Jump to content
SAU Community

New Toymota "sports" Car

Cowboy1600

By Cowboy1600,
in General Automotive Discussion

 Share

Recommended Posts

God_speed Veteran

God_speed

Posted
Posted

Thanks for all the photos and info God_speed. What is the quality of the interior like? I was in a new Prius about 2 years ago and it looked really dodgy to me. As that is coming from a VL owner/devotee that is quite a strong criticism :)

The parcel shelf brake light might be a Toyota Australia addition, I'll have a look the next time I see a JDM one, might be a while though as they aren't too common although I did see a orange/bronze one yesterday.

You're right, it depends on what you're used to. There are certain things which make it seem cheap, like some of the switchgear, and the door cards and faux carbon dash are quite hard plastic. But the bits that you actually touch frequently are fine; the wheel is leather (as well as the gearknob and handbrake lever) and there's a nice pad around where your left knee braces against the dash; that was a nice surprise as I leaned into a corner and I suddenly noticed it. You make a good point on the ADM aspect of the rear centre stop light - you'd think they could do a better job than that!

And Aussie buyers should be thanking us and our focus group participants... one of the original interior plans was for the steering wheel, handbrake lever and gearknob to be covered in red leather - which unsurprisingly got a panning from 95% of people we spoke to. The black leather with red stitching we ended up with is nice.

  • Replies 355
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

odessy Enthusiast

odessy

Posted
Posted

Been following this since they released the concept and being a previous ae86 owner I think it's awesome! Who cares about 1/4 mile times, this car was made to drive around the mountains. Mum is taking one for a test drive tomorrow after a bit of convincing from me and my brothers, next we will start working on the supercharger, any ideas on how to sell it?

adamskill Mentor

adamskill

Posted
Posted

went and had a close up look at a gts at our local toyota dealer. looks alot nicer in the flesh than on paper. ALOT smaller than i thought it would be. i was quite shocked. im not sure if it was just this dealer, or australia wide, but the waiting list for a gt86 manual (the base model) is f**kIN AGES!!

God_speed Veteran

God_speed

Posted
Posted

went and had a close up look at a gts at our local toyota dealer. looks alot nicer in the flesh than on paper. ALOT smaller than i thought it would be. i was quite shocked. im not sure if it was just this dealer, or australia wide, but the waiting list for a gt86 manual (the base model) is f**kIN AGES!!

Basically Australia wide; but the waiting list for the GTs (base grade) is shorter than for the GTSs. There are even fewer BRZs allocated for Oz so they're in even shorter supply.

God_speed Veteran

God_speed

Posted
Posted

Seen one today being punted around eastern creek GP circuit.

I'll post up its time when NATSOFT updates.

It was 100% stock.

That will be interesting Mark. An Autocar article I read on the weekend put the 86 a second or so behind a Mk VI GTi around a dry circuit, they said its torque deficit was the main reason for it being slower. It's supposed to be pretty well balanced on the track.

Seano350GT Veteran

Seano350GT

Posted
Posted

I had a silver one in our yard the other day, took it for a spin it is a lot smaller than it appears on paper as people have been stating. It's got guts but it's by no means what i'd call a fast car..

86's are on back order til January 2013, BRZ was COMPLETELY sold out in 3 HOURS on the market online and they're on back order until Jan-Feb 2013 too. Toyota is going to sell a shit load of these cars.

*LOACH* Veteran

*LOACH*

Posted
Posted (edited)

Thanks for all the photos and info God_speed. What is the quality of the interior like? I was in a new Prius about 2 years ago and it looked really dodgy to me. As that is coming from a VL owner/devotee that is quite a strong criticism :)

The parcel shelf brake light might be a Toyota Australia addition, I'll have a look the next time I see a JDM one, might be a while though as they aren't too common although I did see a orange/bronze one yesterday.

Checked a JDM 86 today and it looks like they have the same parcel shelf brake light.

Edited by *LOACH*
  • 4 months later...
God_speed Veteran

God_speed

Posted
Posted

Looks like the 86 just scooped the Drive COTY award for 2012 (base GT version was tested and just pipped Subie's more highly specced, but higher-priced BRZ).

Seeing quite a few of them on the road now too! The orange colour looks the goods I think.

ras1983 Experienced

ras1983

Posted
Posted

I test drove one with a good mate a few weeks ago. I think it was the GT model. I'd buy one as a daily if I had the money. Yes they're a bit down on power but in real world terms they're as quick as hot hatches, which is plenty fast for a daily driver. And they use little fuel, have small (read: cheap) tyres, Toyota quality, and excellent handling. The reality is a car like the 86 can be driven hard and with a lot of fun on the road while staying within speed limits. Compare that to the average Skyline, where you floor the throttle for three seconds only to find you're in lock-em-up-and-throw-away-the-key territory.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      Do you think the guys in Penrith are install the E85 Kit?
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      Thanks Pac!   I will reach out to them!
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      That is what I will be doing next
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but 2 things of the top of my head, 1. Legalities of nitrous on a street car. 2. No chop chop. I fully understand that there's much cheaper ways to make power, and whilst a wet 50 shot is fairly cheap to install, bottle fills are expensive, and bottles always need to be refilled, and nitrous also has its own inherent issues with reliability, and tuning, from my experience of others using nitrous, it doesn't take alot to lunch a engine real quick if something goes slightly wrong when spraying, if I wanted a big chunk of additional powers, a spooly boy would make alot more sense, disregarding the additional engineering, supporting mods and other logistical issues of sticking a spooly boy on a car that came naturally aspirated from factory  In the end I'm not racing for sheep stations, and I don't really care if people make more power, or are faster than me, or spend less, or more than me, the only thing the car needs to do is drive around and make me smile, which it is doing now Really, I just want a shiny new intake to look at when I'm cleaning the engine bay, and of course, some more induction doorts, and maybe even that 5kw for that elusive 200hp cherry on top that I might get If the FAB9 intake plenum, TB and air filter box thing doesn't eventuate for whatever reason, Plasmaman do one, not as fancy looking, and a fair chunk of more cash is required when including the TB and other bits and pieces that are required to install it, but, it is another option that is available to me if FAB9 one does fall down (but I really, really.....really, want the FAB9 one though) TL;DR. You want what you want
    • zique
      Ceramic turbine damage to engine - what did yours do?

      By zique · Posted

      Been so long since I have been here,seeing SDU is dead. I had that problem on my gtr in 2006 but luckily there was no engine damage,it was inspected by Hytech Engines,race bearings and extended crank collar put in and that was about it. Hopefully yours is sorted now.
×
×
  • Create New...