Jump to content
SAU Community

Recommended Posts

Sounds like you are getting ripped with the machining costs.

Injectors and water/meth. e85 is too much dicking around for my liking.

Yep, going to a different servo is sooo difficult. :P

Running a high end GTR on 98 is playing with fire IMO (no Pun intended), it feels like filling your car with a tank full of hand grenades.
You get a good tune, the AFR's and timing don't have much head room, you get a servo that dodgy's up the 98 with diluted 95 or 92 in it, which happens more than people realise.
You add in a hot day after you had it tuned in Winter, your at the track with water temps up, ambient air is up with a lower octane fuel than you thought you filled up on because of some scamming servo trying to rip people off and boom, it can be a recipe for disaster and it happens more than people realise.
An E85 setup for a few grand is one of the cheapest insurance policies you can have for longevity for your engine, let alone the performance increase.
You can't tune high boost levels over a max 24-25psi with 98, and between 24-30psi in my experience is where the GTX 2863's start to really show their abilities. -5's wouldn't really do much after 25psi anyway so it didn't matter so much.
Regardless of mods to any performance car, E85 is worth every day of the week.
I didn't make bugger all more power with my -5's when I tuned it on E85, but I was confdent I could race it at the track as hard as I want without a worry in the world.

When I was on 98 I would hear a knock here and there come through on bad batches of fuel with the check engine light coming through from the Haltech ECU, and with the inconsistency with the 98, I don't think it's worth it.
United are rolling out servos everywhere now with E92 and there should be no excuse now for saying ethanol is not easily available. Check the United website for Ethanol servos, they are popping up everywhere now.
When I sold my 34GTR recently it was driven from Brissy to Sydney easily between E85 servos. The other option for all those with a Haltech Platnum pro or the like, is you can use the sensor upgrade, it works a treat.
Drum E85 is a total waste of time and money, it is designed for a regulated racing series with consistency.
You can quite easily tune a car with a few HP less for head room and run the bowser stuff no problems at all. Buy a cheap Ethanol test kit, carry a 5L drum in the car with you, fill it, use the test kit for content level and you're safer than 98ron everyday of the week. I tried drum E85, never again, it is too much dicking around.

I took my car back got it tuned on Caltex E70-85 and lost like 15hp, so it was a no brainer for me, $1.14/litre for pump stuff, or $2.50-$3.00/litre for the drum for 15hp...........no thanks the bowser was just fine :)
Sorry about the big ramble again guys, I do get a bit carried away.

  • Like 1

Very well said :)

I looked at United servo list in Sydney a few weeks ago and unfortunately it is still limited here.

Caltex eflex however is more readily available.

Running a high end GTR on 98 is playing with fire IMO (no Pun intended), it feels like filling your car with a tank full of hand grenades.

You get a good tune, the AFR's and timing don't have much head room, you get a servo that dodgy's up the 98 with diluted 95 or 92 in it, which happens more than people realise.

You add in a hot day after you had it tuned in Winter, your at the track with water temps up, ambient air is up with a lower octane fuel than you thought you filled up on because of some scamming servo trying to rip people off and boom, it can be a recipe for disaster and it happens more than people realise.

An E85 setup for a few grand is one of the cheapest insurance policies you can have for longevity for your engine, let alone the performance increase.

You can't tune high boost levels over a max 24-25psi with 98, and between 24-30psi in my experience is where the GTX 2863's start to really show their abilities. -5's wouldn't really do much after 25psi anyway so it didn't matter so much.

Regardless of mods to any performance car, E85 is worth every day of the week.

I didn't make bugger all more power with my -5's when I tuned it on E85, but I was confdent I could race it at the track as hard as I want without a worry in the world.

When I was on 98 I would hear a knock here and there come through on bad batches of fuel with the check engine light coming through from the Haltech ECU, and with the inconsistency with the 98, I don't think it's worth it.

