Jump to content
SAU Community

1999 R34 25Gt Rb25De Damaged!


Recommended Posts

Hi everyone,

I'm pretty new to this but anyway I have a 1999 R34 non-turbo 25GT MT coupe. The car is black in colour, has done 102xxxkm. It was imported from Japan in September last year at 85xxxkm. I was the only Australian owner.

So the important bits:

Car is written off!

Extensive damage to front of the car: bumper, headlights, front side panels, a little damage to the bonnet, no rear view mirrors.

Good news is the car starts and runs fine (was able to drive it home 500m with police assistance without any problems).

The interior is in good condition.

Pretty much stock standard all through only has splitfire coils (near new installed at 97xxx) and a 2.5in Nismo exhaust. Serviced regularly every 5000-7000km. Major service done at 90xxx where the water pump and timing belt were replaced. Also has a sunroof.

The point of this post is to just see if there is any demand for a car in this condition. Any reasonable offers will be considered. The car is situated in Clayton, Vic. I will hold onto the car for a couple weeks and then start selling parts so if you are in need of some specific parts please contact me and we can work something out if you still need them when I decide to start selling parts. Pictures should be up on Monday when the pickup is organized and inspections will be available most days from Monday.

Link to comment
Share on other sites

  • 2 weeks later...

So i finally got the car back from the insurance company so i can put so pictures up so car is for sale until next Monday and if no one is interested i will begin to part the car out. If the part out begins and you want certains prices just shoot me an email and i will tell you if its available plus the price. Thanks.

post-87376-0-09798700-1322198137_thumb.jpg

post-87376-0-38198600-1322198145_thumb.jpg

post-87376-0-42938600-1322198148_thumb.jpg

post-87376-0-87789500-1322198155_thumb.jpg

post-87376-0-18362100-1322198167_thumb.jpg

post-87376-0-61104900-1322198176_thumb.jpg

post-87376-0-61447800-1322198186_thumb.jpg

Link to comment
Share on other sites

Car is now for part out

Engine + Loom and ecu and gearbox is currently on Standby as i mite already have a seller.

R34 splitfire Driven less then 2000km on them bought them brand new $300

Windscreen washer bottle $15

Seatbelts $45 ea

ABS unit $70

Brake master cylinder and brake booster $70

Rear shocks and springs $50

Overflow bottle $20

Manual Dashboard $90 less then 100,000km on the clock

radiator $100

R34 Steering Wheel Airbag $90

Climate control Unit $110

Boot $80

Power window Motors 80$ each

Power window Switch 80$

air condensor $90

if you have parts that you want pm me and ill get back to you on a price.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • It depends on what the guy who bought its Ratio is. Mine is a 4.36 Jus Jap told me anything above a 3:9 has equal length shafts which the Nismo center's shafts were not.
    • If those shafts in the last 2 photos are the ones that came with the diff, you have no hope of fitting the other ones because they are completely different 
    • I have recently fitted a Nismo GT Pro Center second Hand buy still in the box i got stubs with it but they are 5 bolt and I need 6 (3x2) I was told by Just Jap that for a 4:36 ratio the stub axles are equal length sku 38220-0V161. They didn't have any in stock but I picked up the ones pictured. The one with 5 bolt are the ones that came with the LSD. The right side went in no issues but the right....I have happened the fk out of it put it in a press and it still sticks out about 5mm too far. It was sticking out about 25mm but after bashing it like Chris Brown did to Rhianna I managed to get it a bit further in but seems stuck again now. Any ideas? Should I just leave it 5mm out and send it?        
    • Meh. I "see" a typo above, that should have been "sell".
    • The clutch pedal has a procedure for adjustment. This can only be done after you are 100% sure the system is absolutely free of air bubbles. You must bleed the clutch master cylinder first, then the "separation pipe" which is the clutch damper line, then the operating cylinder as detailed in the service manual. Also, you must fully depress the clutch pedal between shifts. Just because you can't feel it grabbing does not mean the input shaft is truly decoupled from the crank. At high RPM clutch plates are vibrating and moving around, you need to give it the best possible chance of success. On the BCNR33 Nissan revises these adjustment procedures slightly but not by much: I would be careful with trying to play games with these adjustments. As for the Nismo operating cylinder they say a lot of things. In practice the twin plate clutch needs less movement on the clutch fork to disengage because the whole stackup of the flywheel + friction plates + pressure plate is much taller. Personally if you find that the clutch still disengages too high at the top of the travel I would try the Nismo operating cylinder. Make sure to follow the air bleed procedures. 
×
×
  • Create New...