Jump to content
SAU Community

Recommended Posts

Hi guys i have some stuff lying around which i dont need so off it goes to a good home.

First up

Bosch MEC717 Coilpacks, brand new in box $60 each plus postage

1313813781635.jpg

Brand HSD strut tops, front pillowball with spacers to suit different valves, and rears are rubber mounts to stop noise entering the cabin. $300 plus postage, this is dirt cheap, price up strut tops elsewhere and you will be lucky to get them cheaper than $600.

DSC_0392.jpg

Fusion 6x9's with a free set of moulded spacers. $50 plus postage

DSC_0271.jpg

Pioneer 6" speakers with free moulded spacers $50 plus postage

DSC_0393.jpg

Soundstream 6" speakers $45 plus postage.

DSC_0391.jpg

SPL Dynamics 1000d monoblock 1000WRMS plus 2 Rainbow Amboss 10" subwoofers. This is my personal stash, subs are handmade in Germany and not chinese junk. These retail for over $500 each per sub. $650 plus postage. Can also make a box to suit the two subs for an extra cost.

DSC_0395.jpg

DSC_0394.jpg

George 0402 237 825

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, good news and bad news Bad news first: The intake plenum is lost in the mail apparently, I haven't paid for it yet, and MX5 Mania are still chasing it up, farking 'Merica postal service  Good news: Any retune will be free if and when it turns up,  I'm still keen for them to throw it on The car goes noticeably better, with only the typical initial take off thingie from a choppy cam and manual transmission, but giving it just a little more RPM than before gives it a smooth take off (and hour or so of peak hour traffic sorted that little skill out) Car made around 145kwatw & 225Nm (Intake may get me to 150kw, maybe....🤣) Weirdly, 145kwatw is the same max power that my standard 2015 WRX STI made a few years ago The cam really comes alive from around 3.5k and keeps making power and holds it flatish all the way to 7k, whereas before torque would drop hard around at 4.5k Drive home was sadly in peak hour, although I did get a little clean air here and there to wind out 1st and 2nd a little bit, and whilst the gains aren't anything for the "boosted boys" to be impressed at, the thing is a blast to drive The sound in the vid is poor, as it is in a undercover yard at work, but, outside, in the wild, it sounds awesomeballs to my ears with all the choppyness I consider it money very well spent for the outcome  Cam specs for reference (Basically the biggest you can fit with stock pistons) 20250417_171807.mp4   LOL, I don't think I will ever grow up  
    • Swap the injectors around and see what happens. If the misfire follows the injectors then that's a signal, if it doesn't it's probably not the injectors.
    • R33 with RB26 seems to go off of learned voltage for idle. Seemed like whatever the baseline voltage was once ECU first gains power will be the idle voltage. With ignition on unplug/replugging the TPS would relearn the idle TPS voltage.
    • Have you confirmed the 2 pin coolant temp sensor on the motor is working properly? I've had a very similar issue when I forgot to plug mine back in many years ago.
    • Ok interesting i guess ill wait till using a manual gauge before making assumptions.
×
×
  • Create New...