Jump to content
SAU Community

S A U N S W - Texi, Sos, 12Th February 2012


Recommended Posts

  • Replies 209
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i seem to pull around 1-1.2G on the street with no worries.

and the last "kahna" type event i went in, was also ok.

ive got plugs to install for the speaker wiring, just not the power.... ....yet.

and still have to buy an extinguisher.

but looking forward to the day.

my first texi, im a little excited :woot:

Tats had metal brackets holding his in... A couple of spins dis lodged it... It then smashed the outter guards to pieces... Causing the car to be around 1 - 2 inches wider on each side...

You will be surprised the G-Forces that you pull when you spin a car...

Tats had metal brackets holding his in... A couple of spins dis lodged it... It then smashed the outter guards to pieces... Causing the car to be around 1 - 2 inches wider on each side...

You will be surprised the G-Forces that you pull when you spin a car...

ill im getting from this is cheap pumped guards....

joking, joking, will work on the wiring leading up to the event.

and besides, my straps rated to 2T im pretty sure, and mounted off the rear strut brace, it looks so hectic, all the wimenz drop their pants at the very sight of it :P

Hi all

I'm in as a first timer for TEXI but have let my membershgip lapse,. I will rejoin on the day.

Also, I have sold my V35 and will attend in my...er...um...er... XR8, hope that is okay?

Regards

Geoff

Entry fee paid. Ref : Texi Ryan Ambrose

re the ASAA license- I paid and supplied forms last time, should I have received something in the mail? I have no license number to put down.

now to find money for a new clutch pinch.gif ( or not do hard launches )

car won't be ready fellas, but i will be there spectating and taking some happy snaps.

whens the next one due after this?

All the club events are listed in the 2012 events thread, link is above in the last post of mine

Entry fee paid. Ref : Texi Ryan Ambrose

re the ASAA license- I paid and supplied forms last time, should I have received something in the mail? I have no license number to put down.

now to find money for a new clutch pinch.gif ( or not do hard launches )

Yes shouldve, we can sort that on the day worst case

This event is now on the clubs facebook page, click the link and share with your friends please! Without people coming to these events the club wont put them on :)

http://www.facebook.com/events/148447388602927/

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...