United are rolling out servos everywhere now with E92 and there should be no excuse now for saying ethanol is not easily available. Check the United website for Ethanol servos, they are popping up everywhere now.

When I sold my 34GTR recently it was driven from Brissy to Sydney easily between E85 servos. The other option for all those with a Haltech Platnum pro or the like, is you can use the sensor upgrade, it works a treat.

Drum E85 is a total waste of time and money, it is designed for a regulated racing series with consistency.

You can quite easily tune a car with a few HP less for head room and run the bowser stuff no problems at all. Buy a cheap Ethanol test kit, carry a 5L drum in the car with you, fill it, use the test kit for content level and you're safer than 98ron everyday of the week. I tried drum E85, never again, it is too much dicking around.

I took my car back got it tuned on Caltex E70-85 and lost like 15hp, so it was a no brainer for me, $1.14/litre for pump stuff, or $2.50-$3.00/litre for the drum for 15hp...........no thanks the bowser was just fine :)

Sorry about the big ramble again guys, I do get a bit carried away.

  • Like 1

Jimboomba, between Bris and GC, but west'er haha

Already have the water/meth kit from the previous zed, so I might as well use it.

Edited by MagicMikeZ32

Even if United placed a servo at the end of his street, he still wouldn't use ethanol, because the bogans up the road told him it was bad news. You just can't help some people Simon.

Very well said :)

I looked at United servo list in Sydney a few weeks ago and unfortunately it is still limited here.

Caltex eflex however is more readily available.

Agreed, well said.

I noticed there are plenty of United servos selling e85 that arent listed too.

Running a high end GTR on 98 is playing with fire IMO (no Pun intended), it feels like filling your car with a tank full of hand grenades.

You get a good tune, the AFR's and timing don't have much head room, you get a servo that dodgy's up the 98 with diluted 95 or 92 in it, which happens more than people realise.

You add in a hot day after you had it tuned in Winter, your at the track with water temps up, ambient air is up with a lower octane fuel than you thought you filled up on because of some scamming servo trying to rip people off and boom, it can be a recipe for disaster and it happens more than people realise.

An E85 setup for a few grand is one of the cheapest insurance policies you can have for longevity for your engine, let alone the performance increase.

You can't tune high boost levels over a max 24-25psi with 98, and between 24-30psi in my experience is where the GTX 2863's start to really show their abilities. -5's wouldn't really do much after 25psi anyway so it didn't matter so much.

Regardless of mods to any performance car, E85 is worth every day of the week.

I didn't make bugger all more power with my -5's when I tuned it on E85, but I was confdent I could race it at the track as hard as I want without a worry in the world.

When I was on 98 I would hear a knock here and there come through on bad batches of fuel with the check engine light coming through from the Haltech ECU, and with the inconsistency with the 98, I don't think it's worth it.

United are rolling out servos everywhere now with E92 and there should be no excuse now for saying ethanol is not easily available. Check the United website for Ethanol servos, they are popping up everywhere now.

When I sold my 34GTR recently it was driven from Brissy to Sydney easily between E85 servos. The other option for all those with a Haltech Platnum pro or the like, is you can use the sensor upgrade, it works a treat.

Drum E85 is a total waste of time and money, it is designed for a regulated racing series with consistency.

You can quite easily tune a car with a few HP less for head room and run the bowser stuff no problems at all. Buy a cheap Ethanol test kit, carry a 5L drum in the car with you, fill it, use the test kit for content level and you're safer than 98ron everyday of the week. I tried drum E85, never again, it is too much dicking around.

I took my car back got it tuned on Caltex E70-85 and lost like 15hp, so it was a no brainer for me, $1.14/litre for pump stuff, or $2.50-$3.00/litre for the drum for 15hp...........no thanks the bowser was just fine :)

Sorry about the big ramble again guys, I do get a bit carried away.

well all I got out of that is 'tune you're car on E85 and she won't go bang!'

