Jump to content
SAU Community

Recommended Posts

What sort of times and top speed do you get up to on your motorbike?

I've seen around 250 on my speedo down the front straight, I'll have GPS speed next time though so I'll get back to you after my trackday there on the 27th. Should be able to get more speed with my latest mods, but will be cloesr to topping out so it'll be interesting, hopefully doesn't hit the limiter down the straight.

Times, my best so far was a ~2:05 I think... I take a few seconds off every time I go usually, but obviously that'll slow down as I get under 2 minutes.. My quickest mate does a 1:40-1:41, another around the 1:47 mark and then a few in the 1:55 region...then a few slower than me and one around my pace, at Broadford at least..

Stock fuel lines are fine in skylines

Might not even need pump and injectors as your turbo is only small anyway

Currently have a Walbro 400L E85 Compatible pump, and 550cc injectors and new fuel line in the engine bay... I've heard that you should get the proper E85 line for inside the tank though, since the inside of most lines can handle it, but the rubber on the outside generally doesn't last when its submerged.

Chris made it make a happy 278rwkw on 98 (then pulled back for track safety), and then the intake manifold gasket pushing out the side made it want to detonate on the straights at Rexmas. So going to fix that up and chuck some E85 at it to see how it likes it, either the turbo will taper off or injectors will max out. Hoping for the magical 300 so I don't start breaking other things while I'm out there.

ouch. Why not throw in a remax steel while youre at it?

For the $330 for the gears + $400 for the pump I may as well just get a better pump. On top of that car needs to be done by the end of the week so couldn't wait around for the gears.

It'll be fine, N1's only really break if it's an aftermarket balancer, or you get really unlucky.

  • Like 1

I've seen around 250 on my speedo down the front straight, I'll have GPS speed next time though so I'll get back to you after my trackday there on the 27th. Should be able to get more speed with my latest mods, but will be cloesr to topping out so it'll be interesting, hopefully doesn't hit the limiter down the straight.

Times, my best so far was a ~2:05 I think... I take a few seconds off every time I go usually, but obviously that'll slow down as I get under 2 minutes.. My quickest mate does a 1:40-1:41, another around the 1:47 mark and then a few in the 1:55 region...then a few slower than me and one around my pace, at Broadford at least..

250km/h is bloody quick!

A mate of mine just came back from PI; his first time there and second track day...lodged a 2:17 for the day. I imagine he'll be cutting off a few seconds ala dezz with the next visit. Jelly cause I was supposed to go with him :(

As for ethanol, all you need is a fuel pump and injectors that can deliver it fast enough, and a tune / whatever mods to support your power.

That's it. The rest is a wank. Uncomplicated science that people - usually those who aren't running the stuff - make into a big ol' Poirot murder mystery.

I'm all about that E85, 2 years now, no treble.

  • Like 2

Speedos lose their accuracy above a certain speed; it's unlikely anyone looking at a speedo 200+ down the main straight of PI is actually doing that speed. GPS only way to tell.

I think it's easier for cars to come out of that last sweeper onto the main straight with more speed already built up.

Plus 600s die in the ass above 200, top out around 260-270.

aye ric
http://www.ebay.com.au/itm/Vl-turbo-/141531162467?pt=AU_Cars&hash=item20f3ea2763


lets go halfies, slam it on its guts, with a fat as f**k dose, just cruise around and flutter bitches.

aye ric

http://www.ebay.com.au/itm/Vl-turbo-/141531162467?pt=AU_Cars&hash=item20f3ea2763

lets go halfies, slam it on its guts, with a fat as f**k dose, just cruise around and flutter bitches.

That's quite nice.

As for ethanol, all you need is a fuel pump and injectors that can deliver it fast enough, and a tune / whatever mods to support your power.

That's it. The rest is a wank. Uncomplicated science that people - usually those who aren't running the stuff - make into a big ol' Poirot murder mystery.

I'm all about that E85, 2 years now, no treble.

I had the chance to put BioFuel lines in my car today with the engine out, opted not too because you're right, it's not needed!!

aye ric

http://www.ebay.com.au/itm/Vl-turbo-/141531162467?pt=AU_Cars&hash=item20f3ea2763

lets go halfies, slam it on its guts, with a fat as f**k dose, just cruise around and flutter bitches.

Not gonna lie, it looks like my first car hnnngg..

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • AFM looks to be a z32 The injectors maybe old Nismo 555cc The turbo tag when looked up seems to be a gt2871 , imagine it would have the bigger rear housing .82 all look like the mid 00's mods when he started building it up. Vac hose seems right but would need to see a diagram. Great work going up there and sorting it out, be a good club car for someone wanting a good reliable rig.  I know I would like to have it but no space and too many other race cars at the moment.
    • Heys guys I got a r32 gtst speedo is out by 10kph seems the faster I go the more it be out  just seeing if anyone else had to problem and knows how to fix it 
    • I can't agree. If we hadn't all been brought up with the noise caused by the inefficiency of an ICE, no-one would actually ask for all that. An EV is like any other car, it just goes better. 
    • 2 more things I have to work out Easy one first...can anyone describe how to pull the fuel pump and sender from a 33? I can feel there is some sort of mount and clips but don't have a manual and don't know the trick......if not I'll spend some quality time in the boot witha lighter tomorrow. Second question is harder.  He had changed the upper plenum to a plazmaman but clearly got to a point with the vacuum hoses where he said "f**k it, I'm going inside for a beer" and never came back to that job because it was a mess. Am I right to think that I need: 1. Pre throttle (16mm nipple on inlet) to AAC's main 20mm fitting as the main pre throttle feed 2. ACC has a second 13m outlet joined to that 20mm fitting which I think is the pre throttle air supply for the cold start valve? 3. Cold start valve's outlet fitting then goes to Plenum (to bypass throttle?) There is some adapter on the back of the ACC with 2 fittings (13mm and 10mm), do I run the 10mm through a 1 way valve to the Brake Booster (4) and the 13mm back to a 13mm nipple on the Plenum as the Idle control (5)? 6. Run a 6mm vacuum line from the Turbosmart BOV to the Plenum? 7. Run a 5mm vacuum line from the Fuel Pressure Reg to the Plenum? 8. Run a 5mm vacuum line from the Turbosmart Boost controller to the Plenum? (Wastegate already has a pre turbo pressure source running to the solenoid then the wastegate on the other side of the bay)  Any help appreciated, the GTR is quite different setup and while the Stagea also has FFP it is different again. (And no Dose, I'm not pissing it all off and putting a ethrottle on it....)
    • OK, onto some questions to try and speed up the process a little. Does anyone know what core this Garret is? I know it is a high flowed standard turbo but nothing else about it. Tag says OK 0169J - 446179-5032 Same question for the injectors, I don't know what they flow and ideally can work it out before it hits the dyno, they are a mustard yellow side feed
×
×
  • Create New...