Jump to content
SAU Community

Recommended Posts

I don't even want to know what it's cost me over the past 5 years... if I put my fingers in my ears and hum really loudly, I might be able to pay for a few extra little bits and pieces to get it going again.

All I know is, it's progressed into a real pig to drive, but I love it every time I drive it (especially now that I don't drive it every day)

i feel the same. but the car has always not been the friendliest to drive.

and even after the money ive spent on it making it an even better car, the shit from bad workshops/previous owner are still biting me in the arse.

Should probably book it into FPV brah... they'll know what they're doing

not sure if sarcastic or not here.....

but FPV is long gone...

http://www.caradvice.com.au/259265/ford-falcon-xr8-return-2014-fpv-winds/

take it to ford and get the apprentice that does the work on fiestas to change them and test drive it....

it's not hard but if you f**k something up is a royal pain.

for a daily just take it to any reputible palce,

RaceBrakes is near me and used them a bunch of times

http://racebrakes.com.au/contact-us.html

Anyone know if 33R series 3 lip will fit a series 1/2?

Straight bolt on, remember you'll need the brake ducts as well to make it all work properly. Early lip was actually offered as an option for S3's lol. I guess some people didn't want dat reduced ground clearance.

not sure if sarcastic or not here.....

but FPV is long gone...

It was a triple sting....

1. How do you not know how to change brake pads?

2. Why would you take it to a workshop and pay instead of spending half an hour learning with someone who does know whats up (wouldn't recommend experimentation learning with brakes for obvious reasons)

3. FPV.

It was a triple sting....

1. How do you not know how to change brake pads?

2. Why would you take it to a workshop and pay instead of spending half an hour learning with someone who does know whats up (wouldn't recommend experimentation learning with brakes for obvious reasons)

3. FPV.

Volunteering to help out me out are ya? :P

Straight bolt on, remember you'll need the brake ducts as well to make it all work properly. Early lip was actually offered as an option for S3's lol. I guess some people didn't want dat reduced ground clearance.

Yeah I find the s1-2 lips nicer, s3 looks way to beefy at the front with nothing on the sides/rear with that lip

Mohsen didnt just not have insurance. He cancelled it because he wanted to look for a better deal.... and kept driving

Baaaahahahahahshshahsaaa

HAHAHAHAHA

Straight bolt on, remember you'll need the brake ducts as well to make it all work properly. Early lip was actually offered as an option for S3's lol. I guess some people didn't want dat reduced ground clearance.

Are brake ducts different across series? I have my series 1 ducts. Either my eyes are shit or I can't tell the difference between the S1/2 and S3 aesthetically.

There are JUN style carbon lips on eBay for $400, whilst I don't wanna spend that much on a lip, that's what the series 3 guy was chasing for his with slight cracks underneath it.

Wonder how it'd look.

Wish I could find a series 1, that looked the best.

I'm sure I've posted it before, but why is anyone surprised when mohsen, a retard, does something retarded?

Well it's not so much that it's a surprise that he is a retard but the seemingly never ending depth of his retardedness

Ealy lip also has the disadvantage of collapsing at high speed though.

Oh really? Well a nicer looking lip though

I'm sure I've posted it before, but why is anyone surprised when mohsen, a retard, does something retarded?

No surprises, just hilarious

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
    • Yeah, my offer was more to show exactly how rough and ready the rig can be and still be useful. Youtube vids will definitely show cleaner setups. Same concept though.
    • I would guess the seal has gone down at the speedo drive and gearbox oil has crept up the drive cable sheath and fouled the speedo head.
    • Any updates on this? Although not a stroker, nor built especially loose, my car has the exact same symptoms. Although I feel they were not there to begin with. Since rebuild with forged parts I have done about 40k kms and it feels like during the last 15k or so, the oil consumption has gotten progressively worse.  Compression test showed - what I thought at least - similar 10-10.5bars in each hole without oil. I have not yet done blowby test though, due to limited garage access. #2 plug is the looks the most foul and that was the one with 10bars. Nothing in the breather tank. I only recently disabled PCV and left only the hoses running from the valve cover via smallish tank to turbo intake pipe there and did some mildish 2nd gear pulls so the car was definitely on boost (1.4bar or so). Removed a hose from the tank and it was basically dry - meaning, the wipe I used had basically no oil on it. Last time I checked, the turbo and IC piping seemed dry as well (will have to see about that again after those pulls). For the past year and a half though, the car has been driven like a granny would for 99.99% of the time, since it mainly serves the purpose of carrying the family around nowadays. A lot of slow, stop and go city driving and most of the trips it barely sees any boost, but gets up to temp properly every time. Although there can be weeks it is not started at all. The car does not smoke, or at least not that I can see. (CAT is in place though). There is slight visible sweating at the Ex cam cover seal and I recently tightened the oil cooler lines as there was some mist on them too. It runs and idles extremely nicely and feels all around healthy. Like TurboTapin, I too am suspicious of my turbo. I have had IC pipes pop out from 1.6-2bars of boost a half a dozen times during the years. The turbo is a HX35/40 hybrid. So, a very similar mystery. Around 1500kms and a litre of oil surely cannot disappear to thin air. Apologies for the wall of text, not sure if any of the above is useful for best guesses/things to check next.  
×
×
  • Create New...