Jump to content
SAU Community

Need A 'good' Mechanic *rb25/30*

_5C077Y_

By _5C077Y_,
in Tasmania

 Share

Recommended Posts

_5C077Y_ Enthusiast

_5C077Y_

Posted
Posted

Hi guys, I am wanting to build an RB25/30 for my project car, have it all planned out, am getting the parts together and I know what needs doing.

Just wondering if anyone knows of a mechanic anywhere in Tassie who knows how to and can build one bottom to top and actually put 'TLC' into their work, do a good job and be fussy about it instead of just slapping it all together??

Link to comment
https://www.sau.com.au/forums/topic/380855-need-a-good-mechanic-rb2530/
Share on other sites
zoidbergmerc Mentor

zoidbergmerc

Posted
Posted

GT Garage built my car, from top to bottom, inside and out. Can't big them up enough, I love my car so much and it's all thanks to them, (and a few other special friends ;) )

If you're in the north of the state, you should check out Boost Automotive in Launceston. I think Brad @ boost actually defines fussy. Just one look at his R32 says it all.

_5C077Y_ Enthusiast

_5C077Y_

Posted
  • Author
Posted

Their down in Hobart yea? I live in Launnie but willing to travel or even send it to Melbourne. Have always been told not to go near Boost, but Brother actually called me 10 mins ago telling me to go see Brad because he built a 'fussy' rb2630 for a mate... So guess I'll look into it =) Cheers

jangles Veteran

jangles

Posted
Posted (edited)

I know Anthony shaw built a monster rb26/30 from shaw performance... Just the base tune (touched up rb26 map) was shredding toyo r1r tyres on the dyno, and beat a 330awkw gtr at powercruise... Motor is for sale aswell

probably to do with the power delivery/whack of torque vs how well its tied down and not so much peak power/quality of build when shredding tyres on dynos

(this is not meant to detract from it being a tough motor, just saying)

Edited by jangles
jangles Veteran

jangles

Posted
Posted

Didn't know there were so many factors haha.. But I know he was building it to make some stupid amount of power safely, something like 400-450rwkw.. Then rolled the car and has to re shell it :(

not so much lots of factors, just think all the 1000hp plus gtrs and cars on dynos that try to lunge off before spinning wheels.

WHITER33GTS-T Veteran

WHITER33GTS-T

Posted
Posted (edited)

I had brand new tyres and they turned to shit after a few power runs and started smoking on the rollers. Even with 2 guys in the boot and 2 in the back seat. Less tread next time for me :thumbsup:

My highest reading was 475

Edited by WHITER33GTS-T
shiftlock_anthony Enthusiast

shiftlock_anthony

Posted
Posted

I think you will find that a lot of the big name guys will be super fussy with a build like this, their work is their reputation!

But if you wanna save yourself some cash and time, take tweetywoof's advice and buy my motor :P

Asking 10g for the complete package ready to go, owes me approx 14g

has only done all of approx 500ks. i kinda ran outta talent and binned it :S

i have reshelled it, but looking to put SR20 in it and put money into buying another gravel rally car!

Spread the word guys!

Rb26 head & intake, Kelford 272 cams

RB30 bottom end, forged pistons, shotpeened rods, nitrated crank, ACL race series bearings, ARP stud kit (top and bottom)

Stainless steel exhaust manifold with 50mm external waste gate and screamer

Garrett 35/82 Turbo

SuperSpark Coils

Haltech Pro Plugin computer

RB25 gearbox & Tailshaft

comes with all oil fittings and drain lines etc (braided & Heat wrapped)

and a heap of other bits i cant think of at the moment, but its a good thing!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      Short shifter r34

      By drifter17a · Posted

      Way more than 1cm. Appreciate the advice maybe I try changing the bushing first
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      IMG_8641.mov     She doesn’t sound the best but starts with out using any gas now. I just ran some injector cleaner through her. started roughly the first time after adding it but gave it the beans slowly upto 4k, Must have cleaned a few cobwebs out. another step in the right direction for the sub
    • Kinkstaah
      R34 Diff oil

      By Kinkstaah · Posted

      Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it. Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical. Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in
    • GTSBoy
      Short shifter r34

      By GTSBoy · Posted

      Let's just fix the problem by f**king the rest of the gearbox.
    • GTSBoy
      R34 Diff oil

      By GTSBoy · Posted

      Unlikely, as per Greg's post. This is not helical diff behaviour unless one wheel is up off the ground. Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion. In case it isn't clear, I consider the process to be stupid. Nike.
×
×
  • Create New...