Vic Wasteland Thread

[joeyjoejoejuniorshabadoo]

thats right, too many people been there before for you eh?

*replies with snappy "your mom" zinger

[HEKT1K]

But dat r34 gtr doe #race #rb26 #gloves #e85 #race day # race helmet #security guards #fastest car # most exclusive car

I lold

[Plattsy]

replies with generic "i would have been your dad, but the dog beat me upstairs" one liner.

[Leroy Peterson]

so went to MiColour to discuss painting and fitting of body kit for gloria... learnt some things about the do's and don'ts of fibreglass body panels.

but now its time to weigh up whether its worth the cost... can anyone recommend a place worth chatting to? im prepared to pay for quality work, but in Mick's words "How long is a piece of string?" can go very very long when trying to make possibly warped fibreglass "fit" nicely. (im preparing for the worst, hopefully it should be pretty good)

on a side note, S14 at micolour getting the whole sha bang-a-bang has some serious money put into it. like so serious i couldnt believe its to be used a street car only. on a S14 that had hit a pole on the rear quarter. the fenders were made by Mick and will fit 11" wide tyres once some tubbing was done.

[Rekin]

so went to MiColour to discuss painting and fitting of body kit for gloria... learnt some things about the do's and don'ts of fibreglass body panels.

but now its time to weigh up whether its worth the cost... can anyone recommend a place worth chatting to? im prepared to pay for quality work, but in Mick's words "How long is a piece of string?" can go very very long when trying to make possibly warped fibreglass "fit" nicely. (im preparing for the worst, hopefully it should be pretty good)

on a side note, S14 at micolour getting the whole sha bang-a-bang has some serious money put into it. like so serious i couldnt believe its to be used a street car only. on a S14 that had hit a pole on the rear quarter. the fenders were made by Mick and will fit 11" wide tyres once some tubbing was done.

DT Panels is another option.

[emts]

anyone know who Juliette just got her 86 fixed at?

[Leroy Peterson]

some place near Clayton. cant remember the name. maybe PK Panels in Huntingdale?

DT Panels is another option.

was hoping to find an alternative to DT Panels.

I swear Odie has been to a place a while ago that was good (other than Micolour)

[dezz]

You mean there's another good panel shop in Victoria that isn't micolor?

Surely not

[HEKT1K]

Micolour's work was so good it got my car stolen

Edited January 5, 2015 by HEKT1K

[Odium]

I swear Odie has been to a place a while ago that was good (other than Micolour)

Nope... Only bodywork that I've had done is getting my passenger door replaced after a woman backed her car out of her driveway into it while it was parked.

Insurance job via JCI and went to the lowest bidder (a place on Princes Highway Springvale). Paint was well matched (though, its a flat white, so not that hard really) though everything else was horrible... Snapped a few of the door card panel clips and didn't replace them when swapping it onto the new door, power window is a bit flakey and only works 90% of the time, power mirror hasn't worked since, window was so out of alignment that letting the door swing shut would make it stop with 10cm to go...

JCI said to call the workshop and book it back in for them to fix it. Workshop said to call JCI and book it back in for them to fix it (ETA a week), I said "Hell no you're not getting it back for another week" and fixed a bunch of it myself. Mirror is still dead in the water...

[Tony Olsson]

so went to MiColour to discuss painting and fitting of body kit for gloria... learnt some things about the do's and don'ts of fibreglass body panels.

but now its time to weigh up whether its worth the cost... can anyone recommend a place worth chatting to? im prepared to pay for quality work, but in Mick's words "How long is a piece of string?" can go very very long when trying to make possibly warped fibreglass "fit" nicely. (im preparing for the worst, hopefully it should be pretty good)

on a side note, S14 at micolour getting the whole sha bang-a-bang has some serious money put into it. like so serious i couldnt believe its to be used a street car only. on a S14 that had hit a pole on the rear quarter. the fenders were made by Mick and will fit 11" wide tyres once some tubbing was done.

Saw that s13 when I had some working getting done out there and it was a little insane! Kinda want it

[emts]

come to the dark side......

[joeyjoejoejuniorshabadoo]

pics or it didn't happen

[Borci88]

A45 AMG is pretty quick though!

In saying that 230kw on e85 on the r34GTR

Probably similar power to weight to the tuned stock turbo'd R34 GTT which makes 200rwkw at around 1,400kgs

But dat r34 gtr doe #race #rb26 #gloves #e85 #race day # race helmet #security guards #fastest car # most exclusive car

Yeah this part I don't really understand. I had low comp cylinder 1 in my 32R, and stock with 14psi on 100octane it made 250rwkw... On E85 that 34 should be making 300rwkw at least. I don't think a hub dyno would have robbed it of 70kw... Something's not right there!

[Leroy Peterson]

Which one has low power? The white one?

[Odium]

rr8ted I believe... chasers (i think it was) posted up a picture of it (so roller, not hub)

[Miguelone]

Dino Dale Carbonara Jr.

[Sunkist]

I'm suprised with the exclusivity of his GTR, he didn't have it escorted to Japan for its tune by security guards.

[Birds]

All 34R qualified mechanics must be SAS reg trained former NASA lead engineers and have obtained at least certificate 2 in crowd control / security operations to work on the vehicles

Which is why it's so hard to find a place who can get you more than 230kw at the wheels

Bahahaha 230kw, seriously? I feel sorry for the guy's hired wife and kids

[joeyjoejoejuniorshabadoo]

Yes but they are gtrawkw