Jump to content
SAU Community

Abs Unit Dying? Buzzing Noise + 4Wd/abs Not Engaged

WYTSKY
 Share

Recommended Posts

WYTSKY Veteran

WYTSKY

Posted
Posted

Hey guys,

driving home a couple of hours ago, stopped at the lights, my 4wd and ABS lights come on and steering felt abit funny ( prob because of awd not running).

got it home and took this vid ->

first 3 seconds is fuel pump priming, but after that there is this funky noise coming from the abs module, I ran over there to check and could feel the vibrations in it.

I have never ever seen anything leaking from the unit in the 5 years I have owned the car.

I have multiple questions:

1. does the unit just need to be bled/ simple fix?

2. if I need to replace it, is it an easy job? any complications?

3. can I use a 33 s2 unit in a s1?

4. what fluid does it take and how much?

5. Is it safe to drive the car in this state? Ie if I cannot fix this by monday I need to drive to work...

Thanks heaps guys.

Adam

WYTSKY Veteran

WYTSKY

Posted
  • Author
Posted

from the research I have done, I believe I have answered some of my own questions for other people's reference:

1. Unit cannot be bled, the normal brake system is what gets bled

2. not sure yet

3. I don't think a s2 will work in a s1 as a s2 has 2 lines that go to the top of the unit and a s1 has 2 bolts on the top instead, those extra 2 lines are attached to the side of s1.

4. fluid comes from brake master cylinder, normal dot3/4 castrol super etc...

5. I noticed especially in reverse that the brakes felt like they were stuck on, I took out the 2 relays in the black box and I still have the abs and 4wd lights on as I don't have abs now, but atleast I can drive to work tomorrow and use the car until I locate a replacement.

I will do a full brake bled and put in new fluid to hopefully see if it fixes it, but I think the unit has probably had it.

anything else I should know?

luke gtr Grand Master

luke gtr

Posted
Posted

Try and get a workshop manual.

It will have proper bleeding instructions.

The r32 units can be bled, but by the sounds of it, I think the unit has seen better days.

Good luck with it all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By MBS206 · Posted

      Well, in 2007 he must have been charging about $1800 an hour. He only looked at the car for 5 minutes. And another 4 to write the report wrong, and another minute to correct it. Mind you, this was for a car that was: Stock engine, fmic (hole in drivers guard), all alloy intake and custom air box, 3 inch turbo back exhaust, lowered, and a set of 17" Advans (255/40/17 rear and 235/45/17 front). It was nothing crazy. The blue slipper wanted the "hole in the guard" engineered. But that was because he got the shits that I wouldn't "relocate the battery from the boot, back to the factory position in the engine bay"... In an R33 GTST...     Also for emissions, E85, and don't go wild on timing. It's amazing how the closer you get ignition timing towards max torque, the last couple of degrees really throw NOx counts right up. And for the huge increase in emissions, it's only a small increase in torque.
    • MBS206
      Neil's R33 Gts-t Build

      By MBS206 · Posted

      He'll be looking down and swearing about "the damn apprentice" for trying to convince Duncan to use percussive maintenance... 😛  
    • GTSBoy
      WTB noltec r32 front upper (camber) arms

      By GTSBoy · Posted

      I swear at my GKTech ones every time I have to take them apart and replace a spherical. But I wouldn't swap them for anything else. They absolutely slay every other option, at least in terms of how they actually work. You sure you don't want to live with bearings? I mean, they don't have "ball bearings". They are rod ends and sphericals throughout. Tough as nuts, even though I have found more than one way to wear them out.
    • The Bogan
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By The Bogan · Posted

      From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • GTSBoy
      🚨 Need Advice! Overcharged for Engineering Report 🚨

      By GTSBoy · Posted

      Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
×
×
  • Create New...