Jump to content
SAU Community

Recommended Posts

  On 30/09/2015 at 12:12 PM, Mtecher35 said:

No sorry M35.

  On 02/10/2015 at 12:42 PM, Dmyze_ said:

They'd be similar right? If not the same.

It's the same.

Re M35 contact Daniel or one of the boys at Autostrada in Herston Brisbane

Very helpful tell him what motor what transmission etc

Roy

0418276699

  On 02/10/2015 at 9:00 PM, Serious said:

Re M35 contact Daniel or one of the boys at Autostrada in Herston Brisbane

Very helpful tell him what motor what transmission etc

Roy

0418276699

Thanx Guys for your help. I saw these. I hope I am allowed to post this.

http://www.ebay.com.au/itm/171747506122?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

http://www.ebay.com.au/itm/361095785439?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Is that your number Serious? or the guy in Brizvegas, I will put the business his way no problem.

Also I bought my M35 about 2 months ago and came on here to find out about it before & after. Had a problem with the Attesa Pump Relay after the 4WD light came on, solved it with help from info I found on here.

  • 7 months later...
  • 6 months later...
  On 27/11/2011 at 1:09 AM, Commsman said:

Hi everyone

I have a limited number of cruise control systems for sale. They come with the factory switches for your steering wheel & these have LEDs so you can see what the button function is in the dark.

It will take a couple of hours to install & the details are documented. You only need to connect 4 wires (12V, brake x 2 & speed sensor) to get it working, plus the dash light input (from cig lighter) if you want the switches to light up.

You also get the stalk control which you use to program the unit to work on the factory controls & you can even configure it for various levels of responsiveness (tip - leave in factory settings to start with).

The audio controls come in the same harness so if you have the factory sound system then it will just work.

Cost is $490 delivered for the whole kit - an absolute bargain since these ones are typically $900 installed without the steering wheel switches.

PM me for more details.

Cheers, Leon.

post-76144-0-53643400-1322356065_thumb.jpg

Expand  

Hi mate! Would like to get one of your cruise controllers on my stagea m35! How to proceed plz? Thanks

chris

Hi sau wagoneers ! Can someone around melbourne or vic be able to help me , i want to buy and install a cruise control on my m35 ! Im new to australia as im an internal student! If someone knows where to go, who to call so i can get it installed properly plz help me ! Thx

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • ...oops. forgot the TCU end...
    • No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...