Best A/r For A Gtx4294R

[Weapon X]

Looking for a close best. I'm changing over to a big single twin scroll.

sizes: 1.01

1.15

1.28

1.44

.

Changing injectors, Full Race manifold,4" exhaust ,Pump all the normal but here's the mod list as of now.

Engine mods:

Tomei stroker crankshaft

Crower rods

JE pistons

Apex’I AX 53B60 turbos with P21 housings

HKS exhaust manifolds

HKS O2 housings

HKS 1.5mm head gasket

HKS front mount intercooler

HKS hard pipe kit

Ferrera valvetrain

Tomei 270* cams, intake and exhaust

Tomei cam gears

Extreme Cylinder Head stage 5 port work

Nismo 3.5" exhaust

Nismo downpipes

Nismo 780cc injectors

Nismo fuel pump

AEM EMS V1 w/ wideband

[GTR260]

What engine?

[Weapon X]

RB26 2.8 stroker

[R31Nismoid]

It'd be 1.28 or 1.44 for that size turbo, if you intended on making the power.

1.15 if you wanted to pull response in, but loose a bit up top.

1.01 i don't think is even worth worrying about.

What has the builder/turbo people said about it?

What do you want from the setup?

[bigmikespec]

Go a bigger cam too.

[discopotato03]

Full Race Geoff played with RB26s some years ago so you could do well to ask him .

You should also at least look at T51Rs because they are essentially a GT4294R with arguably a more responsive T51 (I think) 76 trim turbine wheel . Its the one HKS uses and I pretty sure you can buy the same cartridge but with Garrett housings .

Your call but I would base the engine on an RB30 because every inch counts .

A .

[PJ.]

A 1.44 would be awesome for a V8

[260rsstagea]

i have a step 3 rb28 running same turbo and i use the 1.28 and have 280° 11.5 lift cams it makes 600hp on 18psi on bp98 and comes on boost at 6000rpm and it makes 800hp on 30psi on BP109 hope that helps any othe questions feel free to pm and i also run 1000cc injectors and two walbro 225 pumps

Edited December 3, 2011 by 260rsstagea