Jump to content
SAU Community

R33 Diff In A Ba Falcon?

Charlie4401
 Share

Recommended Posts

Charlie4401 Community Regular

Charlie4401

Posted
  • Author
Posted

Guys, be fair

The R33 diff is a common conversion into BA falcons in drag racing and speedway circles. The trick is, that you need to use a front diff out of the GTS4 (NA). This will bolt straight in but you'll then have to convert the Falcon to 4 stud at the back. You'll also need to fit the Skyline steering rack and lock it out, but this has the benefit of giving you adjustable toe on the back of the Falcon. If you're half smart you can put a tee line into your power steering return lines, install a couple of electric solenoid actuated pilot valves and connect this to the unused terminals in the Falcon ECU to give you HICAS (you;ll need to call your local Pirtek dude to make up the hyd lines for you, as the Skyline and Falcon hydraulic fittings are different - Skylines use 1/4" BSPP and Falcon uses 3/8" NPT). Again, a little known fact that Ford played around with HICAS style rear steering, but gave it away as too costly on their budget spec taxis.

True

u wouldn't happen to know what the difference is between the front and rear diffs out of the skylines.???

warps Mentor

warps

Posted
Posted

The front diff is in the front and the rear diff is in the back

the front diff is open but you can convert it to LSD with a Phantom Grip assembly. To increase the locking, you use coarse lapping paste between the faces. Note you'll need to build up and machine the faces every 5000km because they'll wear out so quickly.

Problem.jpg?1236877228

Charlie4401 Community Regular

Charlie4401

Posted
  • Author
Posted

Actually you would be better off putting the below diff into your Falcon..

Komatsu HD785-5 Differential Assy

100% guarantee that you will not break it!!!

yeah cheers for that cuz i really needed another wanker telling me wat to do.... shut up unless you can make a good point about what i'm trying to do!!!

MadManz Enthusiast

MadManz

Posted
Posted

yeah cheers for that cuz i really needed another wanker telling me wat to do.... shut up unless you can make a good point about what i'm trying to do!!!

Oh dear!

Not my fault you drive a tractor... Just out of curiosity, have you asked this question on the ford forums?

Miguelone Grand Master

Miguelone

Posted
Posted

Why do yo9u want to? Why not just put in a falcodore clutch type LSD and be done with it. The viscous LSD isn't all that great and any entry/mid level aftermarket centre you will get for the 33 diff will be clutch type anyhow. Grab a rebuilt Falcon LSD, chuck it in and bobs your uncle.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      MLR's Bogan cruise ship

      By GTSBoy · Posted

      Por qué no los dos? Body colour red with black stripes down centre, onto bonnet and bootlid.
    • SteveL
      R32 GTR Bonnet Hinge Bolts

      By SteveL · Posted

      From my bolts, standard M8 with 1.25mm thread pitch (M8x1.25mm).    Length is 19mm under the head and has a captive 18mm OD flat washer.   20mm length from a bolt shop is what you'll be able to get.   Make sure they're zinc plated.    If you're concerned about strength, grade 8.8 will be more than enough. Original PN is 01121-04971.  Now discontinued according to Amayama but that's because it's one of the parts that's been captured by the Heritage program, which explains the ridiculous price.   New PN is 01121-RHR20: https://nismodirect.com/nismo-heritage-bolt-pin-hinge-hood-bnr32-nissan-skyline-gt-r-01121-rhr20-01121-04971/ About AUD33 converted from Yen in the above link but that's just one example. Interesting that the hinge-to-body bolts are still available non-heritage.....PN 08116-8161G around $2 each (amayama).    Same thread but 16mm long.
    • GTSBoy
      ER34 RB25DE Auto - Would a flush ever fix an "A/T" light?

      By GTSBoy · Posted

      Well, if that filter was impeding fluid flow, then it could have similar effects to faulty solenoids. The TCU will register a fault when it does something (ie, changes the state of a solenoid) and does not detect the required result. If there are other causes that can make the same lack of result, then they will be indistinguishable to the expected cause for which the TCU has a code.
    • GTSBoy
      R34 RB20DE NEO coilpack?

      By GTSBoy · Posted

      Yellowjackets, red ones, blue ones (other than Splitfire) have all been demonstrated to be unreliable on turbo engines. That unreliability can be anything from outright failure (ie, 4 out of a set of 6 working out of the box) to just not being strong enough for the task, on a boosted engine. Not enough of us care about NA engines to know whether that unreliability is an issue for the undemanding needs of an NA RB20. I should think though that the DIS-008 should fit the 20. There's not really any reason for the head/coil mounting area to be any different on those 2 Neos. I wouldn't be buying Splitfires, or any other old tech coilpack, for a car in this day and age though. I would buy modern pencil coils and do what needs to be done to adapt them to the loom. That's relatively trivial these days, with numerous kits for fitting R35, or Audi, or Yaris/Corolla coils.
    • Ozdavroz
      So i brought a boat...

      By Ozdavroz · Posted

      Keen to see how much work is needed to get an abandoned Skyline going. My R32 has been sitting idle for three years or so but finally got some time to get it going again. (Also lurking SAU and trying to hit 10 posts so I can start my own intro thread with pics)
×
×
  • Create New...