Jump to content
SAU Community

Wrecking My 1993 R32 Gts-T In Point Cook [Vic]


Recommended Posts

  • Replies 158
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Updated list of stuff. Probably well over due. There's still plenty more to go; if it's not listed here, just ask.

r32 gts-t shell - $offer!

Engine mounts - $30

Rb20det engine loom $40

Lower dash trim - $20

Door cards $40 for both - passenger door card has a tear near the mirror - easily fixed

Mirror triangle cover thing - $20

dash in good condition some very small bubbles (didn't notice until i found out these things bubbled up) $100

centre console storage thing between the seats $20

centre console surround that the storage thing connects to $20

rear wiper motor $20

passenger door with window and motor (minus door card and mirror) $60

dash cluster surround (minus switches) $40

Passenger side A pillar trim $20

boot trim minus cover for wheel arches and boot carpet $30

Mirrors - $40 each

front windscreen (has small chip - been there for years, no probs) $100

rear windscreen $200

drum brakes (in bits and pieces) $10 for both

tail lights $40 each

rear bar $40 - has one dint and one scratch

passenger side front guard (has slight bend) $20

kick panels - $10 each

Rear callipers $150

Rotors x 4 $100

brake booster $40

3" catback exhaust - straight through muffler and doesn't get attention (looks kinda stock) $100

stock dump pipe to cat including sensors $40

Pod filter $20

AFM $100

hicas rack $40

fuel tank $100

fuel pump $30

Interior carpet $50 - has a tear in the driver's side (probably easy to conceal/fix), otherwise perfect

Centre dome light (without cover) $10

front reading lights $15

roof lining $30

stock crossover pipe including BOV $40

Stock rb20det side mount intercooler $30

rb20 power steering reservoir (minus cap) $15

A/C compressor $20

boot hinges $20

front windscreen wiper motor $40

HICAS computer $30

steering column $40

alternator $5 (not sure of condition - i think a bit of battery acid spilt onto it or some crap, doesn't turn easily)

hazards/tune/wiper switch (headlight switch already gone) $20 each

Passenger side rear quarter trim arm rest thing $20

Stuff that's gone -

hand brake handle/cable

centre vent - $80

driver's side round vent - $40

Driver's side rear quarter trim $20 each

rear wiper arm

dash cluster (218,635kms) $30

indicator stalk $40

Driver's side A pillar trim

glovebox $50

sun visors $20 both

rear vision mirror $20

door seals - driver's side has one crack in it, passenger side perfect $60 both

passenger side quarter window $60

driver's front guard (rooted from accident) - free!

bonnet (rooted from accident) - free!

Front callipers x 2

rb20det $offer!!

starter motor $50

Centre dome light cover

rb20 power steering reservoir cap

Climate control panel $60 - not sure if the lights in it work

bonnet hinges $20

front seats

rear seat

front wiper arms $20 for both

Washer bottle $20

rear pods $70 pair

Stock manual ECU

clutch+gearbox etc for manual conversion (still have flywheel)

passenger seat belt

interior mats

6 x injectors

Trim around the steering column

Turbo

Power Steering Rack

Stock coils

Ignitor

Driver's side door (just the door itself and window/motor mechanism)

Passenger side vent

Headlight switch

centre console tray holder thing

fuel pump cradle. Still have fuel pump

front seat buckles

ash tray

front fuse box fuses/relays/whatever

driver's side window control

diff

b/c pillars

locks/keys

brake master cylinder and 3 brake lines connecting to it.

Driver's side rear quarter window

inside passenger door mirror cover.

Boot lid

side skirts

Black metal intake pipe

Half shafts

fuel filler neck

fuel lines

Fuel flap

power steering pump

wheels/tyres

wheel jack

plastic knob cover for light switch

metal panel between boot and back seat

Metal trim around driver and passenger windows

Coolant temperature sensors

Speedo cable

window washer/wiper knob

alternator tension bracket

hubs/5 stud conversion

Driver's door power window relay

Accelerator pedal and cable

Brackets that attach the stereo in the centre console

bonnet support rod

Consult cable

Front sway bar end links

Stock cat

Passenger window switch

2 x rear seat "JESUS CHRIST!!1" handlebars

Passenger side interior door opener cover

rear demister switch gone!

Suspension x 4

Plug for front driver's side indicator

Heater core

Boot/fuel cap cable

Headlight wiring loom PENDING PAYMENT

Edited by verger
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...