22Mm Breather Hose

[sav man]

Does anyone know where to get 22mm breather hose from (or 7/8 if your an un-educated american). I've tried Hydraquip, Enzed, and Total rubber. Apparently it's a prick of a size

[marinetowing]

Brierley hose and handling would be your best bet.

http://www.brierleyhose.com.au/

If that fails try purple pig

http://www.purplepig.com.au/

[zoidbergmerc]

Purple pig don't have it, I was in there the other day. I just got some 19mm and made it fit!

[ripitup]

Brierley hose and handling would be your best bet.

http://www.brierleyhose.com.au/

If that fails try purple pig

http://www.purplepig.com.au/

I had to use 19mm on the 26 breathers lots of lube and grunting got it on there in the end

[zoidbergmerc]

I had to use 19mm on the 26 breathers lots of lube and grunting got it on there in the end

yeah that's what I did, I just put a tiny bit of CRC on the breathers and dipped the tube in hot water for a bit and jammed it on.

[Burgz32]

i get all my hose through

http://www.tasperformancewarehouse.com.au/speedway/index.html

Luke is the man, and there bloody cheap for the high qulatiy gear that they sell..

[ripitup]

yeah that's what I did, I just put a tiny bit of CRC on the breathers and dipped the tube in hot water for a bit and jammed it on.

sorry to hijack this thread but is there an easy way of getting the fittings out of the cam covers???

[tweetywoof]

Why not just get speed flow fittings and braided??

[ripitup]

Why not just get speed flow fittings and braided??

Thats What i want to do with mine but i need to get the old fittings out

[zoidbergmerc]

how do you get the old fittings out?

[tweetywoof]

I thought they had to be cut off and the speed flow welded on?

[ripitup]

on chris's 26/30 the fitting have been made loose, so he could turn them around to make plumbing his catch can easier but they were already like that when he got the covers. im thinking i would like to remove mine without the use of heat, cutting, welding etc so i could cut threads into them for -12 speedflow fittings..... i know i could cut them off and use weld on fittings but i dont want to wreck my pretty paint work

[sav man]

i'd rather keep the standard fittings so I can keep the bridge between the covers. Also i'm not keen on spending $100 for speedflow fittings, and if I did, i'd run push lock hose over braided every day of the week. Braided rubs through everything

[jangles]

They will pull out with some persuasion, only pressed in there

[Autumn33]

this is true mine came out when i replaced my catch can hoses

[blu hsv]

I just pulled mine out and ran a 1/2 bsp (it think) tap thought it and got speedflow fitting and screwed them straight in. the hole was the perfect size i didnt even need to drill it

[ripitup]

I just pulled mine out and ran a 1/2 bsp (it think) tap thought it and got speedflow fitting and screwed them straight in. the hole was the perfect size i didnt even need to drill it

Thanks Guys i will pull them a bit harder then

[zoidbergmerc]

Thanks Guys i will pull them a bit harder then

hehehehehhehehehehhehehehhehehehehe

[XRATED]

Pretty shure Briley's stocks some 7/8 Alpha goma pushlock hose.

[sav man]

i've gone with some 19mm breather hose from woolys recomendation. i'll see how it goes