Jump to content
SAU Community

Recommended Posts

which r33?

a non turbo is pretty good i guess on maintence and fuel....

a turbo can chew petrol if you get it on boost alot and can cost a bit more to maintain

a modified turbo can put a deep hole in your wallet for fuel and maint

also depends on how you look after it as with any car

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-768987
Share on other sites

which r33?

a non turbo is pretty good i guess on maintence and fuel....

a turbo can chew petrol if you get it on boost alot and can cost a bit more to maintain

a modified turbo can put a deep hole in your wallet for fuel and maint

also depends on how you look after it as with any car

Nice car ferni. Yeah a pretty stock turbo r33. Yeah the whole maintenece cost thing is turning me away from this car.....

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-769009
Share on other sites

My R33 GTS-t gets around 450-500 km off 50L (that's all i can get in the sucker, unless the fuel light comes on with 15L to spare :D) So that aint too bad, depends how u drive it and where. This is coming from 750km off 55L so there is a substantial difference, but the fun is worth the extra :)

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-769573
Share on other sites

My approx running costs are:

Fuel = $50/wk

Oil = $3.5/wk

Oil Filter = $0.50/wk

Fuel Filter = $0.50/wk

= $54.50/wk

Many people say that Skylines have high running costs, the only big difference I see is the weekly fuel costs (98 octane vs 96 octane = $5/wk) and also they are more thirsty compared to an average car (such as VS Commodore or a Honda Accord).

The single biggest cost is the 'mod bug' (that is when you can't stop yourself modding the car). You can easily waste $1000/mth for 12mths and still not even be half done. If I did it all over again I'd just buy it... drive it to the ground and then upgrade to an R34 GT-T or an R33 GTR and 'then' waste some mulla on it :D

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-769679
Share on other sites

Thanks for all the feed back guys. How about spare parts are they expensive? I use to drive a Honda and parts were not that cheap. Servicing was around $250 for normal and for major around $800+.

I've got a motorcycle predator so I use that for fun but I also want a car that can be used for fun and a daily driver.

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-769771
Share on other sites

I'll post up the Driver magazine (japan) figures later, if I remember. IIRC, the r33 GTS-T managed to get worse fuel figures than the GTR!

My r33 (rb20e) daily 'beater' is pretty horrid on fuel (for what it is) - I've always thought of it as too little power pushing too big a car though

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-769807
Share on other sites

yar, fuel costs are probably a bit high (i find i return teh same milage regardless of how i drive, only getting better milage if i throw a highway run in there)

probaby about 350ks a tank

i get my car serviced regularly which costs 100 bux every 5000ks or so (yay for nissan servicing)

apart from that, my liner hasnt cost me anything in breakdowns or new parts (a new clutch ages ago, was only 450)

oh , insurance and rego and what not, but i dont even notice those costs;

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-769818
Share on other sites

hondas are more expenisinve imo, especially if you take it to a honda dealership to get serviced.. the good thing about skylines is the community - everyone is willing to help out - alot of the people with them on here know the basics about cars and can service their own, and know what it should / shouldn't cost

servicing won't be as expensive as your honda

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-770227
Share on other sites

nmcmahon83 - are you driving it like a camery or what? :/

Haha, well simply yes. I have 1 point on my license until mid-May... do you blame me :) Although accidently got a little sideways leaving uni today, whoops :Oops: But alot of my driving is highway aswell, im upto 500km this tank and counting (got about an 8th left)

Link to comment
https://www.sau.com.au/forums/topic/38097-running-cost/#findComment-770441
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If your current chain of thought is, I'll go somewhere like pick and payless (or equivalent) and causally remove the bit of roof with your BYO grinder then casually weld that into your car... oof. It might sound easy but you will 100% end up with a warped roof. You say you'd prefer some ugly fab work, but I don't know if your prepared for how ugly this will be lol.  I've seen professional welders do similar but easier repairs and still end up with warped panels.  It is reasonable to assume that from your current skill level, you won't be able to do this cut and paste job while keeping flat panels.  Ok, but we are here to learn. This might be the go... jump on car sales, sort by price, buy the cheapest thing with rego and drive it home. This is your new practice vehicle. If you're thinking of doing the cut and paste job, try it on this car. Cut out the panel (hey it's a perfect fit) weld in the panel. See what you think of the results.  Next thing you could try, practice removing the entire roof in one piece by drilling out all the spot welds etc. Have a crack and welding the roof back on.   
    • I've never welded but I own a welder and I've always wanted to learn. In fact I had already looked at a 1 day welding course in Sydney.  I'd prefer some ugly metal fab than anything weak.  I'm challenging myself a lot with this car. For so many years I've just paid other people to do things and I've always been keen to learn and get better.
    • Ok, thats a good starting point.  So before we start.... do you mind if the car say isn't a strong as it was before? My first thought is go excavating for rust. You'll be left with a gaping hole, that will be filled with fiberglass. You could make it look factory pretty easily but yeah, if you never crash it will never be an issue right? Before we look at other options, how confident are you welding? 
    • Oh this is my 1998 E39 5 series. It's worth more to me than financial value. It's a project car for me to love and work on without fear of f**king up something that has lots of value or that I need to keep running.
    • I'm super realistic here. I love the car and want to keep it but I know it's days of perfect condition are well and truly over. I just want a fix that won't come back. 
×
×
  • Create New...