Jump to content
SAU Community

Recommended Posts

Hey mate what state are u looking to buy in?

I've been contemplating selling my r33 gtr, 418kw @all 4, fully forged, os giken box, big fuel system. Basically everything is done. Look at photos in my profile if u want, has also run 10.9 quarter

  • 2 weeks later...

What sort of budget??

Imaculatly maintained original R32 GTR N1 ( not a mock up it's a legit N1)

Original everything except oil pump, turbos, injectors, fuel pump and nistune. 340kw

Speak to Aaron at import monster. He is selling his personal 32 gtr its midnight purple.call him for all the mods very very tidy and fast gtr.

90080031

No worries I spoke to him today so he will be expecting your call he is very flexable in terms of price,setup,wheels,breaks,iterior,power,everything including transport if your not in vic so give him a call between 9am and 6pm monday to friday! Its an Incedible car!.

Thanks to Drew for pointing me here :)

------------

I'll give you a brief rundown on the car - will miss a heap of important stuff I'm sure - but here's the main list :)

1993 BNR32 - showing 80 something k on the Nismo dash. Unknown original kms but at this point, it's pretty academic seeing as the car retains almost NIL stock stuff ;)

never bent, never in an accident

Full respray in Midnight Purple from Micolour - absolutely flawless paint - piano flat perfection and *just* had the front tidied up for the SAU NATS - so it is unmarked pretty much now (bare metal - probably $8-10k to redo to this standard)

Carbon fibre hood (Proper c/f - weighs about 4.5kgs)

Ganador mirrors

N1 Skirts

Interior

Full custom trimmed Bride interior with Cuga carbon fibre seats in the front, full retrimmed rears, door trims, upper and lower trims, headlining - all in suede with red stitching ($10k to redo interior to this standard!)

RWD Switch in console

Linelocker in console

Also have full dash retrimmed in Suede, but not installed.

Trio of Greddy guages in dash

Engine/driveline

Engine built by Racepace and probably 3-4000kms old. Starts and runs flawlessly. Cold start/hot start = no problems, runs like a dream whether belting it around the hills or putting around town.

Built for 1000hp+ All the usual secret squirrel headwork mods done for longevity on track, bigger sump etc etc. Was making 540rwkw with a big single. Now running custom built low mounts. Around 320rwkw @19psi and zero lag - like NIL lag - exactly what I asked Benno for, he delivered :). All you need to up the power to whatever level you want to make is turbos and injectors and a retune

Can give you a full rundown on what was done to the engine, but suffice to say it had the full house, best of the best build by one of the best GT-R workshops in the country

And the under bonnet style is super clean, nearly stock looking. You could eat off it :)

Big arsed trust radiator

Big arsed trust intercooler

HKS Twin power DLI

Splitfire coilpacks

Apex'i powerfc (a pro if I remember correctly)

Mine's dumps, HKS Frontpipes, Fujitsubo Titanium catback. Decat pipe.

All tuned at Racepace

OS Giken 5 speed gearbox with HKS Triple Plate clutch

Racepace Hicas lock kit (done properly)

Suspension/brakes

Alcon 6 pistons up front - 365mm and full floating disks

Alcon 4 pistons up the back - 340mm I think. Bigger than most fronts

Tein RE given the full custom Racepace rework. Incredibly easy to drive on - maybe 1000kms of use on these

Nismo Circuit link setup

Am flexible on the wheels, I have many. Right now she has Rays Gramlights 57F Pro in 18 x 10 +13 and brand new Kumho KU36 rubber

Here's a pic taken a couple of weekends ago at the SAU Nats, feel free to drop me an email/pm/phone call if you want to check her out. :)

Cheers

Aaron

post-58515-0-53261500-1320707274_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is possibly 55 degrees for the Nismo version. I had a look through the manual and the stocker has a breakaway torque of 2.5 to 3.5kgm. Supposedly the Nismo LSD goes down to 5kgm when worn in but it is pretty grabby even with very little throttle. Worse when cold. So I guess you have three things. 1. Shims. 2 Friction plates 3. Cams Would think shims would be the easiest but Ive no clue how many tenths of a mm shim thickness change equals how many kgm torque. Also not sure if the Nismo friction plates are similar/different to stock or if they are the most of the source of the diff being angry. Think I can write off the Nismo rebuild kit for the standard diff as not being what I want.  
    • Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
    • Factory LSD is supposedly a 2 way with a very conservative cam. If you've already tried adding friction modifier to the diff oil and it still locks up too much for your liking you might want to adjust the ramp rate on the cam to be more like OEM instead of reducing initial torque even further. People claim the 8 kgf-m disc kit for the OEM LSD is still very streetable but I've never been able to compare everything side by side on my own.
    • Oh man, at least it sounds they've accepted they stuffed up and not put it back on you...could see some confusion if they asked if it had a hardtop or not, and you've answered truthfully but maybe not answering their real question which is what roof did it have from the factory! Glad your keeping it N/A 2.5
    • Nah, I much prefer colour matched Talking about colour matching stuff, the new/used boot lid turned up, all painted up perfectly......aaaannnndddd, it's for a power retractable hard top, not a soft top.....LOL They are now sending a boot to fit a soft top.....,  whilst frustrating, life is like that sometimes, sometimes you just need to dodge, duck, dip, dive and, ummm, dodge.
×
×
  • Create New...