOULD be a fairly Mohsen result

  • Like 1

What injectors / fuel pump / etc are in the car at the moment?

You're not making insane power so don't worry about lines / surge tanks / rails at all.

I would look at estimated power levels and install injectors and fuel pump to suit, before the E85 tune, or you'll be back to Racepace 5 times over the next 2 months and complain about it every step of the way.

well that would be stupid if he has something that will obviously not make it, like 500cc injectors for example

he would just have to pay for tuning twice....

although that WOULD be a fairly Mohsen result

exactly.

car has
walbro 255lph pump
stock injectors
stock rail.
wouldnt take any more ignition timing and detonated when more boost was added. so gonn get some cam gears and hopefully solve that problem.

current wish list is z32s, id1000s, cam gears and some brand new coil packs.

car has

walbro 255lph pump

stock injectors

stock rail.

wouldnt take any more ignition timing and detonated when more boost was added. so gonn get some cam gears and hopefully solve that problem.

current wish list is z32s, id1000s, cam gears and some brand new coil packs.

call scotty right f**king now.

Someone did that in the test lol

Object fixation is a bitch

Never look at where you don't want to go lol, at least until you're experienced enough to control the bike independently of your vision

Object fixation is a bitch

Never look at where you don't want to go lol, at least until you're experienced enough to control the bike independently of your vision

I'll know when I'm there if I don't hit a pole after looking at it

Can't remember what color is what... Then Broadfords colors are different again just to make it worse

From memory white is slow / inexperienced, green is moderate / experienced (2 minutes and above laptimes), red is balls out / below 2 minutes.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Use a 2' length of hose (that's 2 foot, not 2 inches) as a stethoscope to localise the source of the ticking. From cam covers? From exhaust or turbo manifold gasket? From injectors? From lower down in the engine? Etc. Use a timing light to set the timing. Put Redline Lightweight Shockproof in the box. It's not the very best thing for the box, but it will take a box that refuses to engage a gear with other oil, and make it engage a gear. I had to put it in when I installed the R33 box I have in my car. It would not select ANY gear when running. Smurf jizz made it work. That was >10 years ago and I still use it. I'm stuck with it now. Failing that - rebuild the box.
    • Well done Duncan. The fuel tank bulkhead lid is also in great condition (some of mine were stuffed). These are now out of production and good ones like that are becoming hard to come by.
    • Wow that's a steal, you've done well there. 
    • Exterior LEDs R34 2Dr R34 4Dr Position Lamp T10 T10 Winker front T20S T20S side T10 T10 rear T20S S25S150 Anti-hyfla relay TYPE3 TYPE3 tail T10 T20W Stop Lamps T20W T20W High Mount T16 T16 back T16 T20S number T10 T10 trunk T10 T10 Interior LED Item No.     Map Lamp BA9S single-sided     Room Lamps T10×31     Trunk Lamp T10     meter Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     Liquid crystal section T6.5 pedestal     Winker T6.5 pedestal     High Beam T6.5 pedestal     3 SERIES METER Early T6.5 pedestal     final T6.5 pedestal     NISMO T6.5 pedestal     air conditioner Early Liquid Crystal T3     Late LCD T4.2 Short     button T4.2 Middle     Hazard SW T3 Pedestal Short     Keyring T5     Cigar Socket T5
    • Howdy all,   I had my rb25det S2 rebuilt and finally started it today but have run into a few issues  Engine sounds like a a diesel easiest way to summarise like small ticking, gets louder when revs are slightly adjusted  The engine builder repainted the engine cover leaving no where for me to go off with lining up the CAS so have it as central as possible so not sure it that could be affecting it?, changed the gearbox fluid too but won’t seem to go into gear when running, and only 1 to 4 when off having a hard time finding 5th and reverse anyone got any ideas or a base for me to start off? much appreciated 
×
×
  • Create New...