Jump to content
SAU Community

Recommended Posts

Oh sorry... I should have been more clear and less "amateur"...

If you want a red nike air max 90 and aren't a complete sucker, you can get them from Nike id in your choice of 2 ever so slightly different reds than the ones dezz paid a kings ransom for, however you won't be able to say they are the "independence day pack" on sneaker-loser-douchelord forums.

Better?

Oh sorry... I should have been more clear and less "amateur"...

If you want a red nike air max 90 and aren't a complete sucker, you can get them from Nike id in your choice of 2 ever so slightly different reds than the ones dezz paid a kings ransom for, however you won't be able to say they are the "independence day pack" on sneaker-loser-douchelord forums.

Better?

Imitation is the highest form of flattery. The 'ever so slightly different reds' are not even close to the same either.

And they'll always know they couldn't afford the real thing :)

You keep telling yourself that Bill Gates...

We are talking a couple of hundred bucks here, more likely those people just have more sense than to spend that on sneakers...

You keep telling yourself that Bill Gates...

We are talking a couple of hundred bucks here, more likely those people just have more sense than to spend that on sneakers...

When you've got plenty of disposable income, you really don't give a f**k what things cost or what people who can't afford it think of you buying them

And they're more than a couple of hundred bucks :)

When you've got plenty of disposable income, you really don't give a f**k what things cost or what people who can't afford it think of you buying them

And they're more than a couple of hundred bucks :)

If that was the case you wouldn't have put them on facebook banging on about how exclusove they are ;)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
×
×
  • Create New...