Jump to content
SAU Community

Recommended Posts

TEIN suspension for R32 GT-R, great condition, spring seat height adjustable only.

No leaks that I can see, ran great on the car but it's a tad too stiff for daily duties in Sydney (i.e. shithouse roads, I'm too soft).

Turns like a machine.

$700 firm pick up only (no rush to sell these as they are in great condition).

3" cat back exhaust off my GT-R, could possibly fit non GT-R R32s. Has small small 'hotdog' resonator and what looks like an "APC" rear muffler.

Gives your car a great note, selling as I put a quieter system on (I'm getting too old). Has some scratches, it's a 2nd hand exhaust.

$350 pick up only.

Location: Liverpool area, NSW.

Contact: PM is your best bet

I'll get some dodgy pictures later on in the week, busy this weekend.

PM me for my number

$600 for TEINS (I'm getting attached to my current suspension)

$250 for exhaust, it's taking up garage space urrgghh

Also have my R32 GTS-t wreck. No engine/gearbox/front brakes. Diff should be good, power steering was good. Ideal for someone who can drag it onto a trailer/truck. $400 located in St Marys.

2n83346.jpg

vxzrf5.jpg

2h6snk0.jpg

b8p74o.jpg

2wpqrsj.jpg

Lowball away

I also have another set of struts, front Koni dampers rear standard dampers, Eibach springs all round. I thought the Konis were stuffed but it was the upper control arm knocking.

$200

RB20DET silvertop with R34 turbo, loom, ECU $1,500 I think it has around 130,000 km (can't remember the reading on the cluster).

R32 side mount intercooler $40 nothing wrong with it.

Wreck went to waste (was scrapped).

Everything else still for sale.

TEIN suspension - $600

3" cat-back exhaust - $200

Koni front/standard rear dampers with Eibach springs - $200

Standard GT-R cluster - $40

Standard GTS-t cluster - $30

Standard GT-R steering wheel - $20

Nardi steering wheel - $40 (I paid $100 lol)

RB20DET (silvertop) with R34 turbo, computer/loom - $1,500

R32 GTS-t front brakes (4 pots) calipers/pads/rotors - $200

Standard R32 GTS-t side-mount intercooler - $30

No nibbles :(

TEIN suspension - $600

3" cat-back exhaust - $200

Koni front/standard rear dampers with Eibach springs - $200

Standard GT-R cluster - $40

Standard GTS-t cluster - $30

Nardi steering wheel - $30 (I paid $100 lol)

RB20DET (silvertop) with R34 turbo, computer/loom - $1,500

R32 GTS-t front brakes (4 pots) calipers/pads/rotors - $200 or swap for R33 N/A front brakes

Standard R32 GTS-t side-mount intercooler - $20

  • 2 months later...
  • 2 weeks later...

Bump

TEIN suspension - $600

3" cat-back exhaust - $200

Koni front/standard rear dampers with Eibach springs - $200

Standard GT-R cluster - $30

Standard GTS-t cluster - $30

Nardi steering wheel - $30

RB20DET (silvertop) computer/loom *no turbo* - $700

R32 GTS-t front brakes (4 pots) calipers/pads/rotors - $200

Standard R32 GTS-t side-mount intercooler - $20

  • 7 months later...

Yeah mate, still lying around in the shed.

Note RB20DET is gone.

Looking to swap the TEINs back into my car, so Ohlins suspension might be available soon (very good for street).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jamie does know his stuff , you might just want to give them a call and ask - here is their FB page  -  https://www.facebook.com/profile.php/?id=100063506985512 - you will find the number to call them on.
    • Do you think the guys in Penrith are install the E85 Kit?
    • Thanks Pac!   I will reach out to them!
    • Yes, but 2 things of the top of my head, 1. Legalities of nitrous on a street car. 2. No chop chop. I fully understand that there's much cheaper ways to make power, and whilst a wet 50 shot is fairly cheap to install, bottle fills are expensive, and bottles always need to be refilled, and nitrous also has its own inherent issues with reliability, and tuning, from my experience of others using nitrous, it doesn't take alot to lunch a engine real quick if something goes slightly wrong when spraying, if I wanted a big chunk of additional powers, a spooly boy would make alot more sense, disregarding the additional engineering, supporting mods and other logistical issues of sticking a spooly boy on a car that came naturally aspirated from factory  In the end I'm not racing for sheep stations, and I don't really care if people make more power, or are faster than me, or spend less, or more than me, the only thing the car needs to do is drive around and make me smile, which it is doing now Really, I just want a shiny new intake to look at when I'm cleaning the engine bay, and of course, some more induction doorts, and maybe even that 5kw for that elusive 200hp cherry on top that I might get If the FAB9 intake plenum, TB and air filter box thing doesn't eventuate for whatever reason, Plasmaman do one, not as fancy looking, and a fair chunk of more cash is required when including the TB and other bits and pieces that are required to install it, but, it is another option that is available to me if FAB9 one does fall down (but I really, really.....really, want the FAB9 one though) TL;DR. You want what you want
×
×
  • Create New...