Jump to content
SAU Community

S15 / 13 / 180Sx Parts - Servied Sr20 99% Complete Head With Tomei's , 280Kw ++ Turbo Setup, Clutch, Diff, Auto Box, Plus Heaps More!


Recommended Posts

Parts are located in Glenhaven (Next to Castle hill for those who dont no), Sydney

Contact me on 0415611553, Txt or call. If i do not answer please text me

In Regards to postage I recommend E-go as it is good and so cheap

180SX/S13/S15 (PHOTOS ARE BELOW PARTS DESCRIPTION)

S15 - Sunroof Mechanism - $200

s15 - front bar - vertex - good condition still can see gel coat, only been sprayed lightly with bit of black can paint - $180

S15 – Gearbox Cross member - $40

S15 - R200 Diff - 54000km's - Speed sensor included - $250

S13/180sx - REDTOP POWERFC Computer with hand controller and APEXI BOOST CONTROLLER with all sensors $900

S13/180sx - AUTO Gearbox - Perfect condition, 120253km's - $70

180sx - Altezza tail lights (Basically brand new, were barely used) - $120

S13/180sx - AC Condenser/Lines/Pump / belt / bracket and tensioner / all the stuff needed - $250

S13/180sx – Gearbox Cross Member and Rubber Mount - $50

S13/180sx - front seat and rail - wear on right of seat, needs vacuum, no stains - $50

S13/180sx - passenger seat - good condition! - $50

Z32 - AFM - Includes wiring loom - $200

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SR20 – GT3071R 4inch big mouth .62 or 4 rear housing, TOMEI LowMount Manifold, 38MM Tial Wastgate, Screamer Pipe, Speedflow/Earls braided lines and fittings, 4inch hosing that is needed to run the setup in the car.

This Turbo setup hasnt even seen100 km’s, it did few k's on the road and turns 4 to 12 at eastern creek once. The wastegate is brand new did one dyno run. Reason for selling is it didnt make the power I was hopping for.

The setup is good for 280kw around 20psi on pump fuel with supporting mods. This whole package will just bolt straight up to your car, everything is there.

I also have a Z32 AFM conencted to it which is optional to buy if you like seperatly.

This setup owes me $3500, Like i said its still basically brand new....Im asking $2600

I have the PowerFC to match this setup as well! So contact me for details

SR20 – NON VCT RedTop Complete Head without Valves and Retainer Clips. Parts Included are as follows:

  • Head – acid dipped, machined and cleaned.
  • Retainers and Springs
  • Cam gears
  • Head Studs
  • TOMEI 260/260 Cams
  • Timing Chain
  • Rocker Arms
  • 4 Layer Metal Head Gasket
  • Brand new Eristic head gasket ill throw in for free
  • Box I had lying around with spare sr20
  • gaskets etc

This is a bargin as CAMS alone New are $740

Asking $400 for everything! Cheap As F**K WANT IT GONE!

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

SR20 - Cushion Button Clutch and pressure plate. Still good meat on it. few hot spots. Locks up hard - $150

SR20 - 2x Redtop Coil pack looms - $20 each

SR20 - Dash 10 sandwich plate adaptor (for oil coolers or oil filter relocators, has one speed flow fitting still on it) $15

SR20 - AUTO Gearbox - Perfect condition, 120253km's - $100

SR20 - Flywheel - $50

SR20 - Redrilled 550cc Redtop Injectors with Fuel rail and Injector clips- Speedflow fitting on the end (was told these were laser drilled when i bought my motor however iv never used them) WILL THROW IN 'RISING RATE FUEL PRESSURE REGULATOR' FOR FREE - $150

SR20 - Redtop Engine Wiring Loom/Harness - $130

SR20 - ‘Sand Blasted' STANDARD Intake Manifold (Looks brand new) - $50

SR20DE - Cosmetic Headgasket - $50

Universal – 180sx/s13/14/15/300zx plus many more - Brand New adjustable suspension coilover springs, comes with coilover keys ( Fit on any type of shock absorber, can be adjusted 2 to three inches in height. For people who dont wanna spend the money on coilovers

$30 - Auxilary Cooling FAN from Cefiro

These are what the taillights look like****

6563_12.JPG

314493_10150338287181191_565421190_8296716_88034952_n.jpg

381346_10150338287471191_565421190_8296718_347467689_n.jpg

381282_10150338287796191_565421190_8296725_1787704682_n.jpg

302944_10150338285906191_565421190_8296706_414800903_n.jpg

302974_10150338286371191_565421190_8296709_1050009449_n.jpg

311959_10150338288151191_565421190_8296726_1374632272_n.jpg

310324_10150338288871191_565421190_8296731_174529018_n.jpg

305348_10150338289456191_565421190_8296740_65446725_n.jpg

318601_10150338293401191_565421190_8296766_760793929_n.jpg

295790_10150338292281191_565421190_8296754_550088020_n.jpg

303992_10150338290886191_565421190_8296748_1762896628_n.jpg

389305_10150338290346191_565421190_8296744_1287046194_n.jpg

295958_10150338291081191_565421190_8296749_181679931_n.jpg

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Honestly, for a daily I would gladly rock a Camry. The more disposable the better. People drive horribly out here and road conditions are awful.
    • Verify it's going into each of the 4 gears in normal acceleration, make sure the torque converter locks up over ~65-70 kph or so at low throttle opening. If you ease into the throttle at those speeds eventually you should get a "gear" between 3rd unlocked and 4th locked. It should downshift eventually if you floor it at 65 kph too. Get some Matic D ATF and drain the pan, check for signs of sadness in fluid and drain plug magnet. Top off to the correct level afterwards. If the transmission is worth saving you can drop the pan on a second drain and change the filter while you're at it. These are not complicated transmissions, at least compared to modern stuff.
    • A seat I find stupidly comfortable to sit in is the one in a friend's Merc Race Car. It even has the huge wings that wrap around your head. Best ever. Only issue is climbing through his scaffolding he put up in the doorway of the car... Ha ha ha. I sat in that seat for a couple of hours doing wiring. Another stupid comfortable seat I find, especially if my back is aching, is my OMP fixed back bucket seat too. I'll just sit on it when I'm exhausted in the garage sometimes to relax!
    • I just got off the phone with Dean from Vosta in Brisbane. They are the ones that do the replica seats and they have a shop full of seats for my to try out. Lovely guy.  I haven't decided whether to go genuine or replicas, I'm leaning towards Genuine at this point but who knows.  Also thinking the STRADIAs are the way to go VS the GIAS since they have a lower hip edge and would be easier to get into. Don't really like the idea of arm rests on the models to the right of this diagram either, maybe they can be removed?
    • From my own first hand experience, keeping power for a fun Street able skyline down at a responsive low 200 wheel KW, is the best. It makes it super drive able through the twisties, you're not just smashing mass wheel spin, or only able to open the throttle for a split second before being at absurd speeds. That said, plenty of people like being morons at more than double the speed limit on public roads and hence are happy with 600whp and seeing 200kmh fly up frequently and fast. Also, at that low 200, a GTR can still do a decent quarter mile, and with a bit of fancy  clutch work (foot, not the parts) can still beat many many cars in a traffic light gp, even in the wet.
×
×
  • Create New...