Jump to content
SAU Community

Recommended Posts

drag radials!!!! and suspension

are you taking raised suspension to fit drag radials under the car, or lowered suspension? stock suspension is better for drag racing than a set of coil overs.

WTF are you smoking?

Your reaction time is the time it takes from when the green light lights up, and when you break the first beam.

Your reaction time, is all about how QUICKLY you react to the green coming on. If you had come to the SAU NSW drag day we held not long back, Sydney Dragway officials even explained this.

What can quite majorly effect your ET is your 60 Foot time. This is the time it takes for you to travel the first 60 feet of the track. 0.1 of a saving here can be 0.2 of a saving at the top end of the track.

For your ET, your reaction time means NOTHING.

baaaaaaaaaaaaaaaaaaaaaaaaaaahahahahahahaha, you might want to read some of the earlier posts in the thread next time to stop yourself looking silly.

are you taking raised suspension to fit drag radials under the car, or lowered suspension? stock suspension is better for drag racing than a set of coil overs.

baaaaaaaaaaaaaaaaaaaaaaaaaaahahahahahahaha, you might want to read some of the earlier posts in the thread next time to stop yourself looking silly.

Edit:

NVM... I thought he quoted Zebra and was arguing...

are you taking raised suspension to fit drag radials under the car, or lowered suspension? stock suspension is better for drag racing than a set of coil overs.

silly.

No raised suspension..ye NEW standard stuff is better than circuit coil overs...but anyone semi serious about it doesnt have standard springs and shocks in the back

Previous launch was a 4100RPM drop, this time i'm thinking release the clutch before the friction point while giving gas just before the car starts to move(hand brake or something to stop it from going forward) then slipping (or trying to :P) the clutch out? I'm all for suggestions guys.

if you weren't loading the car up on the handbrake last time then definitely do it next time. doesn't do the clutch much good but it will give you the best launch. test it out tomorrow on the road and you will notice the difference.

if you weren't loading the car up on the handbrake last time then definitely do it next time. doesn't do the clutch much good but it will give you the best launch. test it out tomorrow on the road and you will notice the difference.

Tried it today, soon as the clutch is fully released it still chirps a few times but not as bad as before. Took off a fair whack faster though, kinda like stalling an Auto up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sharing results from recent Liberty Walk R35 GTR, since they are still considered as somesort of a V36 Skyline. We do them turbos too. This are high flowed SS-1 models with ball bearing conversion done.  Car have managed to pull 485awkws @ 20Psi so far pushing limitations of factory built engine. The build list for R35 GTR enthusiasts as follow : HyperGear high flowed stock turbos in SS1 (G25-660 specs) Custom titanium intake pipes. Vspec performance titanium front pipes. Vspec performance 4" titanium exhaust. Upgrade fuel pumps. 1200cc injectors. Ignition coilpacks Hks intake plenum. Hks intercooler piping. Greddy intercooler. Greddy bovs. Top-secret coolant reservoir. Emtron ecu. Straight E85. Built gear box.  
    • Nah no bearings, just slip fit.  Would be a reasonably challenging but not impossible job to modify it to run bearings but I'm hoping that's not necessary as I may have well built one myself if I end up spending hours modifying it!
    • Brumbys with good shells are bloody expensive, I've looked at 2 "cheaper" cars, and walked away from both,  plus after some research spare parts are fairly sparce I'm starting to think that I missed the boat on finding a clean one that is straight (ish) and without alot rust I'm starting to think about a old Hilux as panels and other parts are much more available as they sold tens of thousands of them I use to be indecisive but now I'm not sure
    • A Brumby would probably fit a big metal toolbox in the back... this is how it begins  
    • Picked up a new OEM boot seal for the MX5 today as the old one got ripped a bit by me being a idiot by seeing if I could fit a large metal tool box in it, it didn't fit, and ripped the seal with the corner of the tool box I am still waiting on time to get the cams and new balancer installed, as well as the repairs to the boot Time will not be an issue soon though
×
×
  • Create New...