Jump to content
SAU Community

Volk Racing Rims And 6 Semi Slicks

The Bogan
 Share

Recommended Posts

The Bogan Grand Master

The Bogan

Posted
Posted

4 x Volk Racing rims with all the plates and center caps, 17 x 9 with 4 x Dunlop Formula R DO1J 265/40R 17 and 2 x Kumho V70A 235/40R 17.

Still one or two track days left in the tyres, they have been stored indoors and had some grip put on them prior to my last outing, only used on the car at track days.

The offset is god knows, they fit under my GTS-T with rolled guards and some camber, you need at least -2 deg on the back and front to get inside the guards of a R33 GTS-T.

Will swap for MINT 17 x 8 Nissan wheels i.e 350Z or simular, maybe even R32 GTR rims (Im trying to keep it looking standardish)

Or $650

Pick up and/or inspect in Sydney.

Link to comment
https://www.sau.com.au/forums/topic/384618-volk-racing-rims-and-6-semi-slicks/
Share on other sites
The Bogan Grand Master

The Bogan

Posted
  • Author
Posted

God said "its about 100mm from the face that bolts to the disc hat to the outside lip", he would have been more helpful but said I've been a "bad boy" and that's all the info he will give me.

They are 2 piece rims.

I got the wheels from Peter at ADVAN performance a couple of years ago, they were on his GRACER car at Superlap 2009.

Hope that helps.

The Bogan Grand Master

The Bogan

Posted
  • Author
Posted

rim width is 253, distance from hub face to inside lip is 148.

So, 1/2 rim width of 126.5 - 148 = +21.5offset

I used Google for the calcs, they may not be right, if you like them try them on.

  • 1 month later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      HKS Vcam Step Pro Issues

      By joshuaho96 · Posted

      I have a VALCON if anyone wants it, I have no idea why you'd want to have VVT specifically broken out of the ECU as opposed to running it off the FCON/whatever standalone you have.
    • ChrisGtt
      R34 Gtt RB25det neo Issue After Modifications

      By ChrisGtt · Posted

      Hi Yes we're a bit optimistic we might get something out of sealing up the two pipes of the external wastegate and reactivating the stock one. I believe the orginal stock wastegate was tack welded shut. It doesn't budge and visually looks closed and sealed. The car has noticeably more lag so it could be at least part of the problem, maybe all. It's definately one of the key changes made since last tune. And it's one that's more difficult to fully understand and measure, not like for instance timing or cylinder compression.  Thanks for that feedback, we'll let you know how this progresses. Fingers crossed.   Regards Rob
    • GTSBoy
      HKS Vcam Step Pro Issues

      By GTSBoy · Posted

      VCT, yes.
    • PotatoCake
      HKS Vcam Step Pro Issues

      By PotatoCake · Posted

      Transplanting the vvt from a 25neo into an rb26?
    • GTSBoy
      R34 Gtt RB25det neo Issue After Modifications

      By GTSBoy · Posted

      Well, I was going to say, "Is the wastegate set up so that it is not leaking?" That's actually a different thing to what you're asking about. In theory, if you have allowed the two halves of the manifold to commmunicate (more than the stock manifold does - which is at least a little bit) then the negative effect should be apparent in delayed spool, not in outrigth power. OK, maybe just maybe, a badly set up twin scroll wastegate "crosstalk" might kill the top end, although it's hard to see how. What is happening with the original wastegate in the turbo? is it sealed off properly. If it's left flapping in the breeze, it will f**k everything up. If it is still there, and can be returned to service, I'd be capping off the external (presuming the two halves can and will be isolated from each other after doing so) and have a go with just the stock wastegate. I have an internal wastegate in my highflowed rear housing. The bigger opening and flapper should be fine to >250 rwkW. So there's not exactly a pressing reason to have the external. Done right, an external will give better results. Done wrong, it might just be possible to have worse results. Report back!
×
×
  • Create New...