Jump to content
SAU Community

Recommended Posts

Hi guys;

So long story short, I thought i blew my turbo up - turns out the sound was my power steering or something (still not sure, taking it to the mechanic next week). Went through ALOT of hassle to put on an rb25 turbo and then cranked the car up to find out the noise that I suspected was the turbo was still there LOL! I actually thought the wheels were touching the housing etc which was all in my frikkin head. Mechanic had a look at my turbo after and said the amount of vertical shaft play is 100% perfect for a bush bearing turbo - ZERO horizontal movement and wheels spin free as anything. So here I am now :P (good for a laugh i guess).

I wanted a better low end response rather then power and I never actually got the car tuned or did anything after i put this on - just lazy.

So its up for grabs - has done around 30,000 km's or so. I paid somewhere around a grand for it, Hypergear can confirm I guess - but thats besides the point, I would like $450 for the lot which I think is pretty reasonable (feel free to correct me if I'm wrong). Feel 100% free to come inspect the turbo before you buy it as I'm not a pro and you shouldn't take my word for it - wasn't smoking, no leaks visible anywhere, blades are fine, came off a running car yadda yadda.

Comes with everything pictured (I might have a few clamps etc i can throw in). I can ship it interstate for $30 also. I'm located in Box Hill.

Let me know what you think - this should work really well on an rb25 (or anything when you spend time and tune the bloody thing :P)

dsc4002g.th.jpg

dsc4003i.th.jpg

dsc4004d.th.jpg

dsc4006.th.jpg

dsc4007.th.jpg

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/384138-tr43-turbo-and-accesories/
Share on other sites

Just in case its unclear - here's whats included

- Turbo (no dump pipe)

- 2x silicon joiners

- Braided oil line

- Actuator with hose

- Aluminium intake elbow

- rubber bend (one of the intercooler joins i think)

Items came off an Rb20.

hey mate, is it a 1st or 2nd gen tr43?

I just found out yesterday after someone sent me a PM that there were generation in this, if you tell me how to identify it I can tell you? Pretty sure Stao stopped doing these turbo's shortly after I bought this one ...

thanks mate - yea people have made some decent figures with supporting mods - that was why I got it in the first place. Never got around to tuning it and running some high boost through it =/

thanks mate - yea people have made some decent figures with supporting mods - that was why I got it in the first place. Never got around to tuning it and running some high boost through it =/

lol yeah got those figures without a tune, just bolted it on, chucked it on the dyno, up the boost and just made sure everything was running right.

noticed in the pic there is no actuator or flap, need to supply our own?.. also wondering if you know what profile it is as im after the g3 .82 profile..

perhaps u could email stao with a serial no on the centre cartridge to find out?

if you like PM me and we can sort these out and if all is well ill take it.

ATR43G3 .82 FNT wasn't invented till 2x years after this turbo was built. This is a TR43G1 does not blong to any ATR series, and retired. Its good for upto 250rwkws on a Rb25det with ok response.

r33230kw.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This was a huge help.  We followed the steps,  although shifting into 2nd was actually into 3rd for us,  and 1st was into 2nd ( steps 9 and 11) .  The long flash was the 4th flash.  So shift solenoid A is possibly the culprit.  Is this inside the transmission itself? Or is it accessible by just front the pan? Or is it bolted to the outside of the transmission?  Thanos for your help everyone
    • Can you enlighten me on your best practice regarding these hoses? I don't wanna make the same mistake if you already got a better solution.
    • I have some silicon hoses already, for example engine to watercooler. But yeah, I get the sentiment. The lower intercooler silicon hose is drippy too, despite not being very old. Does anyone except Nismo make these same lines out of rubber? Long term I think they'd be the better replacement, especially since the car won't live as hard a life anymore as in the past nor be driven as often.
    • I know most issues are just age related. But for example the turbo oil drains, there is dash adapters for these and you can just make a braided teflon line for them and (probably) never have them leak again. Also not terribly expensive. Can you even get the factory hardlines from new? Or are they repairable if they break?
    • I know it'd be much much easier with the tool. I hope I can find one that won't take 3 weeks to get to me an isn't a "Asian models kit" that has tons of (to me) useless adapters for a load of cash.   It's a summer project/fun car. I do wanna enjoy it, without endless downtime over and over. So yeah I would even go and buy an engine crane + stand to save myself the trouble of hard to reach or unreachable places going bad later on. Would also be a good opportunity to put on a Fluidamper, renew the mains seals and stuff like that. I have some money on the side that I can use for that, what I wouldn't want to or be able to do is let everything be done by a shop or have my engine completely rebuild right now. I intend to do most of the "doable" jobs myself. Pulling an engine can't be that hard, can it?
×
×
  • Create New...