Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

I had a blew with this arsehole about 3 years ago.... He told me and my 16 year old daughter (at the time) to f**k off out of his yard!

I asked him he thought that was appropriate language in front of customers let alone my daughters age?

That's a good point too,

Why do car dealers think they can swear in front if customers and still get a sale, fair enough if I swear first, which I don't believe I ever have when making a purchase

But 2 months ago when I was looking at car this car salesman thought he was at a Kevin bloody Wilson concert. dropping a swear every second word acctually put me off,

I don't expect to walk onto dicksmith and when I ask about phone cable have the salesman say " well we have this f**ken cable and that f**ken cable and this ones shit and that ones a kunt to get in"

Or

call up telstra and the operator says "the problem is the reception in your area is f**ken shit"

Or

call the bank and the customer service rep says "the problem is that you've got no f**ken money"

So why do car salesman think they can do it

Edited by stig mick

According to that article ^ ^ ^ Matthew, Creak has resurfaced 20 yrs later after being suspended in 1992.

In 2000 he was running Cars Autohaus Thornleigh when our family dropped in to look at a BMW523i that had been advertised by him as a '98 with multifunction steering wheel.

In fact it was an early '97 with a plain steering wheel and less airbags.

He cracked a fit when I asked nicely about his mistaken advert.

After we'd bought it, Creak would only honour aspects of the warranty that he could readily fix in the workshop - not others.

I also pushed for an Inspection II to be done on the car before takeover - but hey, who knows what went on in the service area. Other than that, the car was pristine. Typical side-tank, fan clutch and other water issues that BMW has tho'

The article in last night's TT was nearly gagged by Creak in the Supreme Court before airing.

I hope tonight's Part II isn't just an epilogue/summary and contains more meat.

I think that Frank whatever-his-name-is needs to be investigated by the ATO besides those caryard cowboys going to gaol as Bob alluded to. :domokun:

i think everyone has had a bad experience with car dealers terry, with what i have experienced in the past, i don't take there word seriously...

but what gets up my nose is what's stopping him from going to another state and doing it over again? (apart from a prison sentence).

he did it once...

off topic, we should get tt to investigate all the imports that are ''disappearing''.

hahahaha I wish

imports are hoon cars so they are not going to try and help the "hoon" community

more speed cameras would fix this.....wait wut? lol

I do agree with what you said before - most of us would have a better idea and you are right - for "non enthusiasts" they should not be taken advantage of because they dont know or wouldnt know to check.

I do agree with what you said before - most of us would have a better idea and you are right - for "non enthusiasts" they should not be taken advantage of because they dont know or wouldnt know to check.

And that's the people they are targeting with this, winding back a porshe is still going to land an non enthusiast who just wants a porshe for the sake of it,

WE all know that import odometers are a complete wank and basically might as well say 1kmfor what they are worth,

But others will go on carsales and make a short list and put huge emphasis on the kms as the most important thing next to the year and features

Edited by stig mick

I've learnt the odometer means nothing at all to do with condition, even if it is accurate. It's all about how the car is looked after.

A car can have done 10 000 KM, or 200 000KM, and both be in the same condition depending on how they've been looked after.

The point is; those dodgy car yards are superficially raising the value and justify the asking price of their cars by winding back the odometers.

In turn, it makes the honest establishments have to fight harder to make their sales. They'd even lose some that they shouldn't have lost.

Kids with honest Dads go hungry ;)

No, not you Rick D ;)

Wish I could wind back the odo on my wife.

perhaps you should trade her in for a new model?

just don't get her from Pennant Hills Ford, SUV Sales Lansvale and TopGear Cars Chatswood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...