Jump to content
SAU Community

Perth Foundation Day Cruise 3rd of June

skyzerr33

By skyzerr33,
in National Events

 Share

Recommended Posts

Pva_Glue Grand Master

Pva_Glue

Posted
Posted

Beat me to it Troy! heheh...

PERTH SDU FOUNDATION DAY CRUISE 3RD JUNE

Start at Omni West the home of SDU WA hehe.

Righto there is BBQ lunch at Mandurah so bring your snaggers and buns or money for the take out shops. Also make sure you have a full tank of petrol. Enjoy and all of Cruise Nazi Joes normal rules apply.

Meet at 10:0

Leave at 10:30 sharp.

skyzerr33 Grand Master

skyzerr33

Posted
  • Author
Posted

PERTH SDU FOUNDATION DAY CRUISE 3RD JUNE

Start at Omni West the home of SDU WA hehe.

Righto there is BBQ lunch at Mandurah so bring your snaggers and buns or money for the take out shops. Also make sure you have a full tank of petrol. Enjoy and all of Cruise Nazi Joes normal rules apply.

Meet at 10:0

Leave at 10:30 sharp.

Exit Omni left onto Railway St

At lights turn right onto Sutherland St

At lights turn left onto Wellington St

At 2nd set of light down turn right onto Milligan St

At light turn left onto Murray St

Everyone Rev there engines and honk as u drive past Fujitsu building where poor Skyzer is stuck at work.

At lights turn right onto William St

Through 2 sets of lights make sure your in the left lane and turn left onto the Esplanade

Stick right at lights turn right onto Barrack St heading towards river.

At light turn right onto Riverside Dr follow it onto Fwy North and take the Polly Pipe exit.

Go through the Polly Pipe and down Graham Farmer Fwy and take the Burswood Rd exit. (2nd one)

Turn left into state tennis center for a regroup.

REGROUP.

Turn right onto Burswood Rd? and follow to round about.

Turn right at round about onto Dome Pl.

Turn left at round about and continue to lights.

Turn right at lights onto Great Eastern Hwy becomes Canning Hwy.

Turn left onto Kwinana Fwy ( 7 or 8 sets of lights)

Follow Kwinana Fwy to Thomas Rd exit.

Take exit and turn right at lights, go over bridge

Turn left at lights onto Johnson Rd

Turn left at round about onto Orton Rd, dead end street do a U-turn at end and drive down enough for everyone to fit in for a regroup.

REGROUP.

Next stop Mandurah if you get lost.

At round about left back onto Johnson Rd

At round about left onto Mortimer Rd, through lights and over bridge.

At light turn right onto Kwinana Fwy boost away down the onramp ļ

Follow Kwinana Fwy go through round about becomes Safety Bay Rd

Follow Safety Bay Road straight through next 2 round abouts (cautions cops like putting camera just after the last roundabout).

At next roundabout near bridge turn left onto Ennis Ave.

Follow Ennis Ave south becomes Mandurah Rd

Mandurah Rd becomes Fremantle Road as you get close to Mandurah.

Turn right onto Mandurah Tce follow to Mandurah foreshore for BBQ lunch. Find parking where u can. Since it¡¦s a public holiday it could be hard to find. There are several car parks along the foreshore and near the small shopping centre.

REGROUP and food time hope u brought ur snaggers and buns or theres afew take places close by.

REGROUP

Time to leave and the first scenic view of the day. Find your cars and jump on the queue when u can .

Mandurah Tce going south at round about turn left onto Gibson St.

Follow to end turn right onto Sutton St

Follow to end at lights turn right onto Pinjarra Rd

Take Pinjarra Rd over bridge and continue along becomes Mary St

Go staight through 1st round about follow Mary St around the beach and Robert Point

Turn right at round about (beach on your right hand side) onto Halls Head Pde

Turns left into Clipper Wy

At end of Clipper Wy turn right onto McLarty Rd

Follow to end then turn left into Peelwood Pde

Second street on the left should be Glencoe Pde and a small shoppig centre pull in to regroup.

REGROUP

Back left onto Peelwood Pde

At end turn left onto Old Coast Rd

Follow this over bridge becomes Mandurah Bypass and Fremantle Rd

Follow Fremantle Rd and Mandurah Rd towards Rockingham.

Mandurah Rd becomes Ennis Ave at bridge take exit onto Safety Bay Rd (turn right at round about at end of exit)

Follow Safety Bay Rd through round about and along the beach and it becomes Arcadia Dr

Continue along Arcadia Dr past Penguin Island.

Arcadia turns right onto Boundry Rd.

At end turn left back onto Safety Bay Rd, follow to the end and turn right

This is now the Esplanade and you can see Sterling Navel base on your left.

Drive along Esplanade through the round abouts and past the Yatch Club.

Turn left onto Rockingham Beach Rd

Follow along past the Grain Silo¡¦s and turn into regroup at the Park at Opposite the Bottle Shop at Kwinana Beach.

REGROUP.

Exit carpark left onto Rockingham Beach Rd

At the end turn right onto Kwinana Beach Rd

At the end (giveway sign at lights) turn left onto Patterson Rd.

Follow up through 3 sets of lights and beomes Rockingham Rd

Follow Rockingham Rd towards Fremantle.

Turn left at Cockburn Rd (4th set of lights)

Continue to end then turn left onto Russell Rd

Follow along becomes Cockburn Rd and heads into Fremantle.

Go through 8 sets of lights as Cockburn Rd becomes Hampton Rd, Ord St and James St.

At end (bottom of hill opposite Railway) turn right onto Beach St.

Go around bend and turn right into Victoria Quay Rd and park infront of Passenger terminal.

REGROUP.

Exit the way u came.

Turn right left onto Beach St follow along river front becomes Riverside Rd

At round about turn left onto Preston Point Rd.

Follow Preston Point Rd through 3 round abouts and at end turn left onto Canning Hwy

Go through one set of lights then at turn left into Dunkley Av

Follow along becomes Melville Beach Rd and turns left into Dee Rd.

At end turn left onto Macleod Rd

At round about turn right onto Kintail Rd

Follow to end and Park at Raffles Hotel regroup

FINAL REGROUP

End of cruise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      New to R32 ownership

      By Ozdavroz · Posted

      Very nice - I also have a 92 GTST and hardly see any others around these days
    • xmanz
      Video Edit Programs

      By xmanz · Posted

      When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • Skidmore
      Video Edit Programs

      By Skidmore · Posted

      I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • GTSBoy
      HY51 Fuga Hybrid

      By GTSBoy · Posted

      I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • LjB123
      RB25 Crankshaft Differences

      By LjB123 · Posted

      Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...