Now that's been said I think I'm gonna take it to my tuner like ASAP.

I has Haltech platinum pro so looks like that ethanol sensor is gonna be coming my way :)

Hahahahah, thanks guys, " well all I got out of that is 'tune you're car on E85 and she won't go bang!"..........lol. The platinum pro is a good ECU and if you can source the Sensor from the States, it's just the GM version you'll save quite a few dollars I've been told, but I never tried the sensor because I was hooked on E85 all the time and I could never bring myself to even think about 98 ever again......lol.

It's a bit like tryres I suppose, once you have a set of 295 03G semi slicks, you are always on the hunt for the same level of grip :)

Anyway back to GTX 63's, the E85 will def allow the boost level increase so you can get your twins on song up around the 30psi mark. 33psi was max for me and was not yielding much more over 30-31psi. Different dump pipes, exhaust systems, cam profiles might get a little more boost top end, but probably yielding the efficiencies in the mid range would be my focus, especially not going to crazy with cams up at 272 degrees which I had. I should have gone back to a 260 really and keep a 11.0 lift. Big overlap cams are so over rated with turbo cars, I think it is a mentality that has come across from the world of Natural aspiration and drag racing cars with big automatic transmissions and stall converters, not forced induction.
I suppose a huge single for drag racing may benefit?

Hey Anthony, I only ran 1000cc ID injectors for the increased fuel flow with the E85 and was heaps for 478kw. I would probably try a different injector than the ID's, they haven't really had the best reputation from a lot of people and Ethanol for some reason, but the capacity at 1000cc is plenty. Have you got a good fuel system to deliver the increased fuel demand from ethanol? Also a dual entry fuel rail is essential too, in fact I reckon every GTR owner should have a dual entry rail, there is a reason the number 6 cylinder is the problem one :)
Man all theis talk about GTR's again makes me want my car back again, gee I would have liked to have kept on playing around with this.

Hahahahah, thanks guys, " well all I got out of that is 'tune you're car on E85 and she won't go bang!"..........lol. The platinum pro is a good ECU and if you can source the Sensor from the States, it's just the GM version you'll save quite a few dollars I've been told, but I never tried the sensor because I was hooked on E85 all the time and I could never bring myself to even think about 98 ever again......lol.

It's a bit like tryres I suppose, once you have a set of 295 03G semi slicks, you are always on the hunt for the same level of grip :)

Anyway back to GTX 63's, the E85 will def allow the boost level increase so you can get your twins on song up around the 30psi mark. 33psi was max for me and was not yielding much more over 30-31psi. Different dump pipes, exhaust systems, cam profiles might get a little more boost top end, but probably yielding the efficiencies in the mid range would be my focus, especially not going to crazy with cams up at 272 degrees which I had. I should have gone back to a 260 really and keep a 11.0 lift. Big overlap cams are so over rated with turbo cars, I think it is a mentality that has come across from the world of Natural aspiration and drag racing cars with big automatic transmissions and stall converters, not forced induction.

I suppose a huge single for drag racing may benefit?

Hey Anthony, I only ran 1000cc ID injectors for the increased fuel flow with the E85 and was heaps for 478kw. I would probably try a different injector than the ID's, they haven't really had the best reputation from a lot of people and Ethanol for some reason, but the capacity at 1000cc is plenty. Have you got a good fuel system to deliver the increased fuel demand from ethanol? Also a dual entry fuel rail is essential too, in fact I reckon every GTR owner should have a dual entry rail, there is a reason the number 6 cylinder is the problem one :)

Man all theis talk about GTR's again makes me want my car back again, gee I would have liked to have kept on playing around with this.

yeah E85 seems the way to go especially with it being available so close to me.

My car has HKS 1,000cc injectors, HKS fuel rail, Tomei FPR, Walbro 450 ltr p/m so fuel system is not fancy mate.

Anyways, glad you getting edgy about having another GTR.

Anyway, back to the GTX talk ;)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...