Jump to content
SAU Community

Recommended Posts

Well the NSW State Champs are on at Eastern Creek this weekend - but the twist is that it is the first race meet on the new, "north" circuit.

$9M of taxpayer funding later, the ARDC can now hire out the track in 2 halves. This weekend's state champs are on the short track but the same price as when the full track used to be used.

The quickest cars are doing the lap in about 1min which is around 2/3 the length of the old track, it has also removed turns 4,5,6,7,8 and changed 9 to a kink.

Results are here: http://www.natsoft.com.au/cgi-bin/results.cgi?23/10/2011.ECNT

:down: from me.....did anyne race there today, and what did they think?

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Gaytube, dunno how to embed videos.

I don't agree with the entry cost being the same for half the track although standing at the new turn 4 for 4hrs today it is quite an exciting little section that turns the whole north circuit layout into more of a horsepower track than EC already was. Very bumpy on the entry to turn 4, take too much curb and it will bounce the car around and make it difficult to get the right line into turn 5 which then effects top end speed at (the new) turn 6 kink.

anyone found onboard video of a lap?

I was hoping there would be some by now, or feedback from someone who has run the new track

.....it is quite an exciting little section that turns the whole north circuit layout into more of a horsepower track than EC already was. Very bumpy on the entry to turn 4, take too much curb and it will bounce the car around and make it difficult to get the right line into turn 5 which then effects top end speed at (the new) turn 6 kink.

That's exactly how I see it without having tried it yet. It increases the worst thing about the track (dragstrip/power track) while removing some of the challenging corners. In a soft car like mine I guess the new turn 4/5/6 complex will be easy to cut, we approach turn 4 in high 3rd or low 4th gear so we aren't as fast or as stiffly sprung as the radicals in the video. I bet the IPRA guys were cutting like crazy.

The track hasn't been ruined, its just gives another layout option (just like Oran Park had).

Well, to me, Oran Park South was one of the few track that was not really worth running on. I turned down plenty of chance to run there, the OP GP circuit was a totally different matter, its the best track I've run on.

And it at least had the challenges of suttons and the flip flop, EC North has nothing like that (turn 1 is ho-hum once you work out how fast to take it, 2 is just slow, 10/11/12 is the only fun remaining)

could be worse - look at QR... their most common short track leaves just 3 proper corners. Mind you, they only have 6 to start with. The short track sections are nonsence flip-floppy things through spoon drains.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep, the plan is to do some work in Japan, as I mentioned above possibly keeping it there longer than November 2025. Frankly, I'm not dealing with TopRank ever again and, because my car is no longer with them, I could work with BBL/GY directly👍 But alas, I'm not looking at major bodywork just yet.
    • Yeah I had the probes on the battery terminals.  Sounds good. What reading should I expect to see in a car that runs well? 
    • I went for the scissor lift option, gives a 3ft lift at full lift. I wanted a 2 post but my concrete wasn't deep enough to secure it properly
    • Depending on exactly where that voltage is being measured, that is most likely the battery is f**ked. If the multimeter probes are on the battery's own terminals, then it is f**ked. If they are on the car's terminals, then there is a bad connection. Either are fatal to the attempt to start it. Literally just put it on the 20VDC range, put one probe on the battery's -ve terminal (ideally not the car's terminal) and the other on the block somewhere exposed/metal, like an engine mount bolt head. You can also test the earth lead is steps, so from battery to body earth, body earth to engine connection point, engine connection point to some other spot on the engine, to see if you can isolate where a shit connection actually is.
    • I meant to write 50 originally and then double checked the price and found it was ¥12m (125k) and came to edit it and realized I had accidentally added and extra 0 in the first place lol 
×
×
  • Create New...