Jump to content
SAU Community

Recommended Posts

Why do it with an r33.

R34 rollers are scarce but fairly cheap.

Building something like it won't really fit many categories so why waste time and effort with an RB when there is a much larger cap inline 6 floating around now days with much more to offer.

Hang on sounds like the car I've got in the build.......

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Why do it with an r33.

R34 rollers are scarce but fairly cheap.

Building something like it won't really fit many categories so why waste time and effort with an RB when there is a much larger cap inline 6 floating around now days with much more to offer.

Hang on sounds like the car I've got in the build.......

I am not too sure Skyline owners are very good at math :) Some of the do this and do that for all less then 25k etc seems waaay optimistic.

I think the GTR will win in most conditions, however I think a rwd platform that is 200kgs lighter can be as quick, if not quicker in some circumstances. There is always the issue of what you can do yourself and what you do with the car. AWD is a pretty big bandaid

It seems that a GTR in rwd form, purpose built that way would more then likely be better then a straight gtst. Purely due to the car having a better all round setup from factory. Slightly wider track, provision to run bigger wheels/tires which is quite important. This is severely limiting in a gtst. The most obvious one being the stance of the gtr makes it looks a hell of alot tougher then a gtst!

Have you seen the stance on my car? I'm running wider track than most GTR's. Not exactly pretty but it's a race car.

Wasn't at all expensive but you probably guessed that :whistling:

I am not too sure Skyline owners are very good at math :) Some of the do this and do that for all less then 25k etc seems waaay optimistic.

I think the GTR will win in most conditions, however I think a rwd platform that is 200kgs lighter can be as quick, if not quicker in some circumstances. There is always the issue

of what you can do yourself and what you do with the car. AWD is a pretty big bandaid

I couldn't agree more with your first paragraph.

It can be done on a tight budget if you rummage around for parts or have heaps of gear lying around.

Those cars end up as shit boxes that never lap near their potential though.

To physically go out and buy parts/knowledge costs.

I've outlined budgets for people then told them to double it to finish the car.

Just to add, I guess if you take the line that you already have a R33 GTR (i.e. like I do) and then you make a decision one way or another. Sorry, just to keep the thread on a lead.

First thread start in this section so please be gentle.

Thinking about track/race only R32/R33/R34 GTR's with no 4WD... is the trade off between the weight lost at the front without the front diff., drive shafts and also transfer case behind the gearbox be a greater advantage over the 4WD grip?

When you consider when you remove the front sump/diff. you could fit a custom shallow dry sump oil pan, without the transfer case you could fit a ex-Supertaxi seq. box without worrying about the transfer case.

The GT cars in Japan were all rear wheel drive only be it for rules or reliability.

What are peoples thoughts?

The trade off for the weight loss of the 4WD system is a slower lap time, ie remove the system and go slower. Dont waste your time just to struggle with the other GTST's.

Oh and by the way the "supertaxi" gearbox is a Holinger. Originally designed to fit in a - wait for it - R32 GTR. True story.

I am not too sure Skyline owners are very good at math :) Some of the do this and do that for all less then 25k etc seems waaay optimistic.

I think the GTR will win in most conditions, however I think a rwd platform that is 200kgs lighter can be as quick, if not quicker in some circumstances. There is always the issue of what you can do yourself and what you do with the car. AWD is a pretty big bandaid

Roy, that post is spot on!

Name a race series where awd has not been outlawed, or is not the only way to win. Sierra was more than 200kgs lighter and had similar hp (towards the end) and got smashed.

ATCC-We all know what happened there

BTCC- awd had about 100kg penalty, then got banned

JGTC- awd outlawed

WRC- 2wd last won a round in late 90s

Superlap- awd dominating..

The list goes on..

Name a race series where awd has not been outlawed, or is not the only way to win. Sierra was more than 200kgs lighter and had similar hp (towards the end) and got smashed.

ATCC-We all know what happened there

BTCC- awd had about 100kg penalty, then got banned

JGTC- awd outlawed

WRC- 2wd last won a round in late 90s

Superlap- awd dominating..

The list goes on..

it also only ran 9" wide tyres while the GTR ran 11" wide tyres, so you can't accurately compare the 2. they were in different classes.

in the rwd vs awd argument it is worth considering the performance/lap times of the rwd porsches vs the awd 911 turbo. you will find that in most cases the 911 turbo (awd) is slower than the lighter, less powerful GT3. have a look through the nurburgring lap times and you will see that the 911 turbo comes in after the GT2 (rwd, but has more power), the carrera GT (obviously) and the GT3 RS (lighter, less pwoerful, RWD)

  • 1 month later...

There are way to many factors here.

Your never going to be able to drive a 800Hp GTS on Hard semi slicks... Obviously the class you want to run in will always be the biggest factor.

Say you do want a high HP GTS to run in Time attack with Semi-Slicks,

The GTS will obviously be struggling with corner exit and to help with this and the over-all drivability of the car you will have to make it squat, move around and soft. In turn reducing the good entry and mid corner speed you have just gained through the RWD platform and even still its going to be a handful, with half the amount of off the corner grip available in a GTR. When setting up a car you can only ever have two of the 3 aspects of a corner (Entry - Mid - Exit), corner exit should always be once of the chosen traits of the car. This will even be a more important trait of a car on semi-slicks because its the hardest trait to set a car up for with minimal grip, hence the domination of 4WD cars in the time attack series. Its interesting many people say 4WD induces understeer, i believe this is a common misconception, possibly caused by bad driving, bad setup, a combination of both or just the wrong style of driving suited best for a 4WD car. Mark Skaife described the Winfield R32 GTR to have the best turn in out of any car he has ever driven, it must also be noted that this car had minimal aero; go figure.

I'm also very doubtful if the GTS will weigh much less than a GTR, with high horsepower applications you will need a GTR rear end, Holinger Box, a solid tail shaft and diff. Brad Sherriffs R32 GTS in race spec, even fully lightened, Carbon Doors Etc, weighs the best part of 1350Kg

There has also been mention of the GT500 cars being RWD, firstly its a requirement, secondly; you must remember in GT500 the cars must be only 500hp and run slicks, making mechanical off the corner grip not the biggest of issues. These cars are also driven by some of the most experienced, accurate, precise and talented drivers in the world. I'm very doubtful that many drivers would have the talent to make a high horsepower GTS fast.

Yes a GTS has a lot of Pros, Reliability, Easier setups, cheaper Etc but for outright speed GTR will always dominate.

who ever "risking" is he sounds wise, experienced and knowledgable, he qoutes you just carnt keep front diffs in them, which is correct in moderate to big hp racecars (650 plus on race tyres) so is if reliablity is an issue (which it is front diff, front shaft) wise then is the subject reffering to 1 lap wonders or time attack style racing?

Out of intrest who has run there gtr at either philip island, calder or sandown?

was just wondering what times you fast guys are rattling out over there now as its been a good couple of years since ive run anything at those track and at the time 1.43 on a radial at the island and 1.16 and sandown and 63 or 4 s was the goods at calder, whats the goods these day

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
×
×
  • Create New...