Jump to content
SAU Community

Recommended Posts

Hello everyone,

just a pondering question, is it possible to make 32r running 4wd all the time without using the current electronic control system. In other word I want to cancel all sensors and ecu and make it run awd permanently without headache .

Is it possible to cancel actuator from gear box and weld nut to press on clutches or keep then in engaged position all the time.

Link to comment
https://www.sau.com.au/forums/topic/380133-how-to-make-32gtr-run-awd-directly/
Share on other sites

The pump unit isn't deisgned for continuous duty, but you mentioned getting rid of all that.

The transfer case clutch pack setup, if locked permanently would either:

suffer from 'wind up', if used on tarmac, as there can be slight differences in driveline rotation front to rear, and that will break stuff.

you will have mad understeer due to the constant locked 4wd mode!!!

The only way to do it properly would be to change the transfer case to a center diff arrangement as used in the subaru's and evo lancers....

Yes you can do it, no it's not a wise move. Not only will you reduce the hp driven to the wheels to give you acceleration, but you will destroy the transfer case from binding the clutchpacks too much

This + the BSM GTR tore the front diff off the sump running 50-50 4wd

they did find they were quicker on the track though (IIRC)

Locking the transfer is no drama, BSM did it with a solid transfer. I also did a similar thing with a machined shaft.

However both cars I know ended up with front diffs sprawled all over the circuit.

The speed gains were negligible. We found the only gain was in top speeds reached on the straights as exit acceleration was slightly faster. Entry and mid corner speed was actually slightly slower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm pretty much healed up post surgery so I spent another almost full day out in the shed re-arranging everything to make room for all of the shit that I've taken off the car.  I need to get everything off the floor and away from the car for when I start making a massive mess stripping off the remaining body deadener and then for the the painting process.  Almost got the shed to a point now where I feel I can actually start working on the car again (clean shed clean mind or something!).  Almost 11 years of accumulated car parts, building supplies, tools, junk, etc have taken a long time to get in some sort of order again!  Most stuff is now boxed up and in the back shed if it's not car related.  Most people would still be horrified walking into my shed but it's significantly better than it was before!   For those that saw my separate post the other day, yeah I ordered one.... This version- I convinced myself to stop being a clown, wake up to yourself and realise it will take you 5 weeks to make one by which stage you're over working on the car again...  Maybe I am getting on top of my "mental ailments" and making smarter choices.... $1450 delivered which will take my miserable half-dutch arse a few days to get over having spent that much!  If I don't have a use for it straight away after my car is off it I might even see if there is a "rental market" for them.  See if anyone wants to hire it for a period of time.  $25 a week or something like that.  I'll worry about that when my car is actually ready to come off it though as that might be a while away!! There's now no excuses now for not ending up with an underside you could eat off! Away for kids sport the next few weekends so hopefully can get the rotisserie assembled ready to go for the car to go straight on it the next available weekend.    
    • I always use my Karcher, but it's only a little one that I picked up from Supercheap  The only issue I ever had with a pressure washer was when I was a kid cleaning coaches, they had a hi-po industrial sized petrol jobbie that would strip paint if you got to close I saying this, we have a fairly high power washer at work with a diesel powered heater that sprays water at about 60°c, it works great for removing old wax and road grime on the underbody after some foam cannon action, albeit from a "stand off" distance of a few feet
    • Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
    • Did the noise appear after your sand trap adventure? Could be something got dislodged and is playing rub rub. Even a rock wedged somewhere.
    • Is there a shroud around the tailshaft spline into the back of the box? They can rub and make a horrible noise if they are not on straight/damaged. The heat might have caused it to grow too much in one direction and rub.
×
×
  • Create New...