Jump to content
SAU Community

Vic Wasteland Thread


R31Nismoid

Recommended Posts

Oil pressure will be more stable or prone to fluctuation depending on viscosity and how old/new the oil is. What matters is that you have pressure in the first place. ~4 when driving is normal; don't worry too much about it when you are idling.

Link to comment
Share on other sites

That said... I noticed last night on the way home that my Oil Pressure is sitting on 1kg/cm2 after idling for a while at the traffic lights, it comes back up to near 4 when driving, 2-3 when cruising at 2000rpm.

And it was like that again this morning.

Is this too low? I'm not getting any warning lights, will check my level at lunchtime :/

Edit: Pic for reference

hqdefault.jpg

I put a defi oil pressure guage in to be 110% sure.

If it wasn't for the gauge dropping on boost and setting the warning alarm off I wouldn't have known my oil was low in the first place as standard cluster was showing as normal even with a new nismo cluster.. It doesn't move anywhere near as fast as an aftermarket oil pressure gauge (atleast which I have seen).

Link to comment
Share on other sites

Pics of the adjustable arms? About to cut sick on my suspension, but want to keep it looking kinda stock from the rear so don't want anything bright blue etc...

Link to comment
Share on other sites

Pics of the adjustable arms? About to cut sick on my suspension, but want to keep it looking kinda stock from the rear so don't want anything bright blue etc...

just paint em black. lol pm me number mate and ill text you a pic tonight when i get home.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
    • so you can decrease or increase the boost depending on the diet as you wish?     by acting on the wastegate?
    • That's torque and power, it's all from a single run.  The boost curve is "held back" from it's peak target in the 3500rpm to 5000rpm range from memory, so it ramps hard to something like 18psi then climbs more progressively to 23psi nearer 5000rpm.   It makes the torque (and power) ramp more "natural" and less hard on parts and traction, it doesn't feel artificially held back.   
    • Here's the torque curves from the car I ramped boost up later in the rpm to allow a slightly wider useful power curve - the power curve is a bit weird shaped also thanks to the TVIS (or whatever they call it with the 4EFTE in this Starlet) which changes the volume of the intake manifold throughout the rpm range, but you can see that the green power curve actually holds later on with the extra boost... but looks almost more like the kind of thing you'd expect from a cam or exhaust change
×
×
  • Create New...