Oldish Member - Finally An Intro?

[Force Fed]

Been around the forum for a fair while, thought it's about time I actually do an "introduction" given I am a bit more active + own a skyline now..............

Name is Chris, currently living up in Townsville, QLD - Thinking of relocating but not 100% yet.

I own an 1995 R33 GTR - Non Vspec. Has around 126km on the chassis, original motors fate is unknown, it was given a Stagea 260RS (Series 3 R33 GTR Motor) which has ~96km on it.... Was bought from Nigel - "BIT SUS". - http://www.skylinesaustralia.com/forums/topic/350754-r33-gtr-midnight-purple-340kw/

Absolute dream to drive, ppg box makes it a lot nicer and the powerband is great! (yes -10's are late but still very nice)

It's currently getting a built bottom end..... and then a built head will come at a later date...

Mods List when I bought it................

Engine

Apexi Power FC

Apexi Power Intake kit. (1500kms old)

Tomei Adjustable Cam Gears

Garrett GT2871R-10 Ball Bearing Turbos (HKS GT-RS)

Trust Drag Cooler (110mm thick)

Trust Clear Cam Cover

HKS SSQV BOV

HKS intercooler hard piping

Sard 700cc injectors

Nismo Engine mounts

Nismo Fuel Pump

Nismo N1 water pump

BITSUS Customs oil/air separator – drains oil back to the sump

BITSUS Customs air cooling panel

Silicon radiator hoses

X-Force Stainless Split Dump Pipes

JJR Stainless Front Pipes

Stainless decat pipe

Kakimoto Muffler

Magnetic Sump Plug

Splitfire Coilpacks

NGK spark plugs

Interior

Trust Gearknob

Autometer Cobalt boost gauge

Pivot Digital speedo and 1/4mile timer

Greddy Profec B spec II Boost Controller

BITSUS Customs Blue LED dash conversion

Carbon Fibre trim on speedo cluster and triple gauges

Alpine CDE-104BTI MP3/USB/Bluetooth Headunit with handsfree

MB Quart Front splits

JL rear tweeters

Kicker 4ch amp

Kicker sub

Cliff Designs monoblock amp

Skull and Bones door trims

Power FC hand controller in holder

1kg Fire Extinguisher

Autowatch Alarm and 3 point immobiliser

Exterior

Midnight Purple Paint

Colour coded front lip

Carbon Fibre N1 bumper vents

Nismo clear indicator lenses

Electric folding mirrors still work

6000k HID headlights

LED Parker lights

BITSUS Customs Tow strap

Drivetrain

PPG Gearbox - Custom Ratio 1-3

Exedy Hyper twin plate race clutch with lightened flywheel

1-5th synchro helical cut

Billet input shaft

Billet Selector forks

long 1st gear, close ratio 1-4, and standard 5th

Motul RBF600 Clutch Fluid

Factory Brembo 4 pots front brakes and 2 pot rears

Stainless steel braided lines

Rebuilt calliper

BITSUS Customs Brake cooling guides

RDA slotted rotors all round

Hawk DTC-60 race compound front pads

QFM AR1M rear pads

Motul RBF660 brake Fluid

Cusco master cylinder stopper

Suspension

Tein Type-Flex Coilovers

Whiteline 24mm adjustable front swaybar

Whiteline rosejointed heavy duty front links

Whiteline 27mm adjustable rear sway bar

Whiteline rosejointed heavy duty rear links

Whiteline adjustable rear camber arms

Cusco Drag Rod (completely removes HICAS)

Cusco Adjustable Castor Arms

Factory Front And Rear Strut Braces

Nolathane Replacement Bushes All Round

Wheels

Work Emotion XD9 18x10 +18 wheels in Silver

Toyo Proxxes R888 tyres Front 275/35/18

Kumho KU36 tyres Rear 275/35/18

Now, where the fun began for me.... to build off something already done with the "works"... Well initially I had found that my tow strap was missing, thanks to one of hte smart pricks at CEVA who had taken it off... so I had to replace that.

Engine

JE Forged Pistons 86.5mm

Manley H Beam Con Rods

Tomei Headgasket w/- Intake and exhaust gaskets

ARP Head Studs

ARP Main Studs

Spool External Oil Drain

Trust Extended Sump - 8lt

Tomei / Lewis Engines Oil restrictor

Nismo Radiator Cap

Nismo Oil Cap

To be Ordered for Engine

ATi 1000hp Harmonic Balancer

Reimax High Flow Oil Pump

ACL Race Bearings

Speedflow fittings + Braided line for Oil Drain

Interior

HKS EVC-V boost controller

Carbon Fiber Sheet mounting controller

Removed Pivot Digital Speedo

Genuine Nismo Floor Mats

Nismo AL-Carbon Gear Knob

Exterior

Bitsus Customs CAMS/FIA Tow Strap - Red

Nismo Carbon B Pillar Garnish

Nismo Carbon Spoiler End Caps

Carbon Fiber Exhaust Sheild

Carbon Fiber Spoiler Blade - To be modified to fit properly

Suspension

Tyres were changed for Federal 595-SS' 265/35/18 at all corners

Coilovers were lowered back to normal height, all suspension has been reset...

To be Purchased still:

Carbon A Pillar for drivers with 52mm Pods (Maybe passenger if I can get it)

Carbon Center Console Lid

Innovate Wideband DB-Blue

Stack Gauge 2bar/30psi Pro Control Series Boost Gauge

Haltech Platinum Pro ECU

Fuel Pumps

Surge Tank

And probably a heap of other things to go.. LOL.

and now, back to wasteland.

[hamiltonau]

car looks pretty serious mate, get it to a track pronto!

[EAT26]

Looks pretty, Just like the driver

[Force Fed]

Track will happen when I can get to one Pat, cheers though. I'll be happy once it's all sorted motor wise then onto ECU / Fuel system.

Kyle, same would be said about you and yours. no homo