Jump to content
SAU Community

Parting My Car :(

rad100
 Share

Recommended Posts

rad100 Grand Master

rad100

Posted
Posted

hey all.

im parting my car, as i CBF waiting for it to sell.

so here goes..

shell - $4500

1993 mspec, Clean rego;d shell, sunroof, gtr front guards, geniune N1 gtr front bar, gtr front indicators, BRAND NEW BC coilovers, rear camber arms, front caster arms, hicas lock bar, vanquish roof spoiler, origin s13 boot lip, CF vented bonnet, bolt on rear guards, r34 gtt front brakes with slotted rotors.

NO rear seats, no drivers seat, no diff, no engine, no gearbox, no wheels.

can make cheaper for removal of parts.

engine built rb25 - $6000

s2 RB25, RB25 gearbox with excedy heavy duty brass button clutch

Mahle forged pistons

spool rods

crank was balanced, grub screwed

block decked, honed, acid dipped

block grout filled

nitto oil pump

ross metal jacket balancer

n1 water pump

oil restricters

head to sump oil drain

refreshed head

gtr valve springs

tomei pon cams

r34 neo CAS

r32 gtr rocker covers/timing cover

mines cam cover baffles

working vct

gates timing belt

has done about 1500kms worth of use.

made 350.1rwkw at horsepower in a box on e85.

RB25 gearbox + clutch - $1400

excedy heavy duty button clutch

VSKF - $3000

18x9-6 and 18x10.5 -5

225/40 and 235/40 neutons

black with chrome dish

fuel setup - $500

external pump, surge tank, magnaflow fuel filter, speedflow fittings for pump surgetank and filter

gt3076 .82 + full lines - $1600

surge slotted gt30, .82 exhaust, speeflow fittings and braided lines

1500kms use max.

helps highmount mani - $850

50mm gate port.

Plazmaman intake plenum - $900

rb25 throttle body inc, all fittings and bottom half of plenum also

id1000cc with rail, aeromotive FPR, lines + speedlow fittings - $1200

z32 + plug $200

defi BF gauges x3 - $800

oil temp, oil pressure, water temp, control unit, light up white with black background

bride style seat with superlow rail - $450

takata style harness - $150

tail shaft suit rb25 in r32 - $200

made by hardie spicer

power fc + hc - $1400

i have all my pics on my phone so please txt me and i can mms you what you need to see.

or see my car sale thread for some pics.

contact 0433 290 801.

cheers

Link to comment
https://www.sau.com.au/forums/topic/384532-parting-my-car/
Share on other sites
rad100 Grand Master

rad100

Posted
  • Author
Posted

gearbox shifted and sounded perfect. was out of a 110,000km car.

i never drifted it only did a grip day, and that was more a test for the motor, so it hasnt done hard work.

Link to comment
https://www.sau.com.au/forums/topic/384532-parting-my-car/#findComment-6135782
Share on other sites
rad100 Grand Master

rad100

Posted
  • Author
Posted

shell - $4500

1993 mspec r32

Clean rego'd shell

sunroof

gtr front guards

geniune N1 gtr front bar

gtr front indicators

BRAND NEW BC coilovers

rear camber arms

front caster arms

hicas lock bar

vanquish roof spoiler

origin s13 boot lip

CF vented bonnet

bolt on rear guards

r34 gtt front brakes with slotted rotors, A1RM pads

nolathene bushes up front

3inch cat back

comes with fmic and piping to suit forward plenum

has engine loom to suit rb25 in r32

CD player, front splits and 6x9 rears

NO rear seats, no drivers seat, no diff, no engine, no gearbox, no wheels.

VSKF - $300018x9-6 and 18x10.5 -5225/40 and 235/40 neutons black with chrome dish

cusco 2way diff - $750

fuel setup - $500

external pump, surge tank, magnaflow fuel filter, speedflow fittings for pump surgetank and filter

defi BF gauges x3 - $800

oil temp, oil pressure, water temp, control unit, light up white with black background

bride style seat with superlow rail - $450

s2 splitfires - $450

sms me for pics - 0433290801

Link to comment
https://www.sau.com.au/forums/topic/384532-parting-my-car/#findComment-6156637
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • sunsetR33
      R33 GTR lift points for hoist

      By sunsetR33 · Posted

      Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      As well as being risky WRT tipping off anyway. Yeah, I wouldn't expect it to move. Just measure from the rear one to the front one on the good side, then measure that same length on the wrecked side. You will find the notches in the pinchweld, and the jacking pad. Just spray a spot of marker paint or something there.
    • sunsetR33
      R33 GTR lift points for hoist

      By sunsetR33 · Posted

      but any other area than the bulge you are talking about will just cave in then? The front driver side is pretty bent so I don't know if that will work the way it is now. I can still kinda make out where that bulge is/was but it looks like the position of it also changed due to all the mistreatment? Hard to tell
    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      Absolutely. Look very closely at the photo (of yours) that I took my second snip of. See how the sill is thicker material right behind the pinchweld, where the two notches are? That is the factory reinforced area for lifting. That pad is supposed to carry the weight. The factory jack (go look at it, and how it interfaces with the car at the pinchweld) shows you exactly how the load is carried from the car to the jack to the ground.
×
×
  • Create New...