New Garrett Gtx2860R / 2863R / 2867R

[Mick_o]

So buy yours and turn the wick up and post some results!

Another GTX2860 running low psi, I Wish someone would just turn them up already.

My motor is almost ready lol

[mr skidz]

Thats the plan

[Wesley James R32GTR]

What is the highest recorded "realistic" figure being pushed on RB using -5/2530/-10/RS - 0.64 hot sides?

This is my car on -5's, E85, built 2.6 with all supporting mods.

Going 2863's as Garrett sells them with my old rear housings in the new year, hope to see improvement everywhere.

Edited January 7, 2016 by Wesley James R32GTR

[Wesley James R32GTR]

Has anyone run mph with these

This is my car as per the above. Forgot to mention I run 272 step 1 hks cams.

Hopefully the mph can improve with the new snails.

[infamous_t]

Going 2863's as Garrett sells them with my old rear housings in the new year, hope to see improvement everywhere.&&0){for(var>

With -5 front housings or are you changing your inlet setup to suit?

[Wesley James R32GTR]

Going the full hog mate. The way Garrett intended.

[SimonR32]

Going the full hog mate. The way Garrett intended.

So a single high mount?

[Wesley James R32GTR]

You know me mate, never one to follow what every man & his dog are doing. Plus it was the right price[emoji6]

[Dose Pipe Sutututu]

So a single high mount?

always the best option (when in TS, and twin screamers out the side or bonnet )

[mr skidz]

Are people not getting harassed by police after they see a big single slapped on the side of the engine?

The way I see it I'd rather have as much as possible and hidden away rather then eek out an extra 200~300hp crack the gate once get pulled over and defected then put it back to stock to pass it all.

Been there before its a massive head f**k!

Or are the popo a little more relaxed these days, just curious?

every 20min something with a gate is screaming past my house

Edited January 12, 2016 by mr skidz

[Piggaz]

No need for homo gate rubbish. Plumb it back

[mr skidz]

No need for homo gate rubbish. Plumb it back

that's un Australian. Wash your mouth out immediately lol

[mr skidz]

Piggaz hates sound of open gate and goes single,

I love open gate sounds and went -5's lol

[Dose Pipe Sutututu]

No need for homo gate rubbish. Plumb it back

Don't be jelly, you love gate deep down inside like how you love big singles 7 years ago and it took you till now to come out of the closet

[iruvyouskyrine]

Gate is love. Gate is life. Plumback should be a defect, Not the other way round.

[Leroy Peterson]

I'm so glad I don't hear gate on the street... Save it for the racetrack or "private roads"

[sneakey pete]

I don't like the tone of screamer pipes, much prefer the tone and sound of it coming out of an exhaust.
speaking of gates, I should probably get some 15psi garrett actuators for my turbos instead of using the 10psi tomei ones shouldn't i?...

[Dose Pipe Sutututu]

I don't like the tone of screamer pipes, much prefer the tone and sound of it coming out of an exhaust.

speaking of gates, I should probably get some 15psi garrett actuators for my turbos instead of using the 10psi tomei ones shouldn't i?...

rule of thumb (for myself that is) 75% or so of your targeted max. desired boost.. so say you want to run 2 bar, get 1.5 bar actuators or so.

[sneakey pete]

Not sure i could get away with 1.5bar for when I need to run the car on 98

[MagicMikeZ32]

Sure you can. 22pound?

Edited January 12, 2016 by MagicMikeZ32