Jump to content
SAU Community

Vdc 2001 V35 Sedan

Kolossus
 Share

Recommended Posts

Kolossus Proficient

Kolossus

Posted
Posted

Hey guys I have tried searching the internet for an answer to this but have been incapable of finding an answer so here goes, does the 2001 V35 sedan have a vdc button/switch or does it not as i have not seen one in mine (i haven't been trying to hard to find it as to save my 20 inch tyres from certain doom) my sedan is a 300GT as opposed to a 350GT would this be the reason for one not being there??

Link to comment
https://www.sau.com.au/forums/topic/381252-vdc-2001-v35-sedan/
Share on other sites
MSKYO Enthusiast

MSKYO

Posted
Posted

From my recollection the 300GT (and 250GT) did not come with VDC. Only the 350GT-8 and possibly the 350GT 6spd. The 300GT may have traction control only?

Even the Series 2 V35 sedans only featured VDC in the 350GT-8 while the standard auto only had traction control. Little bit strange I thought, along with the decision to make only front airbags standard in the sedans when curtain and sides are standard fare in the coupes. Even the V36 sedans only have front airbags standard which to me is a big turn off for a car costing decent dough

Kolossus Proficient

Kolossus

Posted
  • Author
Posted

Ah ok, but let me guess... no traction control switch/button is there?? ( also i was just under the impression that VDC was nissans way of saying traction control at the time obviously i was mistaken haha)

Makkks Newbie

Makkks

Posted
Posted (edited)

Hey guys..

I hav a got a 2001 300GT recently...n i was wondering if it has VDC or not....

also if traction control helps during rain n all...coz recently my car slipped during rain...

If not then can VDC be fitted in my car? to make it more stable?...

there is a switch which says PWR/ /SNOW ...is it of any help?

thanks

Makkks

Edited by Makkks
MSKYO Enthusiast

MSKYO

Posted
Posted

^I've never heard of VDC being retrofitted. I imagine it would be incredibly complex and expensive if possible. You're talking about sensors on each wheel of the car, ECU programming etc. Probably cheaper to buy a car that has it already...

The snow button is literally for driving in the snow. I believe turning it on changes the engine mapping and power delivery to suit such conditions, although I have read it is certainly not recommendable to turn it on in normal circumstances. Call me boring but I've never had the urge to flick the snow switch in my coupe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sean'O
      3D printing fun

      By Sean'O · Posted

      Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • GabsReDeal
      R32 GTS (RB20DE) clogged cat

      By GabsReDeal · Posted

      Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
    • Milkmun
      NC MX5

      By Milkmun · Posted

      Hope the cans went down well at least 
    • Milkmun
      Neil's R33 Gts-t Build

      By Milkmun · Posted

      255 can't go wrong with the price.
    • Kinkstaah
      Neil's R33 Gts-t Build

      By Kinkstaah · Posted

      When I was replacing my pump due to being stranded in the wrong state, I went with the Deatschwerks 320lph kit. It is a direct plug in to the stock wires, harness, everything. It comes with a plug... but you can plug the OEM plug directly into this thing. https://justjap.com/products/deatschwerks-dw300-fuel-pump-nissan-s13-silvia-r32-r33-r34-skyline-c34-stagea?currency=AUD Downside: Won't actually flow that much on boost if you want to push it on E85, but it's comparable to the 040/255 etc. Little more actually.
×
×
  • Create New...