Jump to content
SAU Community

Recommended Posts

Hi guys I need some advice here,

I have noticed when I enter corners at high speeds the rear suspension tends to not cope with the balance as I would like it to. It's a bit soft...

I would like to keep the comfortable drive but to improve this problem are coil overs my only option or would sway bars fix it?

Opinions would be appreciated:)

Link to comment
https://www.sau.com.au/forums/topic/383596-handling-and-suspension/
Share on other sites

Hi guys I need some advice here,

I have noticed when I enter corners at high speeds the rear suspension tends to not cope with the balance as I would like it to. It's a bit soft...

I would like to keep the comfortable drive but to improve this problem are coil overs my only option or would sway bars fix it?

Opinions would be appreciated:)

Do the sway bars first. That will make a huge difference to the handling, be easy to install yourself & relatively cheap (even if paying someone to do the work). Check with Dale (Daleo) on here who supplies Whiteline swaybars at a good price delivered to your door. There should be a thread from not too long ago.

Coil overs will also help but you risk losing a little of your comfortable ride (unless you buy correctly), cost a lot more & are more difficult/costly to install. Of course they provide other benefits like lower ride heights...

Cheers, Leon.

Edit: I found his group buy link here http://www.skylinesaustralia.com/forums/topic/363819-v35-whiteline-sway-bar-group-buy/page__view__findpost__p__5805363. Just check as he may be able do them individually now.

Edited by Commsman

do these skylines have the traction issues that 350z are known to have??

I looked into working the engine in one of these or the 350 (probably turbo) but found with the 350 at least lots of people have traction issues when they take it down the drag strip or around the track.

can anyone confirm?

Might help if you mention what these 'traction control issues' are? I'm not aware of any common issues with the TC on either the 350z or the V35?

I think he means just traction issues, ie wheel spin. Yes, I would think that if you significantly increased the power you are going to have some traction concerns on the strip/track when you are only RWD. Although you would think the cars 'traction control' system would help a lot IF you left it on, lol.

Otherwise, sticky tires & good throttle control will be your friends. :)

I have noticed when I enter corners at high speeds the rear suspension tends to not cope with the balance as I would like it to. It's a bit soft...

I would like to keep the comfortable drive but to improve this problem are coil overs my only option or would sway bars fix it?

To keep your ride near where it is now, sway bars are the best option. You'll find the car skips a little more around the bends, but the improvement in chassis response more than makes up for it.

do these skylines have the traction issues that 350z are known to have??

I looked into working the engine in one of these or the 350 (probably turbo) but found with the 350 at least lots of people have traction issues when they take it down the drag strip or around the track.

can anyone confirm?

As a NA 350Z owner, I'm not entirely sure what you're talking about. The Z has more grip than grunt.

It does have axle tramp issues off the line due to the suspension geometry, and that's basically unfixable since its a function of how much camber the rear gets when it squats, but around the corner its got a crapload of grip in the rear. At the limit it does wash the nose if you're not progressive on the throttle, but getting rid of the staggered tyre setup fixes that (you will lose TCS/VDC but ABS still works). The thing doesn't start to oversteer unless you deliberately provoke it, and to keep it sliding once it breaks loose you have to keep clutch kicking.

Fair enough if you're doubling the power and torque by going to a TT kit then you'll find you have traction issues, even with R-Comps, but that's true for any 2WD car. You can't pin that as a "350Z" or FM platform issue.

If you don't take the car on the strip or circuit that often, and you just want a suspension setup for the winding road, I'd recommend doing adjustable swaybars first. If you're still finding it a fraction too soft for your tastes, then get a set of 350Z springs with Koni Yellow adjustable dampers. I've ridden in a few Zs with quite a few aftermarket suspension setups (Cusco, Zeal, Tein, Bilstein, HKS) and my favourite for street use was when I had OEM 350Z springs with Koni Yellows and adjustable swaybars.

Does your car have the LSD? I know that, historically, viscous LSDs have copped a bad rap, but the one in the FM platform cars actually works quite well. If you can't afford to buy a Quaife, and I'd avoid all the clutchpack LSDs for street use, then make sure your car has at least the OEM VLSD.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's unfortunate what Tomei USA has done to Tomei's name in general. I'm very weary of ordering parts from them now. I only order direct from a Japanse source (e.g Nengun). At least their logos are different, so you end up knowing what you have. 
    • Update Issues 5 (plus #4) - 10 After making a claim about issue #4's missing part, DeAgostini Japan sent a whole new issue #4 and it arrived about 2 weeks after that. That was back in early March. It took another 4 weeks to receive issues 5 - 13 though. This update is for issues 5 - 10. Ove the 5 issues the front left suspension and most of the engine have been completed. The quality of the castings and fit of the parts is quite good, it seems better than DeAgostini's BNR34 Skyline GT-R from the Fast & Furious 2 movie, which (to me anyway) doesn't seem to have as tight tolerances or quite as accurate castings.  Each issue has a lot of info about the 1989 - 1993 Skyline range and other Nissan models from that era, but the focus is on the BNR32 Skyline GT-R Nismo and the various racing it did in Japan, Europe (Spa 24hrs) and of course Australia. I've included some text translated with Google Lens in some photos and will add to them if there's anything worth including. 
    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
×
×
  • Create New...