Jump to content
SAU Community

Recommended Posts

Hi folks,

I've got a few items up for sale. I'm located Sydney, Inner West. My contact number is 0412 509 637. PM me or give me a call. Cheers!

1. R32 GTR rims with Yokohama A048R semi slicks

- 5x114.3 pcd, 16*8+30. Great fit on S13, R32 Gts-t. Obviously fits other skylines also.

- 3 rims are in very good condition (keeping in mind they're 20 years old). One has gutter rash - see pics below.

- all rims have centre caps

- Tyres are Yokohama A048R semi slicks. MH compound. They're 225/50/R16's. They've seen 4 track days, still tons of tread left.

$600

DSC_0007-1.jpg

DSC_0005-1.jpg

DSC_0004-1.jpg

DSC_0003-1.jpg

DSC_0002-1.jpg

2. Sabelt 4pt harness in good nick. Has everything you need to bolt straight in.

$100

DSC_0008-1.jpg

3. No name wing with bootlid reinforcement underneath (see pics).

- Creates less lift, looks like you're going fast. Seriously though, it did improve stability through faster corners imo. Take the wing and bootlid for $100

DSC_0017.jpg

DSC_0019.jpg

DSC_0016-1.jpg

DSC_0010-1.jpg

4. Momo corse bucket seat.

- One piece fibreglass

- FIA approved

- Mounts for S13

- Has lumbar and thigh cushions

- Great seat, just has tears in the material. If you're doing skids or trackdays, a great upgrade over the standard seat, and very safe.

$200 or, buy the harness too and i'll give you both for $250

Photo0026.jpg

Photo0028.jpg

Photo0028.jpg

GTR rims sold.

I also have a bunch of S13 spares if people need them - rear glass, quarter glass, standard rear upper and toe arms, driver's side door, steering column (off the top of my head). If you're interested in any of that stuff, let me know and we can work something out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One other thing worth mentioning when I did this job I only jacked up the driver side as I was only doing work there, but from what I understand both wheels should be in the air when removing the sway bar links?
    • Yep it's an r34. Usually people remove struts without removing the front upper control arm (fuca is what i assume this is?) So not sure why mine wouldn't fit. I know on my other car I did a similar job and it wouldn't fit until I removes the ball joint nut even though I didn't remove it prior.   The upper arm doesn't seem to be in the way (the part that's bolted to the chassis. The part that's bolted onto the j arm I'll check that out though.   I was going to compress the spring and put it in with the compressor attached but not sure if it will work  Haven't seen anyone do it.
    • I have a small lip on the boot of the E90 and I've been toying with the idea of trying to mould it in to the boot to remove the gaps. I guess shaving the seams? No idea what the terminology is here.  What I'm wondering is, if it's current double sided taped down, what would I do to more permanently attach it so it makes a good base for the filler? It only has edges so no way to bolt it down unless I add some braces. I've done a lot of fibre glassing in my time so that's nice and easy but I'm not sure what my options are here.  Sorry, this is the best pic I have and I'm 4 million ks from home ATM.  
    • Based on this comment I went googling. A052's in the sizes I want are certainly not cheap, but I couldn't find anything in the V70A anywhere. How much do they run/where do they get sourced from? From what I know (nothing but internet searches and reviews etc) the R888 has pretty much fallen off from anyone's actual use, and the AO52 is the king of "road legal" rubber. Nobody is driving around on their daily for Z221, AO050, DZ03G. At that point, for purely track only tyres - Why not buy actual slicks? Why does nobody actually do that anyway?
    • This an R34? It shouldn't matter though - it should be the same as on any of the others, and by "any of the others" I mean R32, because that is the car that I have had the front end apart on about 50 times this year. Sometimes, it is much easier to get the lower shock eye onto that pin when: a) you have the upper shock nuts backed off a few turns so you can wiggle it a bit more freely. When they are tight the bottom of the strut is much harder to move that _leeeetle_ bit you might need it to to win the fight. b) you have the outer bolt(s) from the FUCA out and so you can move the lower pin around freely too. Then, all you have to do is put the upper arm back on when you've got the rest back together, and this is where jacking under the balljoint can help.
×
×
  • Create New...