Jump to content
SAU Community

Fs: S1 R33 Reapairable Write-Off (Repaired)

acdc-5

By acdc-5,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

acdc-5 Enthusiast

acdc-5

Posted
Posted (edited)

Hi all, Im selling a S1 R33 i bought a few years ago as a repairable write-off. All the major repairs have been done. But it still needs minor things to finish it off..

Horn doesnt work

Plastic inner gaurds need to be put back in(come with car)

Needs 4x Tryes

AC Condensor fan is missing

Theres a few other small things i cant think of off the top of my head.

Repairs were done by a qualified panel beater. Its had the Radiator support and the panel that the radiator overflow and fuse box mount to replaced. Also the bonnet and drivers side gaurd. All panels replaced were new and genuine nissan except for the bonnet which was an aftermarket item. I have all the photos and receipts needed to get the VIV sorted. I just dont have the time or money to finish it off.

Car has one of the Ebay alloy radiators, Blitz turnflow intercooler kit, kakimoto cat-back exhaust, JJR sway bar and lower brace. Had all the belts and T/belt changed.131xxxkms on the clock.

The car is located in Seaford,vic. More then welcome to come and have a look.

Im after $4k

Will get some pics up shortly

Thanks, Kev.

Edited by acdc-5
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...