Jump to content
SAU Community

Recommended Posts

As a few of us are going up Friday to catch the track day nice n early the next morning, I thought I'd organise a cruise up there for everyone after work

This is not an official SAU-Vic event, just a cruise up as a group.

When: 28th October 2011

Time: Meet 5.30-6pm, departing at 6-6.30pm

Itd take approx 1.5hrs to drive up

Where: Hungry Jacks, Roxburgh Park

Cnr Somerton Rd & Reservoir Drv Roxburgh Park 3064

Link to comment
https://www.sau.com.au/forums/topic/381186-skyline-cruise-to-sau-nationals/
Share on other sites

Hey mate, just letting you know, most of SAU VIC will be going to these premeets:

When: Friday 28th October

South East Premeet:

Where: AMF/AUTOBARN /NANDOS on PRINCES HWY in Clayton.

Time: Meet at 11:30, depart at 12 to arrive in time to Meet point 1

We will take the toll free way through princes hwy to the western freeway.

Meet point 1:

Where: Western Ring Rd Maccas/Mobil (near Boundary Rd exit)

Time: 1pm if you want to have a chat beforehand, get fuel, snacks etc. LEAVING at 2pm.

Meet point 2:

Where: BP Wallan on Hume Fwy outbound

Time: meet at 2.30, as we will most likely be driving through between 3-3.30pm.

Will swing past and grab everyone on the way, so if Wallan is less out of the way for all North/Eastsiders, just meet us there...

One thing is, since its a long weekend, most people leave melbourne at 4-5pm for a holiday, thus a lot of traffic, it wouldn't be a 1.5 hour drive with the traffic. I recommend leaving earlier. Just a suggestion :]

Not stopping you from doing this meet. :]

Thread for meets: http://www.skylinesaustralia.com/forums/topic/380132-friday-cruise-to-import-monster-sau-nationals/

Edited by PENGUYEN
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
    • I say it often, none of this stuff is really Skyline-specific per se. But in general there's not a lot of people who actually know what they're doing. A lot of people charging like they do. Agile software development probably isn't the greatest idea for an engine controller.
×
×
  • Create New...