Is This A Resistor Pack

[Driftnuttz]

I need one to run my 440cc injectors, and was looking around ebay and came across this. http://www.ebay.com/itm/R32-Nissan-Skyline-RB20DET-Injector-Resistor-Pack-/170695860614?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item27be442186

My harness did have a pack like this plugged into it, but the guy I bought my harness (gts-4) from didnt want to let it go for some reason ( I didnt know what it was and he wanted me to add money on top). I didnt think the rb20dets had them from the factory.

[Dose Pipe Sutututu]

that's your resistor pack, to run the GT-R injectors you will need the GT-R resistor pack

[Driftnuttz]

I am going to run 7mgte (us spec supra) injectors. My main question is, is this one and could I just wire one in where that one plugs in on the harness? In place of hacking the whole harness up.

Edited November 10, 2011 by Driftnuttz

[Duncan]

no you need to hack the whole harness up. There is 1 input, 6 outputs from those pack. 1 output goes to each injector. But it's not a hge deal

[Driftnuttz]

no you need to hack the whole harness up. There is 1 input, 6 outputs from those pack. 1 output goes to each injector. But it's not a hge deal

Again I AM NOT USING A GTR PACK...... The one I posted has 2 wires 1 in and 1 out, the 7mgte has 3 wire 1 in and 2 out. Not all resistor packs are made the same. I am going to use one o those 2, if the stock one will work then its that one cause its plug and play if not than its the 7mgte one cause it matchs the injectors...... I would like to know if the above resistor pack will work with other injectors. I was under the impression that rb20s ran high ind injectors and didnt have resistors on them...