Jump to content
SAU Community

Recommended Posts

Im potentially looking at a new ecu for my 34gtr, currently running power fc djetro but I want something that is a lot smoother. The 2 options I'm investigating are the haltech platinum pro and the vipec, both are plug in. I'm no ecu expert And would appreciate any input. I have ruled out the hka fcon pro because of cost.

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

running the original, Link G4 Plugin, fantastic ecu. I looked at the Adaptronic/Haltech options etc, but tuner (Trent @ Chequered) advised to go with the plugin, as did Rob @ RIPS. Also have flex-fuel setup with wideband as well, all good :)

What are the prices on each unit?? Haltech is quite a bit more isn't it?

The vipec I have found for 1650 (via online business) and the haltech theres one the forums here for 1750....if not normal RRP o both is 1850 and 2200 respectively.

Trouble Im having atm is that businesses i speak to are pushing the product i sell (which i would do if i was a business).

The thing I like about the vipec is the 4D map tuning for the GTR. Using TPS off boost and MAP on boost, to give it standard ecu like smoothness. Also has 4bar map sensor, antlag, launch control and flat shifting. Thing i dont like is you just get a board that has to be placed into a std case.

The thing about haltech is a lot more businesses are using this ecu. The fact you get a proper ecu and not a board.

Only had the pfc DJetro in for a day and not really a fan, just isnt nice and smooth to drive.

to my knowledge, the haltech has the same options that you have listed...

launch control, anti-lag, flat shiffting.

only comes with a 20psi on board map though, so extrat sensors will be required if going for big boost.

ive got a haltech pp in my 32, and couldnt be happier.

find out which has more support from tuners in your area, no good getting and ecu no one can tune.

oh, when i start and run my car, you wouldnt be able to tell it isnt stock.

if youre down near sydney anytime soon, and my engine is back in, pm me, and ill take you for a run...

good luck with either way you go.

wasted smaeshted spark.

ive tuned 900hp 6 cyl 6's with wasted spark, passed cars in botany with the IM240 emissions test with them also.

even tested wasted setup's with non wasted setup's back to back on same car, car did not even leave the dyno.

grab the vipec and you will never look back. just make sure you have a good set of coils. (splitfires would do you nice)

i was about to say, if your no ECU expert why ditch a proven setup thats worked on many cars?

there would be lot of djetro BNR34's out there id imagine and its all in the tune (and install) i suspect

particularly with twin map sensors and individual throttle bodies

get the tune checked before you bin a good working setup and fork out cash

theres no reason 1 ecu would be "doughey" and another isnt

its all how it is tuned

the only time youd expect a "doughey" ECU and not a "doughey" tune is if you lack load points, ie like a really nasty 8x8 ECU or something simple like that with limited tuning abilities

if the djetro PFC is setup properly and tuned correctly it should perform the same as the other ecu's

in the tune, as Trent was advising me to go the D-Jetro had i not wanted to go flex-fuel etc etc - D-jetro is more than capable.

Vipec is a rebadged Link, so they're exactly the same. I just preferred to buy direct from Link as they are Christchurch based and unfortunately lost their HQ in the earthquake :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
×
×
  • Create New...