Jump to content
SAU Community

Oil Cooler Hose Replacment


Xcalabr
 Share

Recommended Posts

does any one know if a straight cooling hose will fit the hose that goes from the block to the oil cooler and what size diamater the hose needs to be ( i presume its the oil cooler its a little silver plate looking thing above the oil filter )

and if so how do i go about getting to it ? do i need to pull the manifold off tto get to the clamp underneth? its on a rb25 det any help will be appriciated only owned the skyline for a week or so now and not that familer with them yet

cheers daniel

Link to comment
Share on other sites

cant help you with the hose.

But i had to change my standard sandwich plate ( silver plate thing), i did it with the manifold on. a little bit tricky but youll get it, just make sure you replace the gasket and o rings with nissan gear so they dont leak

Link to comment
Share on other sites

thanks guys i ended up using a part available from sprint auto parts called a z hose and left the manifold on wasnt to hard and instead of $60 for thee hose only cost me $11 and did the same job cheers for your speedy responses

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
    • Finally had some time after working on other projects to jump back on this thing. Pulled all 4 wheels to check the brakes over and lucked out, only needed to bleed them/change fluid to get everything working!    Took it for its first quick spin (around 2km) up the road and ran great! Sounds like I have a left rear wheel bearing that needs replacing and there’s a shake in the steering wheel but the tires are absolutely junk on this thing and had been sitting flat when I went to first look at the car so we’ll see if that’s the cause.   Tach randomly started working but I notice if my hicas light comes on the tach stops working 🙃 yay for electrical gremlins 
    • Bunnings car park it is! if you buy the kind of dampers with the adjustable top on the strut you can see it, red, purple? So many options.
×
×
  • Create New...